Hummer H2. Manual — part 2324
z
Surface finish damage
3. Install the forward sprag assembly (642) into the forward clutch outer race (644).
Fig. 327: Sprag Assembly Retainer Rings
Courtesy of GENERAL MOTORS CORP.
4. Inspect the sprag assembly retainer rings (643) for wear or damage.
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
5. Install the sprag assembly retainer rings (643) into the forward clutch sprag assembly (644).
Fig. 328: Inspecting Forward Sprag Clutch Inner Race & Input Sun Gear Assembly
Courtesy of GENERAL MOTORS CORP.
6. Inspect the forward sprag clutch inner race and input sun gear assembly (640) for the following
conditions:
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
z
Damaged spline or gear teeth
z
Ring groove damage
z
Surface finish damage
z
Loose retainer
z
Wear
z
Cracks
7. Install the forward sprag clutch inner race and input sun gear assembly (640) into the forward sprag and
outer race assembly.
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Fig. 329: Overrun Clutch Hub
Courtesy of GENERAL MOTORS CORP.
8. Inspect the overrun clutch hub (639) for the following conditions:
z
Spline damage
z
Plugged lubrication holes
2004 Hummer H2
2004 TRANSMISSION Automatic Transmission - 4L60-E/4L65-E (Introduction) - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст