Hummer H3. Manual — part 1594
J-25034-C
Power Steering Pulley Remover
J-34028
Inner Tie Rod Wrench
2007 Hummer H3
2007 STEERING Power Steering - H3
J-36660-A
Torque Angle Meter
J-42640
Steering Column Lock Pin
J-44586
Power Steering Gear Oil Seal
Remover/Installer
2007 Hummer H3
2007 STEERING Power Steering - H3
J-45101
Hub and Wheel Runout Gage
2007 Hummer H3
2007 STEERING Power Steering - H3
2007 SUSPENSION
Rear Suspension - H3
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
REPAIR INSTRUCTIONS
STABILIZER SHAFT REPLACEMENT
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Support the rear axle at curb height.
Application
Specification
Metric
English
Leaf Spring to Front Bracket Nut
125 N.m
92 lb ft
Leaf Spring U-Bolt Nuts
76 N.m
56 lb ft
Spring Shackle to Frame Nut
85 N.m
63 lb ft
Spring Shackle to Leaf Spring Nut
85 N.m
63 lb ft
Shock Absorber Lower Bolt
95 N.m
70 lb ft
Shock Absorber Upper Bolts
35 N.m
26 lb ft
Stabilizer Bar Lower Link Nut
80 N.m
59 lb ft
Stabilizer Bar Upper Link to Frame Nut
80 N.m
59 lb ft
Stabilizer Clamp Bolts
50 N.m
37 lb ft
IMPORTANT: Do not attempt to hold the stabilizer shaft link near the boot.
Use the hex feature on the end of the stud. Failure to do so
could damage the boot.
2007 Hummer H3
2007 SUSPENSION Rear Suspension - H3
2007 Hummer H3
2007 SUSPENSION Rear Suspension - H3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст