Hummer H3. Manual — part 1742

Fig. 16: Hose Replacement - Windshield Washer
Courtesy of GENERAL MOTORS CORP.

Windshield Washer Nozzle Replacement

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedures

1. Remove the front wiper arms. Refer to Windshield Wiper Arm Replacement.

2. Remove the lower air inlet grille panel. Refer to Air Inlet Grille Panel

Replacement (Upper) or Air Inlet Grille Panel Replacement (Lower).

Hose, Windshield Washer

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Wipers and Washers - H3

WASHER SOLVENT CONTAINER HOSE REPLACEMENT (FRONT HOSE)

Fig. 17: Washer Solvent Container Hose Replacement (Front Hose)
Courtesy of GENERAL MOTORS CORP.

Washer Solvent Container Hose Replacement (Front Hose)

1

Tip:

1. Remove the hose T-connection and elbow from both washer nozzles.

2. Remove the hose from the lower air inlet grille panel retainers.

IMPORTANT:

The windshield washer nozzles are serviced with the front windshield washer hose.

2

Nozzle, Windshield Washer (Qty: 2)
Tip: Squeeze the washer nozzle tabs and push the nozzle outward from the
lower air inlet grille panel.

Callout

Component Name

NOTE:

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Wipers and Washers - H3

WASHER SOLVENT CONTAINER HOSE REPLACEMENT (REAR HOSE)

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedure

1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .

2. Remove the coolant recovery reservoir. Refer to Coolant Recovery Reservoir

Replacement (Left Hand Drive) or Coolant Recovery Reservoir Replacement
(Right Hand Drive) .

Refer to Fastener Notice .

1

Windshield Washer Solvent Container Bolts

Tighten: 9 N.m (80 lb in)

2

Air Inlet Panel Front Washer Hose
Tip: Disconnect the hose at the plenum.

3

Front Window Washer Solvent Container Hose Assembly
Tip: Disconnect the hose elbow from the rear washer pump spout.

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Wipers and Washers - H3

Fig. 18: Washer Solvent Container Hose Replacement (Rear Hose)
Courtesy of GENERAL MOTORS CORP.

Washer Solvent Container Hose Replacement (Rear Hose)

Callout

Component Name

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedure

1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .

2. Remove the coolant recovery reservoir. Refer to Coolant Recovery Reservoir

Replacement (Left Hand Drive) or Coolant Recovery Reservoir Replacement

NOTE:

Refer to Fastener Notice .

2007 Hummer H3

2007 ACCESSORIES & EQUIPMENT Wipers and Washers - H3