Hummer H2. Manual — part 1878
Fig. 664: Engine Valley Cover & Gasket
Courtesy of GENERAL MOTORS CORP.
2. Install the valley cover and NEW gasket.
3. Install the valley cover bolts.
Tighten: Tighten the valley cover bolts to 25 N.m (18 lb ft).
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 665: Knock Sensors
Courtesy of GENERAL MOTORS CORP.
4. Install the knock sensors.
Tighten: Tighten the knock sensors to 20 N.m (15 lb ft).
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 666: Knock Sensor Wire Harness
Courtesy of GENERAL MOTORS CORP.
5. Install the knock sensor wire harness.
COOLANT AIR BLEED PIPE INSTALLATION
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 667: View Of Pipe & Cover Gasket
Courtesy of GENERAL MOTORS CORP.
1. Install the gaskets onto the engine coolant air bleed pipe and covers.
IMPORTANT:
z
Install the pipe gaskets properly onto the pipe and covers.
z
Position the gasket O-ring seal onto the nipple portion of the pipe.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст