Hummer H2. Manual — part 1137
Fig. 47: Starter Heat Shield
Courtesy of GENERAL MOTORS CORP.
14. Remove the starter heat shield.
Installation Procedure
2004 Hummer H2
2004 ELECTRICAL Engine Electrical - Hummer H2
Fig. 48: Starter Heat Shield
Courtesy of GENERAL MOTORS CORP.
1. Install the starter heat shield.
2004 Hummer H2
2004 ELECTRICAL Engine Electrical - Hummer H2
Fig. 49: Transmission Cover & Starter
Courtesy of GENERAL MOTORS CORP.
2. Snap the transmission cover to the starter.
2004 Hummer H2
2004 ELECTRICAL Engine Electrical - Hummer H2
Fig. 50: Positive Cable Nut
Courtesy of GENERAL MOTORS CORP.
3. Install the positive cable to the starter.
4. Install the positive cable nut (2).
Tighten: Tighten the positive cable nut to 9 N.m (80 lb in).
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ELECTRICAL Engine Electrical - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст