Hummer H2. Manual — part 2548
Fig. 164: Locating Overrun Clutch Spring Retainer Snap Ring
Courtesy of GENERAL MOTORS CORP.
18. Install the J 23327-1 and the J 25018-A , and compress the overrun clutch spring assembly using J
23456 .
19. Install the overrun clutch spring retainer snap ring (635).
20. Remove the J 23327-1 and the J 25018-A .
INPUT HOUSING TO OUTPUT SHAFT SEAL INSTALLATION
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Fig. 165: View Of Input Housing To Output Shaft Seal
Courtesy of GENERAL MOTORS CORP.
Install a new input housing to output shaft seal (636).
OVERRUN CLUTCH INSTALLATION
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Fig. 166: Identifying Overrun Clutch Plates
Courtesy of GENERAL MOTORS CORP.
1. Inspect the fiber plate assemblies (645B) and the steel plates (645A) for the following defects:
z
Damaged tangs
z
Delamination
z
Excessive wear
z
Wear or heat damage
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Fig. 167: Aligning Overrun Clutch Plates
Courtesy of GENERAL MOTORS CORP.
2. Install the overrun clutch plates into the input housing starting with a steel plate (645B) and alternating
with fiber plate assemblies (645A).
3. Index the plates in the input housing with the wide notches remaining open.
2004 Hummer H2
2004 TRANSMISSION/TRANSAXLE Automatic Transmission - Overhaul - 4L60-E/4L65-E
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст