Toyota Sequoia (2018 year). Instruction — part 33
513
8-1. Specifications
8
Vehi
SEQUOIA_OM_USA_OM0C011U
■
Temperature A, B, C
The temperature grades are A (the highest), B, and C, representing
the tire’s resistance to the generation of heat and its ability to dissi-
pate heat when tested under controlled conditions on a specified
indoor laboratory test wheel.
Sustained high temperature can cause the material of the tire to
degenerate and reduce tire life, and excessive temperature can lead
to sudden tire failure.
Grade C corresponds to a level of performance which all passenger
car tires must meet under the Federal Motor Vehicle Safety Stan-
dard No. 109.
Grades B and A represent higher levels of performance on the labo-
ratory test wheel than the minimum required by law.
Warning: The temperature grades of a tire assume that it is properly
inflated and not overloaded.
Excessive speed, underinflation, or excessive loading, either sepa-
rately or in combination, can cause heat buildup and possible tire
failure.
514
SEQUOIA_OM_USA_OM0C011U
Glossary of tire terminology
Tire related term
Meaning
Cold tire inflation pres-
sure
Tire pressure when the vehicle has been
parked for three hours or more, or has not
been driven more than 1 mile or 1.5 km under
that condition
Maximum inflation
pressure
The maximum cold inflated pressure to which
a tire may be inflated, shown on the sidewall
of the tire
Recommended infla-
tion pressure
Cold tire inflation pressure recommended by a
manufacturer
Accessory weight
The combined weight (in excess of those stan-
dard items which may be replaced) of auto-
matic transmission, power steering, power
brakes, power windows, power seats, radio
and heater, to the extent that these items are
available as factory-installed equipment
(whether installed or not)
Curb weight
The weight of a motor vehicle with standard
equipment, including the maximum capacity of
fuel, oil and coolant, and if so equipped, air
conditioning and additional weight optional
engine
Maximum loaded vehi-
cle weight
The sum of:
(a) Curb weight
(b) Accessory weight
(c) Vehicle capacity weight
(d) Production options weight
Normal occupant
weight
150 lb. (68 kg) times the number of occupants
specified in the second column of Table 1
*
that follows
Occupant distribution
Distribution of occupants in a vehicle as speci-
fied in the third column of Table 1
*
below
515
8-1. Specifications
8
Vehi
SEQUOIA_OM_USA_OM0C011U
Production options
weight
The combined weight of installed regular pro-
duction options weighing over 5 lb. (2.3 kg) in
excess of the standard items which they
replace, not previously considered in curb
weight or accessory weight, including heavy
duty brakes, ride levelers, roof rack, heavy
duty battery, and special trim
Rim
A metal support for a tire or a tire and tube
assembly upon which the tire beads are
seated
Rim diameter
(Wheel diameter)
Nominal diameter of the bead seat
Rim size designation
Rim diameter and width
Rim type designation
The industry manufacturer’s designation for a
rim by style or code
Rim width
Nominal distance between rim flanges
Vehicle capacity
weight (Total load
capacity)
The rated cargo and luggage load plus 150 lb.
(68 kg) times the vehicle’s designated seating
capacity
Vehicle maximum load
on the tire
The load on an individual tire that is deter-
mined by distributing to each axle its share of
the maximum loaded vehicle weight, and
dividing by two
Vehicle normal load on
the tire
The load on an individual tire that is deter-
mined by distributing to each axle its share of
curb weight, accessory weight, and normal
occupant weight (distributed in accordance
with Table 1
*
below), and dividing by two
Weather side
The surface area of the rim not covered by the
inflated tire
Bead
The part of the tire that is made of steel wires,
wrapped or reinforced by ply cords and that is
shaped to fit the rim
Bead separation
A breakdown of the bond between compo-
nents in the bead
Tire related term
Meaning
516
SEQUOIA_OM_USA_OM0C011U
Bias ply tire
A pneumatic tire in which the ply cords that
extend to the beads are laid at alternate
angles substantially less than 90 degrees to
the centerline of the tread
Carcass
The tire structure, except tread and sidewall
rubber which, when inflated, bears the load
Chunking
The breaking away of pieces of the tread or
sidewall
Cord
The strands forming the plies in the tire
Cord separation
The parting of cords from adjacent rubber
compounds
Cracking
Any parting within the tread, sidewall, or inner-
liner of the tire extending to cord material
CT
A pneumatic tire with an inverted flange tire
and rim system in which the rim is designed
with rim flanges pointed radially inward and
the tire is designed to fit on the underside of
the rim in a manner that encloses the rim
flanges inside the air cavity of the tire
Extra load tire
A tire designed to operate at higher loads and
at higher inflation pressures than the corre-
sponding standard tire
Groove
The space between two adjacent tread ribs
Innerliner
The layer(s) forming the inside surface of a
tubeless tire that contains the inflating medium
within the tire
Innerliner separation
The parting of the innerliner from cord material
in the carcass
Intended outboard
sidewall
(a) The sidewall that contains a whitewall,
bears white lettering, or bears manufac-
turer, brand, and/or model name molding
that is higher or deeper than the same
molding on the other sidewall of the tire, or
(b) The outward facing sidewall of an asym-
metrical tire that has a particular side that
must always face outward when mounted
on a vehicle
Tire related term
Meaning
517
8-1. Specifications
8
Vehi
SEQUOIA_OM_USA_OM0C011U
Light truck (LT) tire
A tire designated by its manufacturer as pri-
marily intended for use on lightweight trucks
or multipurpose passenger vehicles
Load rating
The maximum load that a tire is rated to carry
for a given inflation pressure
Maximum load rating
The load rating for a tire at the maximum per-
missible inflation pressure for that tire
Maximum permissible
inflation pressure
The maximum cold inflation pressure to which
a tire may be inflated
Measuring rim
The rim on which a tire is fitted for physical
dimension requirements
Open splice
Any parting at any junction of tread, sidewall,
or innerliner that extends to cord material
Outer diameter
The overall diameter of an inflated new tire
Overall width
The linear distance between the exteriors of
the sidewalls of an inflated tire, including ele-
vations due to labeling, decorations, or protec-
tive bands or ribs
Passenger car tire
A tire intended for use on passenger cars,
multipurpose passenger vehicles, and trucks,
that have a gross vehicle weight rating
(GVWR) of 10,000 lb. or less.
Ply
A layer of rubber-coated parallel cords
Ply separation
A parting of rubber compound between adja-
cent plies
Pneumatic tire
A mechanical device made of rubber, chemi-
cals, fabric and steel or other materials, that,
when mounted on an automotive wheel, pro-
vides the traction and contains the gas or fluid
that sustains the load
Radial ply tire
A pneumatic tire in which the ply cords that
extend to the beads are laid at substantially 90
degrees to the centerline of the tread
Reinforced tire
A tire designed to operate at higher loads and
at higher inflation pressures than the corre-
sponding standard tire
Tire related term
Meaning
518
SEQUOIA_OM_USA_OM0C011U
*
: Table 1
⎯ Occupant loading and distribution for vehicle normal load for
various designated seating capacities
Section width
The linear distance between the exteriors of
the sidewalls of an inflated tire, excluding ele-
vations due to labeling, decoration, or protec-
tive bands
Sidewall
That portion of a tire between the tread and
bead
Sidewall separation
The parting of the rubber compound from the
cord material in the sidewall
Snow tire
A tire that attains a traction index equal to or
greater than 110, compared to the ASTM
E-1136 Standard Reference Test Tire, when
using the snow traction test as described in
ASTM F-1805-00, Standard Test Method for
Single Wheel Driving Traction in a Straight
Line on Snow-and Ice-Covered Surfaces, and
which is marked with an Alpine Symbol (
)
on at least one sidewall
Test rim
The rim on which a tire is fitted for testing, and
may be any rim listed as appropriate for use
with that tire
Tread
That portion of a tire that comes into contact
with the road
Tread rib
A tread section running circumferentially
around a tire
Tread separation
Pulling away of the tread from the tire carcass
Treadwear indicators
(TWI)
The projections within the principal grooves
designed to give a visual indication of the
degrees of wear of the tread
Wheel-holding fixture
The fixture used to hold the wheel and tire
assembly securely during testing
Tire related term
Meaning
519
8-1. Specifications
8
Vehi
SEQUOIA_OM_USA_OM0C011U
Designated seating
capacity, Number of
occupants
Vehicle normal load,
Number of occupants
Occupant distribution
in a normally loaded
vehicle
2 through 4
2
2 in front
5 through 10
3
2 in front, 1 in second
seat
11 through 15
5
2 in front, 1 in second
seat, 1 in third seat, 1
in fourth seat
16 through 20
7
2 in front, 2 in second
seat, 2 in third seat, 1
in fourth seat
520
SEQUOIA_OM_USA_OM0C011U
Customizable features
■
Changing by using the multimedia system
Press the “APPS” button.
Select “Apps” screen.
Select “Vehicle” on the “Setup” screen.
Select “Vehicle Customization” on the “Vehicle Settings” screen.
“Vehicle Customization” screen will appear.
Choose a category displayed on the screen to display the set-
tings.
Your vehicle includes a variety of electronic features that can be
personalized to your preferences. Programming these prefer-
ences requires specialized equipment and may be performed by
your Toyota dealer.
Customizing vehicle features
1
2
3
4
5
521
8
Vehi
SEQUOIA_OM_USA_OM0C011U
Select the setting to be changed. Change each setting.
For items that can be enabled/disabled, and for items with an
operating time that can be changed, select “On” or “Off”, or select
the desired operating time.
For items with sensor sensitivity that can be changed, select “+”
or “-” to choose the desired level, then select “OK”.
A message indicating that the settings are being saved will
appear. Do not perform any other operations while this message
is displayed.
■
Changing by using the multi-information display
Press “<” or “>” of the meter control switches, select
.
Press “
∧” or “∨” of the meter control switches, select “Meter
Settings”, and then press
.
Press “
∧” or “∨” of the meter control switches, select the item,
and then press
.
Press “
∧” or “∨” of the meter control switches, select the desired
setting, and then press
.
Some function settings are changed simultaneously with other func-
tions being customized. Contact your Toyota dealer for further details.
Settings that can be changed using the multi-information display.
Settings that can be changed using the multimedia system.
Settings that can be changed by your Toyota dealer.
Definition of symbols: O = Available, — = Not available
Customizable features
6
7
1
2
3
4
522
SEQUOIA_OM_USA_OM0C011U
■
Gauges, meters and multi-information display (
*
1
: For details about each function:
→
*
2
: The default setting varies according to country.
*
3
: Some status screens cannot be registered (indicated on multi-information
display).
*
4
: Following items: current fuel economy (bar type), average fuel economy
(total average, trip average or tank average), average speed (average
speed or trip average speed), elapsed time (total time or trip time), dis-
tance (range or trip distance), other (blank).
Function
*
1
Default setting
Customized
setting
Language
*
2
English
French
O
O
O
Spanish
Units
*
2
miles
(MPG USA)
miles
(MPG
Imperial)
O
O
O
km (km/L)
km (L/100 km)
Switch settings
Drive
information 1
Desired status
screen
*
3
O
—
O
Drive information 1
Average Fuel
Economy
*
4
O
—
O
Current Fuel
Economy
Drive information 2
Distance after
Start
*
4
O
—
O
Travel Time
after Start
Pop-up display
On
Off
O
—
O
Color
Blue
Green
O
—
O
Orange
Yellow
523
8
Vehi
SEQUOIA_OM_USA_OM0C011U
■
LDA (Lane Departure Alert) (
■
PCS (Pre-Collision System) (
Function
Default setting
Customized
setting
LDA sensitivity
1 (Standard)
2 (High)
O
—
O
Sway warning
On
Off
O
—
O
Sway Warning sensitivity
2 (Standard)
1 (Low)
O
—
O
3 (High)
Function
Default setting
Customized
setting
PCS
On
Off
O
—
O
PCS sensitivity
2 (Middle)
1 (Near)
O
—
O
3 (Far)
524
SEQUOIA_OM_USA_OM0C011U
■
BSM (Blind Spot Monitor) (
■
Door lock (
Function
Default setting
Customized
setting
BSM
On
Off
O
—
O
BSM brightness
Standard
Dim
O
—
O
RCTA
(Rear Cross Traffic Alert)
On
Off
O
—
O
RCTA volume
2
1
O
—
O
3
Function
Default setting
Customized
setting
Unlocking using a key
Driver’s door
unlocked in one
step, all doors
unlocked in two
steps
All doors
unlocked in
one step
—
—
O
Speed-detecting auto-
matic door lock function
On
Off
—
O
O
Automatic door lock
Shifting the shift
lever to position
other than P
Off
—
O
O
Vehicle speed
reaches a cer-
tain level
Automatic door unlock
Shifting the shift
lever to P
Off
—
O
O
Driver’s door
is opened
Opening the driver’s door
unlocks all doors
Off
On
—
O
O
525
8
Vehi
SEQUOIA_OM_USA_OM0C011U
■
Wireless remote control (
*
: It is possible to select them only when the power back door operation with
the open/close switch is made impossible when the door is locked.
Function
Default setting
Customized
setting
Wireless remote control
On
Off
—
—
O
Unlocking operation
Driver’s door
unlocked in one
step, all doors
unlocked in two
steps
All doors
unlocked in
one step
—
O
O
Time elapsed before auto-
matic door lock function is
activated if door is not
opened after being
unlocked
60 seconds
Off
—
O
O
30 seconds
120 seconds
Operation signal
(Emergency flashers)
On
Off
—
O
O
Operation signal
(Buzzer)
On
Off
—
O
O
Panic function
On
Off
—
—
O
Locking operation when
door opened
On
Off
—
O
O
Power back door opera-
tion
Push and hold
Push twice
*
—
—
O
One short
push
*
526
SEQUOIA_OM_USA_OM0C011U
■
Power back door (
■
Power windows (
→P. 149)
■
Power back window (
■
Rear window wiper and washer (
Function
Default setting
Customized
setting
Switch operation
Push and hold
One short
push
—
—
O
Wireless remote control
linked operation
On
Off
—
—
O
Operation signal volume
Off
On
—
—
O
Operation when door
locks
Possible
Impossible
—
—
O
Time elapsed before back
door closing function is
activated when pushing
switch in the luggage
compartment
1.5 seconds
0 seconds
—
—
O
1 seconds
2 seconds
Function
Default setting
Customized
setting
Door key linked operation
Open and close
Open only
—
—
O
Close only
Off
Function
Default setting
Customized
setting
Linked back door key
operation
Open and close
Open only
—
—
O
Close only
Sensitivity of jam protec-
tion function
Level 1
Level 2 to 4
—
—
O
Function
Default setting
Customized
setting
Washer linkage wiper con-
trol
On
Off
—
—
O
Drip prevention function
On
Off
—
—
O
527
8
Vehi
SEQUOIA_OM_USA_OM0C011U
■
Moon roof (
■
Automatic light off system (
■
Daytime running lights
*
(
*
: Except for Canada
■
Driving position memory
*
(
*
: If equipped
Function
Default setting
Customized
setting
Door key linked operation
Open and close
Open only
—
—
O
Close only
Off
Linked operation of com-
ponents when door key is
used
Slide only
Tilt only
—
—
O
Function
Default setting
Customized
setting
Light sensor sensitivity
Level 3
Level 1 to 5
—
O
O
Time elapsed before
headlights automatically
turn off after doors are
closed
30 seconds
Off
—
O
O
60 seconds
90 seconds
Function
Default setting
Customized
setting
Daytime running light sys-
tem
On
Off
—
O
O
Function
Default setting
Customized
setting
Selection the door linking
driving position memory
with door unlock operation
Driver’s door
All doors
—
—
O
528
SEQUOIA_OM_USA_OM0C011U
■
Illumination (
■
Seat Belt Reminder Buzzer (
→P. 451)
Function
Default setting
Customized
setting
Time elapsed before lights
turn off
15 seconds
Off
—
O
O
7.5 seconds
30 seconds
Operation after the engine
is off
On
Off
—
—
O
Operation when the doors
are unlocked
On
Off
—
—
O
Time elapsed before the
exterior lights turn off
15 seconds
Off
—
O
O
7.5 seconds
30 seconds
Function
Default setting
Customized
setting
Vehicle speed linked seat
belt reminder buzzer
On
Off
—
—
O
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст