Hummer H2. Manual — part 1209
Fig. 54: Battery Ground Negative Cable & Bolt
Courtesy of GENERAL MOTORS CORP.
13. Connect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure
(Single Battery) .
GENERATOR BRACKET REPLACEMENT
Removal Procedure
2004 Hummer H2
2004 ELECTRICAL Engine Electrical - Hummer H2
Fig. 55: Battery Cable Junction Block Bracket Bolts
Courtesy of GENERAL MOTORS CORP.
1. Remove the battery cable junction block bracket bolts.
2004 Hummer H2
2004 ELECTRICAL Engine Electrical - Hummer H2
Fig. 56: Generator Bracket
Courtesy of GENERAL MOTORS CORP.
2. Remove the generator. Refer to Generator Replacement .
3. Remove the power steering pump. Refer to Power Steering Pump Replacement in Power Steering
System.
4. Remove the generator bracket bolts.
5. Remove the generator bracket.
Installation Procedure
2004 Hummer H2
2004 ELECTRICAL Engine Electrical - Hummer H2
Fig. 57: Generator Bracket
Courtesy of GENERAL MOTORS CORP.
1. Install the generator bracket.
2. Install the generator bracket bolts.
Tighten: Tighten the bolts to 50 N.m (37 lb ft).
3. Install the power steering pump. Refer to Power Steering Pump Replacement in Power Steering
System.
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ELECTRICAL Engine Electrical - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст