Hummer H3. Manual — part 364
Fig. 303: Identifying Intake Manifold & Attachments
Courtesy of GENERAL MOTORS CORP.
46. Connect the MAP sensor wiring harness retainer (4) to the intake manifold.
47. Install the MAP sensor. Refer to Manifold Absolute Pressure Sensor Replacement .
48. Install the oil level indicator and tube. Refer to Oil Level Indicator and Tube
Replacement.
49. Connect the EVAP pipe at the purge solenoid. Refer to Plastic Collar Quick Connect
Fitting Service .
50. Connect the fuel feed pipe to the fuel rail. Refer to Metal Collar Quick Connect Fitting
Service .
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 304: Identifying Engine Wiring Harness Retainer At Engine Wiring Harness
Bracket
Courtesy of GENERAL MOTORS CORP.
51. Connect the engine wiring harness retainer to the engine wiring harness bracket.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 305: Identifying Right Engine Mount-To-Frame Bracket Bolt
Courtesy of GENERAL MOTORS CORP.
52. Install the right engine mount-to-frame bracket bolt.
Tighten: Tighten the engine mount-to-frame bracket bolt to 85 N.m (63 lb ft).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 306: View Of Power Steering Pump & Mounting Bolts
Courtesy of GENERAL MOTORS CORP.
53. Position the power steering pump to the power steering pump bracket.
54. Install the power steering pump mounting bolts.
Tighten: Tighten the power steering pump mounting bolts to 25 N.m (18 lb ft).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст