Hummer H3. Manual — part 292

Fig. 42: View Of Engine Mount
Courtesy of GENERAL MOTORS CORP.

9. Remove the engine mount bolts.

10. Remove the engine mount. You will need to articulate the mount in order to remove the

mount.

Installation Procedure

1. Install the engine mount. You will need to articulate the mount in order to install the mount.

2007 Hummer H3

2007 ENGINE Engine Mechanical - 3.7L - H3

Fig. 43: View Of Engine Mount
Courtesy of GENERAL MOTORS CORP.

2. Install the engine mount bolts until snug, following the installation sequence.

3. Tighten the bolts.

Tighten: Tighten the bolts to 50 N.m (37 lb ft).

Lower the engine.

NOTE:

Refer to Fastener Notice .

2007 Hummer H3

2007 ENGINE Engine Mechanical - 3.7L - H3

Fig. 44: Locating Left Engine Mount-To-Frame Bracket Through Bolt
Courtesy of GENERAL MOTORS CORP.

4. Install the left engine mount-to-frame bracket through bolt.

Tighten: Tighten both of the engine mount-to-frame bracket bolts to 85 N.m (63 lb ft).

5. Remove the jack stand.

2007 Hummer H3

2007 ENGINE Engine Mechanical - 3.7L - H3

6. Install the lower intermediate steering shaft. Refer to Lower Intermediate Steering Shaft

Replacement .

7. Install the engine shield, if equipped. Refer to Engine Shield Replacement .

8. Install the wheel and tire assembly. Refer to Tire and Wheel Removal and Installation .

9. Lower the vehicle.

ENGINE MOUNT REPLACEMENT - RIGHT SIDE

Removal Procedure

1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle .

2. Remove the tire and wheel assembly. Refer to Tire and Wheel Removal and

Installation .

3. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .

4. Support the engine using a jack stand and a block of wood.

2007 Hummer H3

2007 ENGINE Engine Mechanical - 3.7L - H3