Toyota Highlander (2018 year). Manual — part 107

440

6-1. Using the air conditioning system and defogger

Fogging up of the windows

The windows will easily fog up when the humidity in the vehicle is high.

Turning

on will dehumidify the air from the outlets and defog the wind-

shield effectively.

If you turn

off, the windows may fog up more easily.

The windows may fog up if the recirculated air mode is used.

Outside/recirculated air mode

When driving on dusty roads such as tunnels or in heavy traffic, set the out-
side/recirculated air mode button to the recirculated air mode. This is effec-
tive in preventing outside air from entering the vehicle interior. During
cooling operation, setting the recirculated air mode will also cool the vehicle
interior effectively.

Outside/recirculated air mode may automatically switch depending on the
temperature setting or the inside temperature.

When the outside temperature exceeds 75°F (24°C) and the air condition-
ing system is on

In order to reduce the air conditioning power consumption, the air condition-
ing system may switch to recirculated air mode automatically. This may also
reduce fuel consumption.

Recirculated air mode is selected as a default mode when the engine switch
is turned to “ON” position.

It is possible to switch to outside air mode at any time by pressing

.

Ventilation and air conditioning odors

To let fresh air in, set the air conditioning system to the outside air mode.

During use, various odors from inside and outside the vehicle may enter into
and accumulate in the air conditioning system. This may then cause odor to
be emitted from the vents.

To reduce potential odors from occurring:
It is recommended that the air conditioning system be set to outside air
mode prior to turning the vehicle off.

Air conditioning filter
→P. 547

441

6-1. Using the air conditioning system and defogger

6

In

te

rior fe

atures

WARNING

To prevent the windshield from fogging up

Do not use

during cool air operation in extremely humid weather.

The difference between the temperature of the outside air and that of the
windshield can cause the outer surface of the windshield to fog up, block-
ing your vision.

To prevent burns

Do not touch the rear view mirror surfaces when the outside rear view mir-
ror defoggers are on.

Do not touch the glass at lower part of the windshield or to the side of the
front pillars when the windshield wiper de-icer is on.

NOTICE

To prevent battery discharge
Do not leave the air conditioning system on longer than necessary when the
engine is stopped.

Do not place anything on the instrument
panel which may cover the air outlets.
Otherwise, air flow may be obstructed,
preventing the windshield defoggers
from defogging.

442

6-1. Using the air conditioning system and defogger

Adjusting the temperature setting

To adjust the temperature setting, turn

clockwise to increase

the temperature and counterclockwise to decrease the tempera-
ture.

The temperature for the driver, front passenger and rear seats can be
adjusted separately when:

is pressed. (The “SYNC” displays disappear.)

• The front passenger side

dial is turned. (The “PASS SYNC”

display changes to “PASS”.)

• The “

∧” or “∨” side of

is pressed. (The “REAR SYNC” display

changes to “REAR”.)

The air conditioning system switches between individual and synchro-
nized modes each time

is pressed.

Front automatic air conditioning system

: If equipped

Air outlets and fan speed are automatically adjusted according
to the temperature setting.

Air conditioning controls

443

6-1. Using the air conditioning system and defogger

6

In

te

rior fe

atures

Fan speed setting

To adjust the fan speed, press

∧”

on

to increase the fan

speed and “

” to decrease the fan speed.

Press

to turn the fan off.

Changing airflow modes

To change the airflow mode,

press .

The air outlets used are
switched each time the button is
pressed.

Air flows to the upper body.

Air flows to the upper body
and feet.

Air flows to the feet.

Air flows to the feet and the
windshield defogger oper-
ates.

Press .

Adjust the temperature setting.

To stop the operation, press

.

Automatic mode indicator

If the fan speed setting or air flow modes are operated, the auto-
matic mode indicator goes off. However, automatic mode for func-
tions other than that operated is maintained.

Switching between outside air and recirculated air modes

Press .

The mode switches between outside air mode (indicator off) and recir-

culated air mode (indicator on) each time

is pressed.

1
2

3
4

Using automatic mode

Other functions

1
2
3

Была ли эта страница вам полезна?
Да!Нет
7 посетителей считают эту страницу полезной.
Большое спасибо!
Ваше мнение очень важно для нас.

Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.

Текст

Политика конфиденциальности