Hummer H2. Manual — part 382
Fig. 34: I/P Compartment Striker Assembly
Courtesy of GENERAL MOTORS CORP.
1. Install striker bracket to instrument panel subscript loosely.
2. Align striker with I/P compartment door and tighten striker bracket in place.
Tighten: Tighten the screws to 1.6 N.m (14 lb in).
DOOR REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT
Removal Procedure
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
Fig. 35: I/P Compartment Door
Courtesy of GENERAL MOTORS CORP.
1. Remove screws from hinge assembly that holds the compartment door to the I/P.
2. Remove door compartment.
Installation Procedure
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
Fig. 36: I/P Compartment Door Hinge
Courtesy of GENERAL MOTORS CORP.
1. Align door compartment hinge to I/P.
Tighten: Tighten the screws to 1.6 N.m (14 lb in).
2. Fasten compartment hinge to IP.
HANDLE REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT
Removal Procedure
NOTE:
Refer to Fastener Notice in Cautions and Notices.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
Fig. 37: I/P Compartment Door
Courtesy of GENERAL MOTORS CORP.
1. Remove compartment door from instrument panel subscript. Refer to Door Replacement - Instrument
Panel (I/P) Compartment .
2. Place the compartment door on a work bench.
2004 Hummer H2
2004 ACCESSORIES & EQUIPMENT Instrument Panel, Gauges, and Console - Hummer H2
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст