Toyota Proace EV (2022 year). Manual in english — page 11
210
► Connect the charging cable from the control
Accelerated charging, mode 3
The start of charging is confirmed by the flashing
unit to the domestic socket.
green charging indicator lamp in the flap.
When the connection is made, all of the indicator
If this is not the case, charging has not started;
lamps on the control unit light up, then only the
restart the procedure, ensuring that the
POWER indicator lamp remains on in green.
connection is properly established.
► Remove the protective cover from the
The red indicator lamp in the flap comes on to
charging nozzle.
indicate that the nozzle is locked.
► Insert the nozzle into the charging connector.
The start of charging is confirmed by the flashing
► Follow the accelerated charging unit
Deferred charging
green CHARGE indicator lamps in the flap, then
(Wallbox) user instructions.
Settings
those on the control unit.
► Remove the protective cover from the
At any authorized Toyota retailer or Toyota
If this is not the case, charging has not
charging nozzle.
authorized repairer, or any reliable repairer,
started; restart the procedure, ensuring that all
► Insert the nozzle into the charging connector.
with Bluetooth® audio system
connections are properly established.
The start of charging is confirmed when the
By default, the deferred charging start time is set
The red indicator lamp in the flap comes on to
charging indicator lamp in the flap flashes green.
to midnight (vehicle time).
indicate that the nozzle is locked.
If this is not the case, charging has not started;
You can have the deferred charging start time
restart the procedure, ensuring that the
modified.
NOTICE
connection has been properly established.
Go to any authorized Toyota retailer or Toyota
The red indicator lamp in the flap comes on to
When charging is complete and while the
authorized repairer, or any reliable repairer.
indicate that the nozzle is locked.
charging cable is still connected, opening the
On a smartphone or tablet (GSM), with
Superfast charging, mode 4
driver's door will display the charge level on
TOYOTA Pro Touch or TOYOTA Pro Touch
the instrument panel for about 20 seconds.
with navigation system
You can programme the deferred
charging function at any time via the
MyToyota application (Available soon).
For more information on Remote functions,
refer to the corresponding section.
In the vehicle, with TOYOTA Pro Touch with
► Depending on version, remove the protective
navigation system
cover from the lower part of the connector.
► In the Energy touch screen menu,
► Follow the instructions for use of the fast
select the Charge page.
public charger and connect the cable from the
► Set the charging start time.
fast public charger to the vehicle's connector.
211
► Press OK.
► If the vehicle is unlocked, lock it and then
the green charging indicator lamp in the flap
The setting is saved in the system.
unlock it.
come on fixed.
Activation
► If the vehicle is locked, unlock it.
► Replace the protective cover on the charging
The red indicator lamp in the flap goes out to
nozzle and close the charging flap.
confirm that the charging nozzle is unlocked.
► Disconnect the control unit end of the
NOTICE
► In modes 2 and 3, remove the charging
charging cable from the domestic socket.
7
Deferred charging is only possible with
nozzle within 30 seconds.
Accelerated charging , mode 3
modes 2 and 3.
The end of charging is indicated by the charging
NOTICE
control unit and by the fixed lighting of the green
► After programming the deferred charging,
The locking of the nozzle is linked to the
indicator lamp in the flap.
connect your vehicle to the desired charging
locking of the loading area. For more
► Hang up the nozzle on the charging unit and
equipment.
information on Total or selective unlocking,
close the charging flap.
refer to the corresponding section.
Superfast charging, mode 4
The end of charging is indicated by the charger
The charging indicator lamp comes on in white.
and by the fixed lighting of the green indicator
NOTICE
lamp in the flap.
► You can also pause charging by
With selective door unlocking activated, press
pressing this button in the flap (in mode 4
the unlocking button twice to disconnect the
only).
► Press this button in the flap within one
charging nozzle.
► Hang up the nozzle on the charger.
minute to activate the system (confirmed by the
► Depending on version, replace the protective
charging indicator lamp coming on in blue).
cover on the lower section and close the
NOTICE
charging flap.
Disconnection
When charging is complete, the green
NOTICE
charging indicator lamp in the flap goes out
after about 2 minutes.
When the charging nozzle is disconnected, a
message on the instrument panel indicates
Domestic charging, mode 2
that charging is complete, even if the charging
Before disconnecting the nozzle from the
The end of charging is confirmed when the green
nozzle was disconnected before full charging
charging connector:
CHARGE indicator lamp on the control unit and
was completed.
212
Energy economy mode
Exiting the mode
Snow chains
These functions will be automatically reactivated
System which manages the duration of use of
In wintry conditions, snow chains improve
the next time the vehicle is used.
certain functions to conserve a sufficient level of
traction as well as the behaviour of the vehicle
In order to restore the use of these functions
charge in the battery.
when braking.
immediately, start the engine and let it run:
After switching off the engine and for a maximum
cumulative period of around 40 minutes, you can
- for less than 10 minutes, to use the equipment
WARNING
for approximately 5 minutes,
continue to use functions such as the audio and
- for more than 10 minutes, to use the
The snow chains must be fitted only to the
telematics system, the wipers, the dipped beam
equipment for approximately 30 minutes.
front wheels. They must never be fitted to
headlamps, the courtesy lamps, etc.
Let the engine run for the duration specified to
"space-saver" type spare wheels.
Switching to the mode
ensure that the battery charge is sufficient.
Do not repeatedly and continuously restart the
A message indicating that the vehicle has
NOTICE
engine in order to charge the battery.
switched to economy mode is displayed on the
instrument panel screen and the active functions
Take account of the legislation specific to
WARNING
are put on standby.
each country on the use of snow chains and
A flat battery prevents the engine from
the maximum authorised speed.
NOTICE
starting.
Only use chains that have been designed for the
For more information on the 12 V battery,
If a telephone call is in progress at the time, it
type of wheel fitted to your vehicle.
refer to the corresponding section.
will be maintained for around 10 minutes
Original tyre size
Type of chain
using your audio system’s hands-free system.
215/65 R16
12 mm link
Load reduction mode
215/60 R17
System that manages the use of certain
225/55 R17
functions according to the level of charge
remaining in the battery.
You can also use snow socks.
When the vehicle is being driven, the load
For more information, contact a any authorized
reduction function temporarily deactivates certain
Toyota retailer or Toyota authorized repairer, or
functions, such as the air conditioning and the
any reliable repairer..
heated rear screen.
The deactivated functions are reactivated
automatically as soon as conditions permit.
213
Installation tips
Towing device
WARNING
► If you have to fit the chains during a journey,
Load distribution
stop the vehicle on a flat surface on the side of
Observe the maximum authorised towable
► Distribute the load in the trailer so that the
the road.
weight, indicated on your vehicle's registration
heaviest items are as close as possible to
► Apply the parking brake and position any
certificate, the manufacturer's label as well as
the axle and the nose weight approaches the
wheel chocks under the wheels to prevent
in the Technical data section of this guide.
maximum permitted without exceeding it.
7
movement of your vehicle.
Complying with the maximum authorised
Air density decreases with altitude, thus reducing
► Fit the chains following the instructions
nose weight (towball) also includes the
engine performance. The maximum towed load
provided by the manufacturer.
use of accessories (bicycle carriers, tow
must be reduced by 10 % for every 1,000 metres
► Move off gently and drive for a few moments,
boxes, etc.).
(3,280 ft) of altitude.
without exceeding 50 km/h (31 mph).
► Stop your vehicle and check that the snow
NOTICE
WARNING
chains are correctly tightened.
Use towing devices and their unmodified
Observe the legislation in force in the country
NOTICE
harnesses approved by TOYOTA. It is
in which you are driving.
recommended that the installation be
It is strongly recommended that before you
performed by any authorized Toyota retailer
leave, you practise fitting the snow chains on
or Toyota authorized repairer, or any reliable
NOTICE
a level and dry surface.
repairer.
If the towing device is not fitted by any
Electric motor
authorized Toyota retailer or Toyota
An electric vehicle may be fitted with a towing
WARNING
authorized repairer, or any reliable repairer,
device.
it must still be fitted in accordance with the
It is therefore possible to tow a trailer or
Avoid driving with snow chains on roads that
vehicle manufacturer's instructions.
caravan.
have been cleared of snow to avoid damaging
Certain driving assistance or manoeuvring
Contact any authorized Toyota retailer or
your vehicle's tyres and the road surface. If
assistance functions are automatically
Toyota authorized repairer, or any reliable
your vehicle is fitted with alloy wheels, check
disabled if an approved towbar is used.
repairer for more information and to obtain a
that no part of the chain or its fixings is in
suitable towing device.
contact with the wheel rim.
214
Roof bars / Roof rack
WARNING
As this value may change, please verify the
WARNING
maximum load quoted in the guide supplied
With panoramic sunroof
As a safety measure and to avoid damaging
with the roof bars.
the roof, it is essential to use the roof bars
If the height exceeds 40 cm, adapt the speed
and racks approved for your vehicle.
of the vehicle to the profile of the road to
Observe the instructions on fitting and use
avoid damaging the roof bars and the fixings
contained in the guide supplied with the roof
on the vehicle.
bars and racks.
Be sure to refer to national legislation in order
to comply with the regulations for transporting
objects that are longer than the vehicle.
WARNING
Roof bars
Recommendations
A maximum of 3 roof bars (or 2 bars for the
Distribute the load uniformly, taking care to
version with panoramic sunroof) can be installed
avoid overloading one of the sides.
- use the positions marked in colour.
Arrange the heaviest part of the load as close
NOTICE
as possible to the roof.
Secure the load firmly.
Max. authorised load weight:
Drive gently: the vehicle will be more
- over 2 roof bars: 100 kg,
susceptible to the effects of side winds and its
- distributed over 3 roof bars: 150 kg.
stability may be affected.
To install the transverse roof bars, use the fixing
Remove the roof bars once they are no longer
points provided for this purpose:
needed.
► Open the fixing covers on each bar.
► Put each fixing point in place and lock them
to the roof one by one.
► Ensure that the roof bars are correctly fitted
(by shaking them).
► Close the fixing covers on each bar.
The bars can be interchanged and are adaptable
to each pair of fixing points.
215
Roof racks
Bonnet
NOTICE
NOTICE
The location of the interior bonnet release
WARNING
lever prevents opening the bonnet when the
Max. authorised load weight:
Stop & Start
left-hand front door is closed.
- Compact: 140 kg,
Before doing anything under the bonnet, you
7
- Medium and Long: 170 kg.
must switch off the ignition to avoid any risk of
WARNING
To fit a roof rack, use the fixing points provided
injury resulting from an automatic change to
for this purpose:
START mode.
When the engine is hot, handle the exterior
► Place the roof rack on the roof aligned with
safety catch and the bonnet stay with care
the fixing points and secure each one to the roof
(risk of burns), using the protected area.
in turn.
When the bonnet is open, take care not to
► Ensure that the roof rack is correctly fitted (by
damage the safety catch.
shaking it).
Do not open the bonnet under very windy
WARNING
conditions.
Electric motor
WARNING
Take care with objects or clothing that could
be caught in the blades of the cooling fan
Cooling of the engine when stopped
or in certain moving components - risk of
The engine cooling fan may start after the
strangulation and serious injury!
engine has been switched off.
Before carrying out any work under the
Take care with objects or clothing that
bonnet, you must switch off the ignition, check
could be caught in the blades of the fan!
that the READY indicator lamp is off on the
instrument panel and disconnect the charging
nozzle if it is plugged in.
216
Opening
Closing
Diesel engine
► Open the door.
► Hold the bonnet and pull out the stay from the
support slot.
► Clip the stay in its housing.
► Lower the bonnet and release it near the end
of its travel.
► Pull on the bonnet to check that it is locked
correctly.
WARNING
1.
Screenwash fluid reservoir
2.
Engine coolant reservoir
► Pull the release lever 1, located at the bottom
Because of the presence of electrical
3.
Brake fluid reservoir
of the door frame, towards you.
equipment under the bonnet, it is
4.
Battery
► Tilt the safety catch 2 upwards, then raise the
recommended that exposure to water (rain,
5.
Remote earth point (-)
bonnet.
washing, etc.) be limited.
6.
Fusebox
► Unclip the stay 3 from its housing and place it
7.
Air filter
in the support slot to hold the bonnet open.
8.
Engine oil filler cap
Engine compartment
9.
Engine oil dipstick
The engine shown here is an example for
10.
Priming pump*
illustrative purposes only.
11.
Power steering fluid reservoir
The locations of the following components may
vary:
WARNING
- Air filter.
- Engine oil dipstick.
Diesel fuel system
- Engine oil filler cap.
This system is under very high pressure.
- Priming pump.
All work must be carried out only by
any authorized Toyota retailer or Toyota
authorized repairer, or any reliable repairer.
* Depending on engine.
217
Electric motor
Checking levels
Used products
Check all of the following levels regularly in
WARNING
accordance with the manufacturer's service
schedule. Top them up if required, unless
Avoid prolonged contact of used oil or fluids
otherwise indicated.
with the skin.
If a level drops significantly, have the
7
Most of these fluids are harmful to health and
corresponding system checked by any
very corrosive.
authorized Toyota retailer or Toyota authorized
1.
Screenwash fluid reservoir
repairer, or any reliable repairer.
2.
Engine coolant reservoir (level only)
ECO
3.
Brake fluid reservoir
WARNING
4.
Battery/Fuses
Do not discard used oil or fluids into sewers
5.
Remote earth point (-)
The fluids must comply with the
or onto the ground.
6.
Fusebox
manufacturer's requirements and with the
Empty used oil into the containers reserved
7.
400 V electrical circuit
vehicle's engine.
for this purpose at any authorized Toyota
8.
Emergency circuit-breaker for emergency
retailer or Toyota authorized repairer, or any
services and maintenance technicians
reliable repairer.
WARNING
9.
Power steering fluid reservoir
Take care when working under the bonnet, as
For more information on the Charging system
Engine oil
certain areas of the engine may be extremely
(Electric), refer to the corresponding section.
The level is checked, with the engine
hot (risk of burns) and the cooling fan could
having been switched off for at least 30
start at any time (even with the ignition off).
minutes and on level ground, either using the oil
level indicator in the instrument panel when the
ignition is switched on (for vehicles equipped
with an electric gauge), or using the dipstick.
It is normal to top up the oil level between two
services (or oil changes). It is recommended
that you check the level, and top up if necessary,
every 5,000 km (3,000 miles).
218
Brake fluid
WARNING
WARNING
The level of this fluid should be close to
In order to maintain the reliability of the
Oil grade
the "MAX" mark. If not, check the brake
engine and emissions control system, never
Before topping up or changing the engine oil,
pad wear.
use additives in the engine oil.
check that the oil is suitable for your engine
To know how often the brake fluid should be
and complies with the recommendations in
replaced, refer to the manufacturer's servicing
the service schedule supplied with the vehicle
schedule.
Checking using the dipstick
(or available from your authorized Toyota
For the location of the dipstick, please refer
retailer or Toyota authorized repairer, or any
WARNING
to the illustration of the corresponding engine
reliable repairer).
compartment.
If topping up, clean the cap before replacing
Use of non-recommended oil may invalidate
► Grasp the dipstick by its coloured grip and
it. Use only DOT4 brake fluid from a sealed
your warranty in the event of engine failure.
pull it out completely.
canister.
► Wipe the end of the dipstick using a clean,
lint-free cloth.
Topping up the engine oil level
Power steering fluid
For the location of the engine oil filler cap, please
refer to the corresponding engine compartment
The level of this fluid should be close to
illustration.
the "MAX" mark. Check it, with the vehicle
► Add oil in small quantities, avoiding any spills
parked on level ground and with the engine cold,
on engine components (risk of fire).
by reading the level on the filler neck.
► Wait a few minutes before checking the level
again using the dipstick.
Engine coolant
► Reinsert the dipstick and push fully down,
► Top up the level if necessary.
(Diesel)
then pull it out again to visually check the oil
► After checking the level, carefully screw the
level: the correct level is between marks A (max)
It is normal to top up this fluid between
oil filler cap back on and replace the dipstick in
and B (min).
two services.
its tube.
Do not start the engine if the level is:
The check and top-up must only be done with
- above mark A: contact any authorized Toyota
the engine cold.
NOTICE
retailer or Toyota authorized repairer, or any
A level of coolant that is too low risks causing
reliable repairer.
The oil level indication displayed on the
major damage to the engine; the coolant level
- below mark B: top up the engine oil
instrument panel when the ignition is switched
must be close to the "MAX" mark without ever
immediately.
on is not valid for 30 minutes following an
going above it.
addition of oil.
219
If the level is close to or below the "MIN" mark, it
Screenwash fluid
Go to any authorized Toyota retailer or Toyota
is essential to top it up.
authorized repairer, or any reliable repairer.
Top up to the required level when
When the engine is hot, the temperature of the
necessary.
coolant is regulated by the fan.
AdBlue (Diesel engines)
As the cooling system is pressurised, wait at
Fluid specification
An alert is triggered when the reserve level is
least one hour after switching off the engine
reached.
The fluid must be topped up with a ready-to-use
7
before carrying out any work.
For more information on the Indicators and in
mixture.
In order to avoid the risk of scalding if you need
particular the AdBlue range indicators, refer to
In winter (temperatures below zero), a liquid
to top up in an emergency, wrap a cloth around
the corresponding section.
containing an agent to prevent freezing must
the cap and unscrew the cap by two turns to
To avoid the vehicle being immobilised in
be used which is appropriate for the prevailing
allow the pressure to drop.
accordance with regulations, you must top up the
conditions, in order to protect the elements of the
Once the pressure has dropped, remove the cap
AdBlue tank.
system (pump, tank, ducts, jets, etc.).
and top up to the required level.
For more information on AdBlue, and in
(Electric)
WARNING
particular the supply of AdBlue, refer to the
corresponding section.
Filling with pure water is prohibited under all
WARNING
circumstances (risk of freezing, limestone
Checks
Do not top up the coolant.
deposits, etc.).
Unless otherwise indicated, check these
components in accordance with the
Diesel fuel additive (Diesel
manufacturer's service schedule and according
with particle filter)
to your engine.
Otherwise, have them checked by any
or
On reaching the minimum level
authorized Toyota retailer or Toyota authorized
in the particle filter additive
If the level is close to or below
repairer, or any reliable repairer.
tank, this warning lamp comes on fixed,
the "MIN" mark, it is essential to contact
accompanied by an audible warning and a
any authorized Toyota retailer or Toyota
message warning that the additive level is too
authorized repairer, or any reliable repairer.
low.
Topping up
The topping up of this additive must be carried
out quickly.
220
Oil filter
WARNING
WARNING
Change the oil filter each time the engine
Only use products recommended by TOYOTA
Versions equipped with Stop & Start are fitted
oil is changed.
or products of equivalent quality and
with a 12 V lead-acid battery of specific
specification.
technology and specification.
Particle filter (Diesel)
In order to optimise the operation of
Its replacement should be carried out only
The start of clogging of the particle
components as important as those in the
by any authorized Toyota retailer or Toyota
filter is indicated by the temporary
braking system, TOYOTA selects and offers
authorized repairer, or any reliable repairer.
lighting of this warning lamp, accompanied by an
very specific products.
alert message.
As soon as the traffic conditions permit,
Passenger compartment
regenerate the filter by driving at a speed of at
12 V battery
filter
least 60 km/h (37 mph) until the warning lamp
The battery does not require any
Depending on the environment and the
goes off.
maintenance.
use of the vehicle (e.g. dusty atmosphere,
However, check regularly that the terminals
city driving), change it twice as often, if
NOTICE
are correctly tightened (versions without quick
necessary.
release terminals) and that the connections are
If the warning lamp stays on, this indicates a
clean.
low Diesel additive level.
NOTICE
For more information on Checking levels,
NOTICE
A clogged passenger compartment filter can
refer to the corresponding section.
adversely affect air conditioning system
For more information on the precautions to
performance and generate undesirable
take before any work on the 12 V battery,
NOTICE
odours.
refer to the corresponding section.
Following prolonged operation of the vehicle
Air filter
at very low speed or at idle, you may, in
exceptional circumstances, notice the
Depending on the environment and the
emission of water vapour at the exhaust while
use of the vehicle (e.g. dusty atmosphere,
accelerating. This has no impact on the
city driving), change it twice as often, if
vehicle’s behaviour or the environment.
necessary.
221
problem, do not hesitate to have the system
Wheels and tyres
NOTICE
checked by a TOYOTA dealer or a qualified
The inflation pressure of all tyres,
workshop.
New vehicle
including the spare wheel, must be
During the first few particle filter regeneration
checked on "cold” tyres.
NOTICE
operations, you may notice a "burning" smell.
The pressures indicated on the tyre pressure
This is perfectly normal.
label are valid for "cold" tyres. If you have driven
For more information on the Electric parking
7
for more than 10 minutes or more than 10 km
brake, refer to the corresponding section.
(6 miles) at over 50 km/h (31 mph), add 0.3 bar
Manual gearbox
(30 kPa) to the values indicated on the label.
The gearbox does not require any
Brake pads
maintenance (no oil change).
WARNING
Brake wear depends on the style of
driving, particularly in the case of vehicles
Automatic gearbox
Under-inflation increases fuel consumption.
used in town, over short distances. It may be
The gearbox does not require any
Non-compliant tyre pressure causes
necessary to have the condition of the brakes
maintenance (no oil change).
premature wear on tyres and has an adverse
checked, even between vehicle services.
effect on the vehicle's road holding - risk of an
Unless there is a leak in the circuit, a drop in the
Drive selector (Electric)
accident!
brake fluid level indicates that the brake pads
The drive selector does not require any
are worn.
Driving with worn or damaged tyres reduces the
maintenance.
braking and road holding performance of the
NOTICE
vehicle. It is recommended to regularly check the
Manual parking brake
condition of the tyres (tread and sidewalls) and
If you notice excessive brake lever travel
After washing the vehicle, moisture, or in
wheel rims as well as the presence of the valves.
or decreased effectiveness, the parking
wintry conditions, ice can form on the brake
When the wear indicators no longer appear set
brake must be adjusted, even between two
discs and pads: braking efficiency may be
back from the tread, the depth of the grooves is
services.
reduced. Gently dab the brakes to dry and
less than 1.6 mm; it is imperative to replace the
This system must be checked by any authorized
defrost them.
tyres.
Toyota retailer or Toyota authorized repairer, or
Using different size wheels and tyres from those
any reliable repairer.
Brake disc/drum wear
specified can affect the lifetime of tyres, wheel
rotation, ground clearance, the speedometer
Electric parking brake
For any information on checking brake
reading and have an adverse effect on road
disc/drum wear, contact any authorized
This system does not require any routine
holding.
Toyota retailer or Toyota authorized repairer, or
servicing. However, in the event of a
any reliable repairer.
222
Fitting different tyres on the front and rear axles
AdBlue® (Diesel engines)
NOTICE
can cause the VSC to mistime.
To respect the environment and ensure
Always mark the direction of rotation on the tyres
For more information on the Warning and
compliance with the Euro 6 standard, without
that will be stored when fitting winter or summer
indicator lamps and the associated alerts, or
adversely affecting the performance or fuel
tyres. Store them in a cool, dry place and away
the Indicators, please refer to the
consumption of its Diesel engines, TOYOTA has
from direct exposure to the sun's rays.
corresponding sections.
taken the decision to equip its vehicles with a
Winter or 4-seasons tyres can be
system that associates SCR (Selective Catalytic
identified by this symbol on their
sidewalls.
Reduction) with a Diesel particle filter (DPF) for
WARNING
the treatment of exhaust gases.
Shock absorbers
Once the AdBlue® tank is empty, a device
SCR system
required by law prevents the engine from
It is not easy for drivers to detect when
Using a liquid called AdBlue® that contains
being restarted.
shock absorbers are worn. Nevertheless,
urea, a catalytic converter turns up to 85% of
If the SCR system is faulty, the level of
the shock absorbers have a major impact on
the nitrogen oxides (NOx) into nitrogen and
emissions from the vehicle will no longer meet
road holding and braking performance.
water, which are harmless to health and the
the Euro 6 standard and the vehicle starts
For your safety and driving comfort, it is
environment.
polluting the environment.
important to have them regularly checked by any
The AdBlue® is contained in a special
In the event of a confirmed SCR system
authorized Toyota retailer or Toyota authorized
tank holding about 20 litres.
malfunction, it is essential to visit any
repairer, or any reliable repairer.
Its capacity allows a driving range of
authorized Toyota retailer or Toyota
approximately 3,000 miles (5,000 km) (which
authorized repairer, or any reliable repairer.
Timing and accessory kits
may vary considerably depending on your
After 685 miles (1,100 km), a device is
The timing and accessory kits are used
driving style and the vehicle). An alert system
automatically activated to prevent the engine
from the time the engine is started until it
is automatically triggered when the remaining
from starting.
is switched off. It is normal for them to wear over
range reaches 1,500 miles (2,400 km), i.e. once
In both cases, a range indicator indicates
time.
the reserve level has been reached.
the distance that can be travelled before the
A faulty timing or accessory kit can damage
Several alerts are triggered successively during
vehicle is stopped.
the engine, rendering it unusable. Observe the
the remaining 1,500 miles (2,400 km) until the
recommended replacement frequency, stated in
tank is empty and the vehicle is immobilised.
distance travelled or time elapsed, whichever is
If the estimated distance travelled by the vehicle
reached first.
between two services is greater than 3,000 miles
(5,000 km), it will be necessary to top up the
AdBlue.
223
If swallowed, immediately wash out the mouth
NOTICE
WARNING
with clean water and then drink plenty of water.
In certain conditions (high temperature, for
Freezing of the AdBlue®
Never top up from an AdBlue® dispenser
example), the risk of release of ammonia cannot
AdBlue® freezes at temperatures below
reserved for heavy goods vehicles.
be excluded: do not inhale the fluid. Ammonia
around -11°C.
vapours have an irritant effect on mucous
The SCR system includes a heater for the
Storage recommendations
membranes (eyes, nose and throat).
7
AdBlue® tank, allowing you to continue driving
in very cold conditions.
AdBlue® freezes at about -11°C and deteriorates
above +25°C. Containers should be stored in a
WARNING
cool area and protected from direct sunlight.
Supply of AdBlue®
Store AdBlue® out of the reach of children, in
Under these conditions, the fluid can be kept for
its original container.
It is recommended that the AdBlue® be topped
at least a year.
up as soon as the first alert is issued indicating
If the fluid has frozen, it can be used once it has
that the reserve level has been reached.
completely thawed out in the ambient air.
Procedure
Before starting the top-up procedure, ensure that
WARNING
WARNING
the vehicle is parked on a flat and level surface.
In wintry conditions, ensure that the temperature
For the correct operation of the SCR system:
Never store AdBlue® containers in your
of the vehicle is above -11 °C. Otherwise the
- Use only AdBlue® fluid that meets the ISO
vehicle.
AdBlue® may be frozen and so cannot be poured
22241 standard.
into its tank. Park the vehicle in a warmer area
- Never transfer AdBlue® to another container
Precautions for use
for a few hours to allow the top-up to be carried
as it would lose its purity.
AdBlue® is a urea-based solution. This fluid is
out.
- Never dilute AdBlue® with water.
non-flammable, colourless and odourless (when
You can obtain AdBlue® from any authorized
kept in a cool place).
WARNING
Toyota retailer or Toyota authorized repairer,
In the event of contact with the skin, wash the
Never put the AdBlue® into the Diesel fuel
or any reliable repairer, as well as service
affected area with soap and running water. In the
tank.
stations equipped with AdBlue® pumps specially
event of contact with the eyes, immediately rinse
designed for passenger vehicles.
the eyes with large amounts of water or with an
eye wash solution for at least 15 minutes. Seek
medical attention if you feel a persistent burning
sensation or irritation.
224
Accessing the AdBlue® tank
WARNING
WARNING
If any AdBlue® is splashed, or if there are any
In order not to overfill the AdBlue® tank:
spillages on the bodywork, rinse immediately
- Add between 10 and 13 litres using
with cold water or wipe with a damp cloth.
AdBlue® containers.
If the fluid has crystallised, clean it off using a
- Stop after the nozzle’s first automatic cut-
sponge and hot water.
out, if you are refilling at a service station.
The system only registers AdBlue® top-ups of
5 litres or more.
WARNING
► To access the AdBlue® tank, open the front
left-hand door.
Important: in the event of a top-up after a
► Turn the blue cap a 6th of a turn
WARNING
breakdown because of a lack of AdBlue, it
anti-clockwise.
is essential to wait around 5 minutes before
► Release the cap upwards.
If the AdBlue® tank is completely empty
switching on the ignition, without opening
► With a container of AdBlue®: after checking
- which is confirmed by the message "Top
the driver’s door, unlocking the vehicle,
the expiry date, read the instructions on the
up AdBlue: Starting impossible" - it is
inserting the key into the ignition switch,
label carefully before pouring the contents of the
essential to add at least 5 litres.
or bringing the key for the "Smart Entry &
container into the vehicle's AdBlue tank.
Start" system into the passenger
► With an AdBlue® pump: insert the nozzle and
compartment.
fill the tank until the nozzle automatically cuts
Switch on the ignition, then wait for
out.
10 seconds before starting the engine.
► After filling, perform the same sequence of
operations in reverse order.
► Switch off the ignition and remove the key
from the switch to switch off the engine.
or
► With Smart Entry & Start, press the "START/
STOP" button to switch off the engine.
225
Free-wheeling
Reverting to normal operation
With an automatic gearbox
► Apply the parking brake.
In certain situations, you must allow the vehicle
and electric parking brake
► With an automatic gearbox, place the gear
to free-wheel (while being towed, on a rolling
selector to mode P.
road, in an automatic car wash, or being
transported by rail or sea freight, etc.).
With a manual gearbox and
To release them
The procedure varies according to the type of
7
gearbox and parking brake.
electric parking brake
► With the engine running and while depressing
the brake pedal, set the gear selector to N.
WARNING
► While depressing the brake pedal, switch off
the engine.
Never leave the vehicle unattended with the
To release them
► Release the brake pedal, then switch on the
vehicle into free-wheeling mode.
► With the engine running and while depressing
ignition.
the brake pedal, move the gear selector to the
► While depressing the brake pedal, press the
neutral position.
control lever to release the parking brake.
With manual or automatic
► While depressing the brake pedal, switch off
► Release the brake pedal, then switch off the
gearbox and manual parking
the engine.
ignition.
► Release the brake pedal, then switch on the
brake
Reverting to normal operation
ignition.
► While depressing the brake pedal, restart the
► While depressing the brake pedal, press the
engine, then set the gear selector to P.
control lever to release the parking brake.
To release them
► Release the brake pedal, then switch off the
ignition.
► With the vehicle stationary and engine
running, depress the brake pedal.
Reverting to normal operation
► With a manual gearbox, place the gear lever
► While depressing the brake pedal, restart the
into neutral.
engine and apply the parking brake.
► With an automatic gearbox, place the gear
selector to mode N.
► Release the parking brake.
► Release the brake pedal, then switch off the
engine.
226
With drive selector (Electric)
Advice on care and
NOTICE
and electric parking brake
maintenance
Smart Entry & Start
You must not depress the brake pedal while
switching the ignition on again, then switching
General recommendations
Release procedure
it off. If you do, the engine will start, requiring
Observe the following recommendations to avoid
► With the vehicle stationary and the engine
you to restart the procedure.
damaging the vehicle.
running, depress the brake pedal and select
Exterior
mode N.
WARNING
Within 5 seconds:
WARNING
► Depress and hold the brake pedal, then
A message is displayed on the instrument
observe this order: switch off the engine (if start
panel to confirm the unlocking of the wheels
Never use a high-pressure jet wash in the
with START/STOP, press and hold the button for
for 15 minutes.
engine compartment - risk of damaging the
2 seconds) and move the push selector forwards
When the vehicle is free-wheeling, the
electrical components!
or backwards.
audio system cannot be updated (message
Do not wash the vehicle in bright sunshine or
► Release the brake pedal, then switch on the
displayed on the instrument panel).
extremely cold conditions.
ignition.
► Place your foot on the brake and press the
Reverting to normal operation
NOTICE
electric parking brake control to release it.
► While depressing the brake pedal, restart the
► Release the brake pedal, then switch off the
engine, then set the gear selector to P.
When washing the vehicle in an automatic
ignition.
roller-brush car wash, be sure to lock the
doors and, depending on version, move the
electronic key away and deactivate the
“hands-free” function (Hands-Free Access).
When using a pressure washer, hold the
lance at least 30 cm from the vehicle
(particularly when cleaning areas containing
chipped paint, sensors or seals).
Promptly clean up any stains containing
chemicals liable to damage the vehicle's paint
(including tree resin, bird droppings, insect
secretions, pollen and tar).
227
If justified by the environment, clean the
Bodywork
WARNING
vehicle frequently to remove salty deposits
High-gloss paint
(in coastal areas), soot (in industrial areas)
Never attempt to clean without water.
and mud/salts (in wet or cold areas). These
Never clean your vehicle in an automatic
substances can be highly corrosive.
WARNING
roller-brush car wash.
Contact any authorized Toyota retailer or
Never select the programme with hot wax
Do not use abrasive products or solvents,
7
Toyota authorized repairer, or any reliable
finish.
petrol or oil to clean the bodywork.
repairer for advice on removing stubborn
Never use high-pressure lances equipped
Never use an abrasive sponge to clean
stains requiring special products (such as tar
with brushes - risk of scratching paint!
stubborn stains. Risk of scratching the
or insect removers).
Never apply glossy polish or preservatives to
paintwork!
Preferably, have paint touch-ups performed
the bodywork or alloy wheels; these products
Do not apply polish in strong sunshine, or to
by any authorized Toyota retailer or Toyota
irreversibly reveal glossy or spotted areas.
plastic or rubber parts.
authorized repairer, or any reliable repairer.
Interior
NOTICE
NOTICE
Choose high-pressure wash, or at least
WARNING
Use a soft sponge and soapy water or a pH
high-flow water jet.
neutral product.
Rinse the vehicle with demineralised water.
When washing the vehicle, never use a water
Gently wipe the bodywork with a clean
Only a clean microfibre cloth is recommended
hose or high-pressure jet to clean the interior.
microfibre cloth.
for wiping the vehicle; pass it over the vehicle
Liquids carried in cups or other open
Apply polish with the vehicle clean and dry.
without rubbing.
containers can spill, presenting a risk of
Comply with the instructions for use stated on
Carefully wipe off any fuel spilt on the
damage to the instruments and controls and
the product.
bodywork using a soft cloth, then allow to dry.
the controls located on the centre console. Be
Clean off minor marks (for example, finger
vigilant!
Textured paint
marks), using a maintenance product
To clean instrument panels, touch screens
This type of paint reacts under the effect of
recommended by TOYOTA.
or other displays, wipe gently with a soft,
light, through variations in appearance and
dry cloth. Do not use products (e.g. alcohol,
finish that highlight the lines and contours of the
disinfectant) or soapy water directly on these
vehicle. Its varnish is enriched with particles that
surfaces - risk of damage!
remain visible and create a unique satin effect
with relief. Its slightly granular texture gives it a
surprising touch.
228
Decals
NOTICE
(Depending on version)
Before cleaning greasy stains or liquids,
WARNING
quickly mop up any surplus.
Before cleaning, wipe off any residues liable
Do not use a high pressure washer to clean
to scuff the leather, using a cloth that has
the vehicle. Risk of damaging or detaching
been dampened with demineralised water
the decals!
and thoroughly wrung out.
Clean leather using a soft cloth moistened
with soapy water or a pH-neutral product.
NOTICE
Dry with a soft, dry cloth.
Use a high-flow hose at a temperature
between 25°C and 40°C.
Sweep the jet of water across the surface to
be cleaned, perpendicular to it.
Rinse the vehicle with demineralised water.
Leather
Leather is a natural product. Appropriate regular
care is essential for its durability.
It must be protected and nourished using a
specific leather product, to keep it supple and
preserve its original appearance.
WARNING
Do not clean leather using unsuitable
cleaning agents such as solvents, detergents,
petrol or pure alcohol.
When cleaning items partly made from
leather, take care not to damage the other
materials with the specific leather product.
229
2.0 D-4D Diesel engines
Warning triangle
Running out of fuel
► Switch on the ignition (without starting the
This reflective and dismantlable device is to be
(Diesel)
engine).
installed on the side of the road when a vehicle
With Diesel engines, the fuel system must be
► Wait around 6 seconds and switch off the
is broken down or damaged.
primed if you run out of fuel.
ignition.
Before starting to prime the system, it is
► Repeat the operation 10 times.
WARNING
8
essential to put at least 5 litres of Diesel into the
► Operate the starter motor to start the engine.
Before getting out of the vehicle
fuel tank.
If the engine does not start at the first attempt,
Turn on the hazard warning lamps, then put
do not keep trying, but restart the procedure.
NOTICE
on the safety vest to assemble and install the
triangle.
For more information on Refuelling and on
Misfuel prevention (Diesel), refer to the
Assembling and placing the
corresponding section.
triangle
NOTICE
For more information on the Engine
compartment, in particular the location of
these components under the bonnet, refer to
the corresponding section.
1.5 D-4D Diesel engines
► Switch on the ignition (without starting the
engine).
► Wait around 1 minute and switch off the
ignition.
For versions supplied with a triangle as original
► Operate the starter motor to start the engine.
equipment, refer to the illustration above.
If the engine does not start at the first attempt,
For other versions, refer to the assembly
do not keep trying, but restart the procedure.
instructions provided with the triangle.
► Put the triangle in place behind the vehicle,
as required by local legislation.
230
Tool box
NOTICE
As a safety measure, bars 1 and 2 prevent
Access
the box escaping from its housing, if it is not
correctly secured.
Removing
► Then, lift the box upwards to take it past
bar 2.
Opening
The tool box is located under the left-hand front
seat.
► Press latches A and slide them inwards to
release the box.
► To take it past bar 1, raise the box slightly
then pull it as far as it will go.
► Unclip fixings B on the cover, then open it for
access to the tools.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст