Hummer H3. Manual — part 248
1. Install the timing chain tensioner.
2. Install the timing chain tensioner bolts.
Tighten: Tighten the timing chain tensioner bolts to 25 N.m (18 lb ft).
Fig. 608: View Of Timing Chain Guide & Bolts
Courtesy of GENERAL MOTORS CORP.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
3. Install the timing chain tensioner guide.
4. Install the timing chain tensioner guide bolts.
Tighten: Tighten the timing chain tensioner guide bolts to 18 N.m (13 lb ft).
Fig. 609: View Of Timing Chain Tensioner Shoe & Bolt
Courtesy of GENERAL MOTORS CORP.
5. Install the timing chain tensioner shoe.
6. Install the timing chain tensioner shoe bolt.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
Tighten: Tighten the timing chain tension shoe bolt to 25 N.m (18 lb ft).
Fig. 610: View Of Cylinder Head Access Hole Plugs
Courtesy of GENERAL MOTORS CORP.
7. Install the cylinder head access hole plugs.
Tighten: Tighten the cylinder head access hole plugs to 5 N.m (44 lb in).
TIMING CHAIN AND SPROCKETS INSTALLATION
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
Tools Required
J 44221 Camshaft Holding Tool. See Special Tools.
J 45059 Angle Meter. See Special Tools.
Fig. 611: View Of J 44221 Installed On Camshafts
Courtesy of GENERAL MOTORS CORP.
1. Install J 44221 with the camshaft flats up and the number 1 cylinder at top dead center. See
Special Tools. The crankshaft pin should be at 12 o'clock when the number 1 piston is at
top dead center.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст