Hummer H3. Manual — part 261
3. Install the oil level indicator tube stud.
Tighten: Tighten the oil level indicator tube stud to 10 N.m (89 lb in).
4. Install the oil level indicator.
POWER STEERING PUMP BRACKET INSTALLATION
Fig. 655: View Of Power Steering Pump Bracket
Courtesy of GENERAL MOTORS CORP.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
1. Install the power steering pump bracket.
2. Install the power steering pump bracket bolts.
Tighten: Tighten the power steering pump bracket bolts to 50 N.m (37 lb ft).
DRIVE BELT TENSIONER INSTALLATION
Fig. 656: View Of Drive Belt Tensioner
Courtesy of GENERAL MOTORS CORP.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
1. Install the drive belt tensioner.
2. Install the drive belt tensioner bolt.
Tighten: Tighten the drive belt tensioner bolt to 50 N.m (37 lb ft).
DRIVE BELT IDLER PULLEY INSTALLATION
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
Fig. 657: Drive Belt Idler Pulley
Courtesy of GENERAL MOTORS CORP.
1. Install the drive belt idler pulley.
2. Install the drive belt idler pulley bolts.
Tighten: Tighten the drive belt idler pulley bolts to 50 N.m (37 lb ft).
CRANKSHAFT REAR OIL SEAL INSTALLATION
Tools Required
J 44215 Rear Seal Installer. See Special Tools.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст