Hummer H3. Manual — part 363
Fig. 299: Locating Battery Negative Cable Ground Terminal
Courtesy of GENERAL MOTORS CORP.
40. Install the bolt (5) securing the battery negative cable ground terminal (4) to the engine
block.
Tighten: Tighten the battery negative cable to engine block bolt to 35 N.m (26 lb ft).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 300: Locating Positive Battery Cable
Courtesy of GENERAL MOTORS CORP.
41. Connect the battery positive cable (2) to the starter and install the starter terminal nut (1).
Tighten: Tighten the battery positive cable to starter terminal nut to 9 N.m (80 lb in).
42. Connect the lead (4) to the starter solenoid and install the starter solenoid "S" terminal nut
(3).
Tighten: Tighten the starter solenoid "S" terminal nut to 3.5 N.m (31 lb in).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 301: View Of Wiring Harness Retainers
Courtesy of GENERAL MOTORS CORP.
43. Secure the following wiring harness retainers to the engine wiring harness bracket:
The battery cable
The engine (4, 6)
The MAP sensor (5)
44. Lower the vehicle.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 302: Locating Left Engine Mount-To-Frame Bracket Through Bolt
Courtesy of GENERAL MOTORS CORP.
45. Install the left engine mount-to-frame bracket bolt.
Tighten: Tighten the engine mount-to-frame bracket bolt to 85 N.m (63 lb ft).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст