Hummer H3. Manual — part 1603
Fig. 26: Using J 21474-01
Courtesy of GENERAL MOTORS CORP.
4. Remove the spring shackle bushing using J 21474-01 .
Installation Procedure
2007 Hummer H3
2007 SUSPENSION Rear Suspension - H3
Fig. 27: Using J 21474-01
Courtesy of GENERAL MOTORS CORP.
1. Install the new spring shackle bushing using J 21474-01 .
2007 Hummer H3
2007 SUSPENSION Rear Suspension - H3
Fig. 28: View Of Bushing Flange
Courtesy of GENERAL MOTORS CORP.
2. Pull the spring shackle bushing into the frame rail until the flanged portion of the spring
shackle bushing is flush with the rail.
2007 Hummer H3
2007 SUSPENSION Rear Suspension - H3
Fig. 29: View Of Spring Shackle Bushing Inner Flange
Courtesy of GENERAL MOTORS CORP.
3. Use a blunt punch to stake or flare the spring shackle bushing inner flange.
4. Install the spare tire when servicing the left side bushing.
5. Install the spring shackle. Refer to Spring Shackle Replacement.
WHEEL STUD REPLACEMENT
Tools Required
J 43631 Ball Joint Remover
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2007 Hummer H3
2007 SUSPENSION Rear Suspension - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст