Hummer H3. Manual — part 1726
Fig. 74: Applying Bead Of Urethane Adhesive
Courtesy of GENERAL MOTORS CORP.
20. Use a cartridge-type caulking gun in order to apply a smooth, continuous bead of urethane
adhesive.
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3
Fig. 75: Applying Urethane Adhesive To Inner Surface Of Window
Courtesy of GENERAL MOTORS CORP.
21. Use the edge of the window as a guide for the nozzle in order to apply the urethane adhesive
(1) to the inner surface of the window (3).
22. With the aid of an assistant, place the window in the opening.
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3
Fig. 76: Aligning Tape Lines On Window To Body
Courtesy of GENERAL MOTORS CORP.
23. Align the masking tape (1) lines on the window (2) and the body.
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3
Fig. 77: Pressing Window Into Place
Courtesy of GENERAL MOTORS CORP.
24. Press firmly around the entire periphery of the window in order to wet-out the urethane
bead.
25. Tape the window to the body in order to minimize movement until the urethane adhesive
cures.
NOTE:
Avoid damage to the window from impacting objects due to an
exposed edge. The window must be 1 mm (0.025 in) below the
surface of the sheet metal to avoid window damage.
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст