Hummer H2. Manual — part 930
3. Remove the ring gear bolts. Discard the bolts.
Fig. 93: Removing Ring Gear From Differential Case
Courtesy of GENERAL MOTORS CORP.
4. Remove the ring gear from the differential case.
Drive the ring gear off with a brass drift if necessary.
NOTE:
Do not pry the ring gear from the differential case. Prying the ring gear
from the differential case may cause damage to the ring gear and/or the
differential case.
2004 Hummer H2
2004 DRIVELINE/AXLE Front Drive Axle - Hummer H2
Fig. 94: Pinion Shaft Lock Bolt
Courtesy of GENERAL MOTORS CORP.
5. Remove the pinion shaft lock bolt.
2004 Hummer H2
2004 DRIVELINE/AXLE Front Drive Axle - Hummer H2
Fig. 95: View Of Differential Components
Courtesy of GENERAL MOTORS CORP.
6. Remove the pinion shaft.
7. Remove the differential side gear spacers.
2004 Hummer H2
2004 DRIVELINE/AXLE Front Drive Axle - Hummer H2
Fig. 96: Differential Pinion Gears & Thrust Washers
Courtesy of GENERAL MOTORS CORP.
8. Remove the differential pinion gears and thrust washers by performing the following steps:
1. Drive the pinion gear thrust washers out from the differential case using a hammer and a brass drift.
2. Roll the differential pinion gears out of the differential case.
Mark the pinion gears and thrust washers top and bottom.
2004 Hummer H2
2004 DRIVELINE/AXLE Front Drive Axle - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст