Hummer H3. Manual — part 1269
IMPORTANT:
Always note the orientation of the relay.
Make sure the electrical center is secure, as not to put
added stress on the wires or terminals.
2007 Hummer H3
2007 HVAC Heating, Ventilation and Air Conditioning - H3
Fig. 21: Removing/Installing Relay Using J 43244
Courtesy of GENERAL MOTORS CORP.
3. Using the J 43244 (1) position the tool on opposing corners of the compressor relay (2).
2007 Hummer H3
2007 HVAC Heating, Ventilation and Air Conditioning - H3
4. Remove the compressor relay (2) from the electrical center.
Installation Procedure
NOTE:
Use J43244 to pull the relay straight out from the electrical
center terminals. The use of pliers or a flat bladed tool could
damage the electrical center.
2007 Hummer H3
2007 HVAC Heating, Ventilation and Air Conditioning - H3
Fig. 22: Removing/Installing Relay Using J 43244
Courtesy of GENERAL MOTORS CORP.
1. Install the compressor relay (2) in the same position as removed.
2007 Hummer H3
2007 HVAC Heating, Ventilation and Air Conditioning - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст