Hummer H2. Manual — part 507

SYMPTOMS - DOORS

1. Perform the Diagnostic System Check - Door Systems before using the Symptom Tables in order to

verify that all of the following are true:

z

There are no DTCs set.

z

The control module(s) can communicate via the serial data link.

2. Review the system operation in order to familiarize yourself with the system functions. Refer to the

following system descriptions:

z

Power Windows Description and Operation

z

Power Door Locks Description and Operation

z

Door Ajar Indicator Description and Operation

z

Outside Mirror Description and Operation (Power Mirrors) or Outside Mirror Description
and Operation (Heated Mirrors) or Outside Mirror Description and Operation (Auto Day -
Night Mirrors)

Visual/Physical Inspection

z

Inspect for aftermarket devices which could affect the operation of the power door lock, power window
and power mirror systems]. Refer to Checking Aftermarket Accessories in Wiring Systems.

z

Inspect the easily accessible or visible system components for obvious damage or conditions which could
cause the symptom.

Intermittent

Faulty electrical connections or wiring may be the cause of intermittent conditions. Refer to Testing for
Intermittent Conditions and Poor Connections in Wiring Systems.

Symptom List

Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:

z

Power Windows Inoperative - Express Down Function

z

Power Windows Inoperative - Lockout Function

z

Power Window Inoperative - Driver Door

z

Power Window Inoperative - Passenger Door (Front Door) or Power Window Inoperative -
Passenger Door (Rear Door(s))

z

Door Ajar Indicator Malfunction

supporting text.

Does the DTC reset?

Go to Step 2

System OK

IMPORTANT: The following steps must be completed before using the symptom tables.

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2

z

Power Door Locks Inoperative (Front Door(s)) or Power Door Locks Inoperative (Rear Door(s))

z

Power Door Locks Inoperative - Endgate/Liftgate

z

Power Mirrors Inoperative

z

Power Mirrors - Folding Inoperative

z

Power Mirrors - Memory Functions Inoperative

z

Mirrors - Outside Automatic Day-Night Feature Inoperative

z

Heated Mirrors Inoperative

POWER WINDOWS INOPERATIVE - EXPRESS DOWN FUNCTION

Power Windows Inoperative - Express Down Function

Step

Action

Yes

No

Schematic Reference: Power Window Schematics
Connector End View Reference:Power Door Systems Connector End Views

1

Did you perform the Door Systems Diagnostic
System Check?

Go to Step 2

Go to Diagnostic

System Check -

Door Systems

2

Activate the power window switch to the express
down position and release the power window
switch.
Does the power window continue to travel
downward after the power window switch is
released?

Go to Testing for

Intermittent Conditions

and Poor Connections in

Wiring Systems

Go to Step 3

3

1. Install a scan tool.

2. Monitor the appropriate window status data

parameter in the driver door input list.

3. Activate the appropriate power window

switch to the express down position.

Does the window status data parameter change to
Express Down?

Go to Step 4

Go to Step 6

4

Is the express down function inoperative on the
passenger front power window?

Go to Step 5

Go to Step 6

5

Inspect for poor connections at the passenger door
module. Refer to Testing for Intermittent
Conditions and Poor Connections and
Connector Repairs in Wiring Systems.
Did you find and correct the condition?

Go to Step 9

Go to Step 7

6

Inspect for poor connections at the driver door
module. Refer to Testing for Intermittent
Conditions and Poor Connections and
Connector Repairs in Wiring Systems.
Did you find and correct the condition?

Go to Step 9

Go to Step 8

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2

POWER WINDOWS INOPERATIVE - LOCKOUT FUNCTION

Power Windows Inoperative - Lockout Function

7

Replace the passenger door module. Refer to
Switch Replacement - Door Lock and Side
Window - Passenger .Did you complete the
repair?

IMPORTANT:

Perform the set up procedure for the
passenger door module. Refer to Service
Programming System (SPS) in Programming.

Go to Step 9

-

8

Replace the driver door module. Refer to Switch
Replacement - Door Lock and Side Window -
Driver .Did you complete the repair?

IMPORTANT:

Perform the set up procedure for the driver
door module. Refer to Service Programming
System (SPS) in Programming.

Go to Step 9

-

9

Operate the system in order to verify the repair.
Did you correct the condition?

System OK

Go to Step 3

Step

Action

Yes

No

Schematic Reference: Power Window Schematics
Connector End View Reference: Power Door Systems Connector End Views

1

Did you perform the Door Systems Diagnostic
System Check?

Go to

Step 2

Go to Diagnostic System Check -

Door Systems

2

1. Disable the window lockout function.

2. Operate the passenger power windows from

the passenger door power window switches.

Do the passenger power windows operate
normally?

Go to

Step 3

Go to Power Window Inoperative -

Passenger Door (Front Door) or

Power Window Inoperative -

Passenger Door (Rear Door(s))

3

1. Enable the window lockout function.

2. Operate the passenger power windows from

the passenger door power window switches.

Do the passenger power windows operate up and
down?

Go to

Step 4

Go to Testing for Intermittent

Conditions and Poor Connections

in Wiring Systems

1. Install a scan tool.

2. Monitor the window lockout data parameter

in the driver door module input list.

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2

4

3. Place the window lockout switch in both the

ON and OFF positions.

Does the window lockout data parameter change
accordingly?

Go to

Step 5

Go to Step 10

5

Does the window lockout function for the front
passenger power window operate properly?

Go to

Step 6

Go to Step 9

6

1. Disable the window lockout function.

2. Disconnect the appropriate rear window

switch.

3. Connect a test lamp to a good ground.

4. Probe the rear window lockout signal circuit

at the rear window switch harness connector.

Does the test lamp illuminate?

Go to

Step 7

Go to Step 11

7

Test for a short to battery positive voltage on the
rear window lockout signal circuit. Refer to Circuit
Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?

Go to

Step 16

Go to Step 8

8

Inspect for poor connections at the body control
module. Refer to Testing for Intermittent
Conditions and Poor Connections and
Connector Repairs in Wiring Systems.
Did you find and correct the condition?

Go to

Step 16

Go to Step 12

9

Inspect for poor connections at the passenger door
module. Refer to Testing for Intermittent
Conditions and Poor Connections and
Connector Repairs in Wiring Systems.
Did you find and correct the condition?

Go to

Step 16

Go to Step 13

10

Inspect for poor connections at the driver door
module. Refer to Testing for Intermittent
Conditions and Poor Connections and
Connector Repairs in Wiring Systems.
Did you find and correct the condition?

Go to

Step 16

Go to Step 14

11

Inspect for poor connections at the rear power
window switch. Refer to Testing for Intermittent
Conditions and Poor Connections and
Connector Repairs in Wiring Systems.
Did you find and correct the condition?

Go to

Step 16

Go to Step 15

12

IMPORTANT:

Perform the set up procedure for the body
control module. Refer to Body Control Module
(BCM) Programming/RPO Configuration in Body
Control System.

2004 Hummer H2

2004 ACCESSORIES & EQUIPMENT Doors - Hummer H2