Hummer H3. Manual — part 1712
Fig. 28: Identifying Windshield
Courtesy of GENERAL MOTORS CORP.
10. With the aid of an assistant remove the window from the vehicle.
Installation Procedure
1. Install the windshield into the opening. Refer to Adhesive Installation of Stationary
Windows.
2. Install the cowl air inlet grille panel. Refer to Non-Functional Air Inlet Grille Panel
Replacement .
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3
Fig. 29: Identifying Windshield
Courtesy of GENERAL MOTORS CORP.
3. Install the window side reveal moldings to the vehicle. Refer to Windshield Side Reveal
Molding Replacement .
4. Install the window wiper arms. Refer to Windshield Wiper Arm Replacement .
5. Install the rearview mirror. Refer to Inside Rearview Mirror Replacement .
6. Close the hood.
7. Remove the double layer of masking tape around the perimeter of the painted surfaces and
the interior trim.
WINDSHIELD REVEAL MOLDING REPLACEMENT
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3
The windshield reveal molding is an applied molding design separate from the window. The
reveal molding is bonded to the windshield and may be bonded to the body. The reveal molding
may be replaced with the windshield as an assembly or the reveal molding may be available as a
separate service part. Refer to Adhesive Installation of Stationary Windows.
FRONT SIDE DOOR WINDOW REPLACEMENT
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3
Fig. 30: Window Replacement - Front Door
Courtesy of GENERAL MOTORS CORP.
Front Side Door Window Replacement
Callout
Component Name
NOTE:
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Fixed and Moveable Windows - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст