BMW 3 (E46). Manual — part 191
-
For rear trim panel: Pry out
window switch at top of armrest.
Pry off concealing plugs (arrows) from
under armrest.
Remove door panel retaining screws
(arrows).
Unclip door panel from door perimeter
using a trim panel tool. Pull panel
retaining clips off one at a time.
Pry off inside door release Bowden
cable at end of clip (arrow).
Pull off panel: Detach cable from
interior door release lever.
-
Disconnect radio speaker harness
connector.
-
Installation is reverse of removal,
noting the following:
Replace any damaged plastic
parts or clips.
Renew vapor barrier if it is
damaged.
Use new mounting bolts when
reinstalling side-impact airbag to
door.
When installing door panel, align
metal retainers on window sill with
openings on top of door panel.
Check door-lock mechanism and
window for ease of movement.
Rear side trim panel, removing
and installing (Coupe model)
-
Remove rear seat cushion.
Remove rear backrest side
section. See
520 Seats
.
Using a trim tool, gently pry up door
threshold trim. Starting at A-pillar,
press radius of trim downwards while
sliding trim forward off trim clips.
Remove clips from body using pliers.
Save for installation.
-
Remove trim plugs on armrest.
Remove panel mounting screws.
-
Gently pry off panel using trim
tool.
-
Disconnect electrical harness
connectors as necessary. Remove
side panel by lifting up and toward
interior.
-
Installation is reverse of removal.
Replace any damaged plastic
parts or clips.
Rear side trim panels,
removing and installing
(Convertible model)
-
Remove rear seat cushion.
Remove rear backrest side
section. See
520 Seats
.
-
Lower side windows; open
convertible roof.
-
Remove side panel insert:
Remove trim plugs on side panel
armrest.
Remove insert panel retaining
screws.
Gently pry side panel insert from
upper and lower side panels.
Disconnect electrical harness
connectors as necessary.
-
Remove upper side trim panel:
Remove trim retaining rivet from
upper corner at door. Pull trim cap
upwards from weather-stripping.
Unhook spring from linkage at
convertible top.
Remove retaining screws from
lower edge of upper panel.
Gently pull weather-stripping from
rear edge of upper panel as
necessary.
Pry up on upper panel and
remove.
-
Remove lower side trim panel:
Gently pry lower side trim panel
from body.
Make sure to feed lower front
corner of side trim panel out from
door threshold trim.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст