Hummer H3. Manual — part 1008
3. Support the leafs springs with jack stands.
Fig. 97: View Of Rear Axle Assembly
Courtesy of GENERAL MOTORS CORP.
19. With the aid of an assistant and using a transmission jack stand and the remove the rear axle
assembly from the vehicle.
Installation Procedure
2007 Hummer H3
2007 Driveline/Axle Rear Drive Axle - H3
Fig. 98: View Of Rear Axle Assembly
Courtesy of GENERAL MOTORS CORP.
1. Using a transmission jack stand and the aid of an assistant, position the read drive axle over
the rear leaf springs.
2007 Hummer H3
2007 Driveline/Axle Rear Drive Axle - H3
Fig. 99: View Of Rear Leaf Spring Shackles
Courtesy of GENERAL MOTORS CORP.
2. Install the rear leaf spring shackles.
NOTE:
Refer to Fastener Notice .
2007 Hummer H3
2007 Driveline/Axle Rear Drive Axle - H3
Tighten: Tighten the shackle bolt and nut to 85 N.m (63 lb ft).
3. Remove the jack stands.
Fig. 100: View Of U-Bolt
Courtesy of GENERAL MOTORS CORP.
4. Position the U-bolts on the rear axle housing.
5. Position the anchor plates on the leaf springs.
2007 Hummer H3
2007 Driveline/Axle Rear Drive Axle - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст