Hummer H2. Manual — part 1877
Fig. 660: Valve Rocker Arm Cover Gasket
Courtesy of GENERAL MOTORS CORP.
4. Install a NEW cover gasket (504) into the right valve rocker arm cover.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 661: Valve Rocker Arm Cover & Bolts (Right)
Courtesy of GENERAL MOTORS CORP.
5. Install the valve rocker arm cover onto the cylinder head.
6. Install the cover bolts with grommets.
Tighten: Tighten the valve rocker arm cover bolts to 12 N.m (106 lb in).
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 662: Ignition Coil & Bracket Assembly (Right)
Courtesy of GENERAL MOTORS CORP.
7. Apply threadlock GM P/N 12345382 (Canadian P/N 10953489) or equivalent to the threads of the
bracket bolts.
8. Install the ignition coil and bracket assembly and bolts.
Tighten: Tighten the ignition coil and bracket assembly studs to 12 N.m (106 lb in).
ENGINE VALLEY COVER INSTALLATION
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 663: Knock Sensor Oil Seals & Valley Cover
Courtesy of GENERAL MOTORS CORP.
1. Install NEW knock sensor oil seals (520) into the valley cover (555).
Lubricate the seal surfaces with clean engine oil.
IMPORTANT: All gasket surfaces should be free of oil or other foreign material during
assembly.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст