Hummer H3. Manual — part 294
6. Remove the jack stand.
7. Install the engine shield, if equipped. Refer to Engine Shield Replacement .
8. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
9. Lower the vehicle.
ENGINE LIFT BRACKET REPLACEMENT
Removal Procedure
Fig. 49: View Of Engine Lift Bracket & Attachments
Courtesy of GENERAL MOTORS CORP.
1. Remove the drive belt. Refer to Drive Belt Replacement (Without A/C) or Drive Belt
Replacement (With A/C).
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
2. Remove the bolt (3) securing the A/C compressor hose/pipe bracket (2) to the engine lift
bracket (1).
3. Carefully disengage the engine wiring harness conduit from the engine lift bracket (1).
Fig. 50: View Of Generator & Mounting Bolts
Courtesy of GENERAL MOTORS CORP.
4. Remove the 3 generator bolts and reposition the generator.
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 51: Removing Engine Lift Bracket
Courtesy of GENERAL MOTORS CORP.
5. Remove the engine lift bracket bolts.
6. Remove the engine lift bracket.
Installation Procedure
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Fig. 52: Installing Engine Lift Bracket
Courtesy of GENERAL MOTORS CORP.
1. Position the engine lift bracket.
2. Install the engine lift bracket bolts.
Tighten:
1. Tighten the bolts a first pass in sequence to 5 N.m (44 lb in).
NOTE:
Refer to Fastener Notice .
2007 Hummer H3
2007 ENGINE Engine Mechanical - 3.7L - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст