Hummer H3. Manual — part 247
Fig. 604: Installing J 44221 To Camshafts
Courtesy of GENERAL MOTORS CORP.
4. Install J 44221 with the camshaft flats up and the number 1 cylinder at top dead center. See
Special Tools.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
Fig. 605: View Of Camshaft Caps
Courtesy of GENERAL MOTORS CORP.
5. Install the exhaust camshaft caps.
6. Install the intake camshaft caps.
IMPORTANT: Install the same camshaft cap onto the same camshaft
journal from which it was removed. The camshaft caps are
pin stamped for direction and numerical order.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
7. Install the camshaft cap bolts. Tighten the bolts evenly in order to compress the valve
springs before final torque.
Tighten: Tighten the camshaft cap bolts to 12 N.m (106 lb in).
8. Remove J 44221 . See Special Tools.
ENGINE LIFT BRACKET INSTALLATION
Fig. 606: Installing Engine Lift Bracket
Courtesy of GENERAL MOTORS CORP.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
1. Install the engine lift bracket.
2. Install the engine lift bracket bolts in sequence.
Tighten:
Tighten the engine lift bracket bolts a first pass in sequence to 5 N.m (44 lb in)
Tighten the engine lift bracket bolts a final pass in sequence to 50 N.m (37 lb ft)
TIMING CHAIN TENSIONER INSTALLATION
Fig. 607: View Of Timing Chain Tensioner
Courtesy of GENERAL MOTORS CORP.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2006 Hummer H3
2006 ENGINE Engine Mechanical - 3.5L (L52) - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст