Hummer H2. Manual — part 1782
Fig. 316: Valve Rocker Arm Pivot Support
Courtesy of GENERAL MOTORS CORP.
3. Remove the valve rocker arm pivot support.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 317: View Of Pushrods
Courtesy of GENERAL MOTORS CORP.
4. Remove the pushrods.
CYLINDER HEAD REMOVAL - LEFT
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Fig. 318: Cylinder Head & Bolts (Left)
Courtesy of GENERAL MOTORS CORP.
1. Remove the spark plugs from the cylinder head.
2. Remove the cylinder head bolts.
IMPORTANT: The cylinder head bolts can NOT be used again. Install NEW cylinder head
bolts during assembly.
NOTE:
After removal, place the cylinder head on two wood blocks to prevent
damage to the sealing surfaces.
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
3. Remove the cylinder head.
Fig. 319: Cylinder Head Gasket (Left)
Courtesy of GENERAL MOTORS CORP.
4. Remove the gasket.
5. Discard the gasket.
6. Discard the cylinder head bolts.
CYLINDER HEAD REMOVAL - RIGHT
2004 Hummer H2
2004 ENGINE Engine Mechanical - 4.8L, 5.3L, and 6.0L - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст