Hummer H3. Manual — part 936
Fig. 7: Locating Cruise Control Release Switch Electrical Connector
Courtesy of GENERAL MOTORS CORP.
6. Connect the cruise control release switch electrical connector (1).
7. The switch is properly adjusted when there is 7 mm (0.28 in) clearance between the end of
the barrel and the striker plate.
CRUISE RELEASE SWITCH REPLACEMENT
Removal Procedure
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Cruise Control - H3
Fig. 8: Locating Cruise Control Release Switch Electrical Connector
Courtesy of GENERAL MOTORS CORP.
1. Disconnect the cruise control release switch electrical connector (1).
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Cruise Control - H3
Fig. 9: Identifying Cruise Release Switch
Courtesy of GENERAL MOTORS CORP.
2. Complete the following in order to remove the cruise release switch from the brake pedal
bracket:
1. Rotate the switch counterclockwise.
2. Pull the switch from the retainer.
3. Push the locking tabs inward to release the retainer.
Installation Procedure
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Cruise Control - H3
Fig. 10: Identifying Cruise Release Switch
Courtesy of GENERAL MOTORS CORP.
Adjust the cruise control release switch. Refer to Cruise Release Switch Adjustment.
CLUTCH PEDAL CRUISE CONTROL RELEASE SWITCH ADJUSTMENT
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Cruise Control - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст