Hummer H3. Manual — part 1743
WINDSHIELD WASHER HOSE REPLACEMENT
Fig. 19: Hose Replacement - Windshield Washer
Courtesy of GENERAL MOTORS CORP.
Windshield Washer Hose Replacement
(Right Hand Drive) .
1
Windshield Washer Solvent Container Bolts
Tighten: 9 N.m (80 lb in)
2
Air Inlet Panel Rear Washer Hose
Tip: Disconnect the hose at the plenum.
3
Rear Window Washer Solvent Container Hose Assembly
Tip: Disconnect the hose elbow from the rear washer pump spout.
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Wipers and Washers - H3
REAR WINDOW WASHER NOZZLE HOSE REPLACEMENT
Fig. 20: Washer Hose Replacement - Rear
Courtesy of GENERAL MOTORS CORP.
Callout
Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.
Preliminary Procedures
1. Remove the front wiper arms. Refer to Windshield Wiper Arm Replacement.
2. Remove the lower air inlet grille panel. Refer to Air Inlet Grille Panel
Replacement (Upper) or Air Inlet Grille Panel Replacement (Lower).
1
Hose, Windshield Washer (Qty: 1)
Tip:
Remove the hose T-connection and elbow from the washer nozzles.
Remove the hose from the lower air inlet grille panel retainers.
2
Nozzle, Windshield Washer (Qty: 2)
Tip: Squeeze the washer nozzle tabs and push the nozzle outward from the
lower air inlet grille panel.
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Wipers and Washers - H3
Rear Window Washer Nozzle Hose Replacement
WASHER SOLVENT CONTAINER REPLACEMENT (PRIOR TO VIN 78135604)
Removal Procedure
Callout
Component Name
Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.
Preliminary Procedure
1. Remove the rear wiper motor. Refer to Rear Window Wiper Motor Replacement.
2. Remove the left body side trim. Refer to Body Side Trim Panel Replacement - Left
Side .
1
Hose, Bodyside Electrical Harness Washer (Qty: 1)
Tip: Release connector claws from rear washer hose connection.
2
Hose, Rear Windshield Washer (Qty: 1)
Tip: Pull the washer hose rearward from the end gate and out from the
washer elbow opening.
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Wipers and Washers - H3
Fig. 21: Identifying Washer Solvent Container
Courtesy of GENERAL MOTORS CORP.
1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement
2. Remove the washer container to front wheelhouse upper extension bolts (1).
3. Disconnect the coolant overflow hose (2) from the wheelhouse upper extension retainer
clips.
4. Pinch the coolant hose to prevent coolant loss and remove the hose.
2007 Hummer H3
2007 ACCESSORIES & EQUIPMENT Wipers and Washers - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст