Hummer H3. Manual — part 1729

Fig. 84: Applying Glass Prep
Courtesy of GENERAL MOTORS CORP.

15. Apply a second coat of the glass prep clear #1 to the same area of the glass.

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3

Fig. 85: Applying Glass Primer
Courtesy of GENERAL MOTORS CORP.

16. Shake the glass primer black #2 for at least 1 minute.

17. Use a new dauber in order to apply the glass primer black #2 to the same areas (2) that glass

prep clear #1 was applied.

18. Allow the glass primer to dry for approximately 10 minutes.

IMPORTANT: The glass primer black #2 is effective up to 8 hours after

applying it to the glass. The primed surface of the glass must
be kept clean.

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3

Fig. 86: View Of Modified Applicator Nozzle
Courtesy of GENERAL MOTORS CORP.

19. Cut the applicator nozzle in order to provide a minimum urethane bead of 8 mm (0.31 in)

wide and 13 mm (0.5 in) high.

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3

Fig. 87: Applying Bead Of Urethane Adhesive
Courtesy of GENERAL MOTORS CORP.

20. Use a cartridge-type caulking gun in order to apply a smooth, continuous bead of urethane

adhesive.

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3