Hummer H2. Manual — part 2323
Fig. 323: Input Sun Gear Bearing Assembly & Input Housing
Courtesy of GENERAL MOTORS CORP.
4. Install the input sun gear bearing assembly (637) into the input housing.
FORWARD CLUTCH SPRAG DISASSEMBLE
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 324: Overrun Clutch Hub
Courtesy of GENERAL MOTORS CORP.
1. Remove the overrun clutch hub retaining snap ring (638).
2. Remove the overrun clutch hub (639).
3. Remove the forward sprag clutch inner race and input sun gear assembly (640).
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 325: Sprag Assembly Retainer Rings
Courtesy of GENERAL MOTORS CORP.
4. Remove the sprag assembly retainer rings (643).
5. Remove the forward sprag assembly from the forward clutch outer race (644).
FORWARD CLUTCH SPRAG ASSEMBLE
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 326: Inspecting Forward Sprag Assembly
Courtesy of GENERAL MOTORS CORP.
1. Inspect the forward sprag assembly (642) for the following conditions:
z
Wear or damage
z
Weak or broken springs
2. Inspect the forward clutch outer race (644) for the following conditions:
z
Race wear or damage
z
Spline wear
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст