Toyota Yaris Cross (2022 year). Manual in english — page 28
451
8
n
8-1. Specifications
Vehi
cle s
pec
ifi
cati
ons
Preferred
Temperature range anticipated
before next oil change
SAE 0W-16 is filled into your Toyota
vehicle at manufacturing, and the
best choice for good fuel economy
and good starting in cold weather. If
SAE 0W-16 oil is not available,
SAE 0W-20 oil may be used. How-
ever, it should be replaced with
SAE 0W-16 at the next oil change.
Oil viscosity (0W-16 is explained
here as an example):
• The 0W in 0W-16 indicates the
characteristic of the oil which
allows cold startability. Oils with a
lower value before the W allow
for easier starting of the engine
in cold weather.
• The 16 in 0W-16 indicates the
viscosity characteristic of the oil
when the oil is at high tempera-
ture. An oil with a higher viscos-
ity (one with a higher value) may
be better suited if the vehicle is
operated at high speeds, or
under extreme load conditions.
How to read oil container labels:
Either or both API registered marks
are added to some oil containers to
help you select the oil you should
use.
API Service Symbol
Top portion: “API SERVICE SP” means
the oil quality designation by American
Petroleum Institute (API).
Center portion: “SAE 0W-16” means
the SAE viscosity grade.
Lower portion: “Resource-Conserving”
means that the oil has fuel-saving and
environmental protection capabilities.
ILSAC Certification Mark
The International Lubricant Specifica-
tion Advisory Committee (ILSAC) Certi-
fication Mark is displayed on the front of
the container.
452
n
8-1. Specifications
*
: The fluid capacity is a reference quantity.
If replacement is necessary, contact any authorized Toyota retailer or Toyota
authorized repairer, or any reliable repairer.
Cooling system
Capacity (Reference)
4.7 L (5.0 qt., 4.1 Imp. qt.)
Coolant type
Use either of the following:
“Toyota Super Long Life Coolant”
Similar high-quality ethylene glycol-based non-sili-
cate, non-amine, non-nitrite, and non-borate coolant
with long-life hybrid organic acid technology
Do not use plain water alone.
Ignition system (spark plug)
Make
DENSO FC16HR-Q8
NGK DILKAR6T8
Gap
0.8 mm (0.031 in.)
NOTICE
■
Iridium-tipped spark plugs
Use only iridium-tipped spark plugs. Do not adjust the spark plug gap.
Electrical system (battery)
Open voltage at 20°C (68°F):
12.3 V or higher
(Turn the engine switch off and turn on the high
beam headlights for 30 seconds.)
Charging rates
Quick charge
Slow charge
15 A max.
5 A max.
Multidrive
Fluid capacity
*
8.43 L (8.9 qt., 7.4 Imp. qt.)
Fluid type
“Toyota Genuine CVT Fluid FE”
453
8
n
8-1. Specifications
Vehi
cle s
pec
ifi
cati
ons
NOTICE
■
Multidrive fluid type
Using Multidrive fluid other than the above type may cause abnormal noise or
vibration, or damage the Multidrive of your vehicle.
Manual transmission
Gear oil capacity (Reference)
2.1 L (2.2 qt., 1.8 Imp. qt.)
Gear oil type
“TOYOTA Genuine Manual Transmission Gear
Oil LV GL-4 75W” or equivalent
NOTICE
■
Manual transmission gear oil type
●
Please be aware that depending on the particular characteristics of the gear oil
used or the operating conditions, idle sound, shift feeling and/or fuel efficiency
may be different or affected and, in the worst case, damage to the vehicle’s
transmission.
Toyota recommends to use “TOYOTA Genuine Manual Transmission Gear Oil
LV GL-4 75W” to achieve optimal performance.
●
Your Toyota vehicle is filled with “TOYOTA Genuine Manual Transmission Gear
Oil LV GL-4 75W” at the factory.
Use Toyota approved “TOYOTA Genuine Manual Transmission Gear Oil LV GL-
4 75W” or an equivalent oil of matching quality that satisfies the above specifica-
tions.
Please contact any authorized Toyota retailer or Toyota authorized repairer, or
any reliable repairer for further details.
Clutch (Manual transmission)
Pedal free play
3
15 mm (0.1
0.6 in.)
Fluid type
SAE J1704 or FMVSS No.116 DOT 4
Brakes
Pedal clearance
*1
87 mm (3.4 in.) Min.
Pedal free play
1
6 mm (0.04
0.24 in.)
454
n
8-1. Specifications
*1
: Minimum pedal clearance when depressed with a force of 300 N (31.0 kgf, 67.4
lbf) while the engine is running.
*2
: Make sure to confirm that the brake warning light (yellow) does not illuminate. (If
the brake warning light illuminates, refer to P.81, 410)
16-inch tires
17-inch tires
Parking brake indicator
*2
When pulling the parking brake switch for 1 to 2
seconds: comes on
When pushing the parking brake switch for 1 to
2 seconds: turns off
Fluid type
SAE J1704 or FMVSS No.116 DOT 4
Steering
Free play
Less than 30 mm (1.2 in.)
Tires and wheels
Tire size
205/65R16 95H
Tire inflation pressure
(Recommended cold tire
inflation pressure)
Front tire
230 kPa (2.3 kgf/cm
2
or bar, 33 psi)
Rear tire
220 kPa (2.2 kgf/cm
2
or bar, 32 psi)
Wheel size
16
6 1/2J
Wheel nut torque
103 N•m (10.5 kgf•m, 76 ft•lbf)
Tire size
215/55R17 94V
Tire inflation pressure
(Recommended cold tire
inflation pressure)
Front tire
220 kPa (2.2 kgf/cm
2
or bar, 32 psi)
Rear tire
200 kPa (2.0 kgf/cm
2
or bar, 29 psi)
Wheel size
17
7J
Wheel nut torque
103 N•m (10.5 kgf•m, 76 ft•lbf)
455
8
n
8-1. Specifications
Vehi
cle s
pec
ifi
cati
ons
18-inch tires
Compact spare tire (if equipped)
*
: If equipped
A: HIR2 halogen bulbs
B: Wedge base bulbs (amber)
C: Wedge base bulbs (clear)
Tire size
215/50R18 92V
Tire inflation pressure
(Recommended cold tire
inflation pressure)
Front tire
220 kPa (2.2 kgf/cm
2
or bar, 32 psi)
Rear tire
200 kPa (2.0 kgf/cm
2
or bar, 29 psi)
Wheel size
18
7J
Wheel nut torque
103 N•m (10.5 kgf•m, 76 ft•lbf)
Tire size
T145/90D16 106M
Tire inflation pressure
(Recommended cold tire
inflation pressure)
420 kPa (4.2 kgf/cm
2
or bar, 60 psi)
Wheel size
16
4T
Wheel nut torque
103 N•m (10.5 kgf•m, 76 ft•lbf)
Light bulbs
Light bulbs
W
Type
Exterior
Halogen headlights (bulb type)
55
A
Front turn signal lights (bulb type)
21
B
Rear turn signal lights (bulb type)
21
B
Back up light (bulb type)
16
C
License plate light
5
C
Interior
Vanity lights
*
8
C
Interior lights/personal lights
5
C
Luggage compartment light
5
C
456
n
8-1. Specifications
■
Use of ethanol blended gasoline in
a gasoline engine
Toyota allows the use of ethanol
blended gasoline where the ethanol
content is up to 10%. Make sure that the
ethanol blended gasoline to be used has
a Research Octane Number that follows
the above.
■
If your engine knocks
●
Consult any authorized Toyota retailer
or Toyota authorized repairer, or any
reliable repairer.
●
You may occasionally notice light
knocking for a short time while accel-
erating or driving uphill. This is normal
and there is no need for concern.
Fuel information
When you find these types of
fuel label at the gas station,
use only the fuel with one of
the following labels.
EU area
You must only use unleaded
gasoline conforming to Euro-
pean standard EN228.
Select unleaded gasoline with
a Research Octane Number of
95 or higher for optimum
engine performance.
Except EU area
You must only use unleaded
gasoline.
Select unleaded gasoline with
a Research Octane Number of
95 or higher for optimum
engine performance.
NOTICE
■
Notice on fuel quality
●
Do not use improper fuels. If
improper fuels are used, the engine
will be damaged.
●
Do not use gasoline with metallic
additives, for example manganese,
iron or lead, otherwise it may cause
damage on your engine or emission
control system.
●
Do not add aftermarket fuel addi-
tives which contain metallic addi-
tives.
●
EU area: Bioethanol fuel sold under
names such as “E50” or “E85” and
fuel containing a large amount of
ethanol should not be used. The
use of these fuels will damage the
vehicle’s fuel system. In case of any
doubt, ask any authorized Toyota
retailer or Toyota authorized
repairer, or any reliable repairer.
●
Except EU area: Bioethanol fuel
sold under names such as “E50” or
“E85” and fuel containing a large
amount of ethanol should not be
used. Your vehicle can use gasoline
mixed with 10% max ethanol. The
use of fuel with more than 10% eth-
anol content (E10) will damage the
vehicle’s fuel system. You must
ensure that refueling is carried out
only from a source where fuel spec-
ification and quality can be guaran-
teed. In case of any doubt, ask any
authorized Toyota retailer or Toyota
authorized repairer, or any reliable
repairer.
●
Do not use the methanol blended
gasoline such as M15, M85, M100.
The use of gasoline containing
methanol may cause engine dam-
age or failure.
457
8
n
8-2. Customization
Vehi
cle s
pec
ifi
cati
ons
8-2.Customization
■
Changing by using the naviga-
tion/multimedia system screen
(vehicles with 7-inch/8-inch
display multimedia system)
1
Press the “MENU” button.
2
Select “Setup” on the “Menu”
screen.
3
Select “Vehicle” on the “Setup”
screen.
4
4 Select “Vehicle customiza-
tion”.
Various setting can be changed. Refer
to the list of settings that can be
changed for details.
■
Changing by using the meter
control switches
1
Press
/
(4.2-inch display)
or
/
(7-inch display) of
the meter control switch to
select
.
2
Press
/
(4.2-inch display)
or
/
(7-inch display) of
the meter control switch to
select the desired item to be
customized.
3
Press or press and hold
.
The available settings will differ
depending on if
is pressed or
pressed and held. Follow the instruc-
tions on the display.
Customizable features
Your vehicle includes a variety
of electronic features that can
be personalized to suit your
preferences. The settings of
these features can be changed
using the multi-information
display, the navigation/multi-
media system or at any autho-
rized Toyota retailer or Toyota
authorized repairer, or any reli-
able repairer.
Customizing vehicle fea-
tures
WARNING
■
During customization
As the engine needs to be running
during customization, ensure that the
vehicle is parked in a place with ade-
quate ventilation. In a closed area
such as a garage, exhaust gases
including harmful carbon monoxide
(CO) may collect and enter the vehi-
cle. This may lead to death or a seri-
ous health hazard.
NOTICE
■
During customization
To prevent battery discharge, ensure
that the engine is running while cus-
tomizing features.
458
n
8-2. Customization
Some function settings are changed simultaneously with other functions
being customized. Contact any authorized Toyota retailer or Toyota autho-
rized repairer, or any reliable repairer for further details.
Settings that can be changed using the 7-inch/8-inch display multimedia
system
Settings that can be changed using the multi-information display
Settings that can be changed by any authorized Toyota retailer or Toyota
authorized repairer, or any reliable repairer
Definition of symbols: O = Available, — = Not available
■
Alarm
*
(
P.77)
*
: If equipped
■
Gauges, meters and multi-information display (
P.85, 89, 94, 100)
Customizable features
Function
Default setting
Customized setting
Deactivates the alarm
when the doors are
unlocked using the key or
mechanical key
Off
On
—
—
O
Function
*1
Default setting
Customized setting
Language
*2
English
Except English
*3
—
O
—
Units
*2
L/100 km
km/L
—
O
—
miles (MPG)
*4
Speedometer display
*5
Analog
Digital
—
O
—
Eco Driving Indicator
Light
*4
On
Off
—
O
—
Fuel economy display
Total average
(Average fuel
consumption
[after reset])
Trip average (Aver-
age fuel consump-
tion [after start])
—
O
—
Tank average (Aver-
age fuel consump-
tion [after refuel])
459
8
n
8-2. Customization
Vehi
cle s
pec
ifi
cati
ons
*1
: For details about each function:
P.98, 104
*2
: The default setting varies according to country.
*3
: Available languages may differ depending on the target region.
*4
: If equipped
*5
: Vehicles with 7-inch display only
■
Head-up display
*
(
P.106)
*
: If equipped
Audio system linked dis-
play
*4
On
Off
—
O
—
Drive information type
Trip (after start)
Total (after reset)
—
O
—
Drive information items
(First item)
Distance
Average vehicle
speed
—
O
—
Elapsed time
Drive information items
(Second item)
Elapsed time
Average vehicle
speed
—
O
—
Distance
Pop-up display
On
Off
—
O
—
Function
Default setting
Customized setting
Head-up display
On
Off
—
O
—
Gauge information
Tachometer
Eco Driving Indicator
*
—
O
—
No content
Route guidance to destina-
tion/street name
*
On
Off
—
O
—
Driving support system dis-
play
*
On
Off
—
O
—
Compass
*
On
Off
—
O
—
Audio system operation
status
*
On
Off
—
O
—
Function
*1
Default setting
Customized setting
460
n
8-2. Customization
■
Smart entry & start system
*
and wireless remote control (
P.119,
136)
*
: If equipped
■
Smart entry & start system
*
(
P.119, 125, 136)
*
: If equipped
■
Wireless remote control (
P.116, 119)
■
Power back door
*
(
P.126)
Function
Default setting
Customized setting
Operation signal (Emer-
gency flashers)
On
Off
O
—
O
Time elapsed before auto-
matic door lock function is
activated if door is not
opened after being
unlocked
30 seconds
60 seconds
—
—
O
120 seconds
Open door warning buzzer
On
Off
—
—
O
Function
Default setting
Customized setting
Smart entry & start system
On
Off
O
—
O
Number of consecutive
door lock operations
2 times
As many as desired
—
—
O
Function
Default setting
Customized setting
Wireless remote control
On
Off
—
—
O
Function
Default setting
Customized setting
Power back door
On
Off
—
O
—
Power back door opening
position
5
1 to 4
—
O
—
User optional setting —
O
—
Buzzer volume
Level 3
Level 1
—
O
—
Level 2
Kick sensor
On
Off
—
O
—
461
8
n
8-2. Customization
Vehi
cle s
pec
ifi
cati
ons
*
: If equipped
■
Outside rear view mirrors (
P.150)
*
: If equipped
■
Power windows (
P.153)
*
: If equipped
■
Automatic light control system (
P.192)
■
Lights (
P.193)
Kick sensor sensitivity
+2
+0
—
—
O
+1
Function
Default setting
Customized setting
Automatic mirror folding
and extending operation
*
Linked to the
locking/ unlock-
ing of the doors
Off
—
—
O
Linked to operation of
the engine switch
Function
Default setting
Customized setting
Key (include mechanical
key
*
) linked operation
Off
On
—
—
O
Wireless remote control
linked operation
Off
On
—
—
O
Wireless remote control
linked operation signal
(buzzer)
On
Off
—
—
O
Function
Default setting
Customized setting
Light sensor sensitivity
Standard
-2 to 2
O
—
O
Extended headlight light-
ing function (Time elapsed
before headlights automati-
cally turn off)
30 seconds
60 seconds
—
—
O
90 seconds
120 seconds
Function
Default setting
Customized setting
Welcome lamp
On
Off
—
—
O
Function
Default setting
Customized setting
462
n
8-2. Customization
■
AHS (Adaptive High-beam System)
*1
(
P.197)
*1
: If equipped
*2
: The headlights will operate under Automatic High Beam control. (
P.201)
■
Rear window wiper (
P.208)
Function
Default setting
Customized setting
Adaptive High-beam Sys-
tem
On
Off
*2
—
—
O
Vehicle speed at which the
brightness and illuminated
area adjustment of the high
beams changes mode
Approximately
15 km/h (10
mph) or more
Approximately 30
km/h (18 mph) or
more
—
—
O
Approximately 60
km/h (37 mph) or
more
Intensity adjustment of the
high beams when driving
around a curve (illuminates
the area in the direction
vehicle is turning more
brightly)
On
Off
—
—
O
Projection distance adjust-
ment of the low beams
according to the distance to
a preceding vehicle
On
Off
—
—
O
Function
Default setting
Customized setting
Rear window wiper opera-
tion when the back door is
opened
Off
On
—
—
O
Washer linked rear window
wiper operation
On
Off
—
—
O
Shift position linked rear
window wiper operation
Once
Off
—
—
O
Continuous
463
8
n
8-2. Customization
Vehi
cle s
pec
ifi
cati
ons
■
PCS (Pre-Collision System)
*
(
P.217)
*
: If equipped
■
LTA (Lane Tracing Assist)
*
(
P.228)
*
: If equipped
■
RSA (Road Sign Assist)
*1
(
P.263)
*1
: If equipped
*2
: RSA function becomes On when the engine switch is turned to ON.
Function
Default setting
Customized setting
PCS (Pre-Collision Sys-
tem)
On
Off
—
O
—
Adjust alert timing
Middle
Early
—
O
—
Late
Function
Customized setting
Lane centering function
On / Off
—
O
—
Alert types
Buzzer / Steering
wheel vibration
—
O
—
Alert sensitivity
High / Standard
—
O
—
Vehicle sway warning function
On / Off
—
O
—
Vehicle sway warning sensitivity
High / Standard / Low —
O
—
Function
Default setting
Customized setting
RSA (Road Sign Assist)
*2
On
Off
—
O
—
Excess speed notification
method
*3
Display only
No notification
—
O
—
Display and buzzer
Excess speed notification
level
2 km/h (1 mph)
5 km/h (3 mph)
—
O
—
10 km/h (5 mph)
No overtaking notification
method
Display only
No notification
—
O
—
Display and buzzer
Other notifications method
(No-entry notification)
*4
Display only
No notification
—
O
—
Display and buzzer
464
n
8-2. Customization
*3
: If a speed limit with supplemental mark is exceeded, the notification buzzer does
not operate.
*4
: Vehicles with 7-inch/8-inch display navigation system
■
Dynamic radar cruise control
*
(
P.238, 250)
*
: If equipped
■
Stop & Start system
*
(
P.267)
*
: If equipped
■
BSM (Blind Spot Monitor)
*
(
P.272)
*
: If equipped
■
Toyota parking assist-sensor
*
(
P.277)
Function
Default setting
Customized setting
Radar Cruise Control with
Road Sign Assist
Off
On
—
O
—
Function
Default setting
Customized setting
Change the Stop & Start
system duration when the
A/C is on
Standard
Extended
—
O
—
Function
Default setting
Customized setting
BSM (Blind Spot Monitor)
function
On
Off
—
O
—
Outside rear view mirror
indicator brightness
Bright
Dim
—
O
—
Alert timing for presence of
approaching vehicle (sensi-
tivity)
Intermediate
Early
—
O
—
Late
Only when vehicle
detected in blind spot
Function
Default setting
Customized setting
Toyota parking assist-sen-
sor
On
Off
—
O
—
Buzzer volume
Level 2
Level 1
—
O
—
Level 3
465
8
n
8-2. Customization
Vehi
cle s
pec
ifi
cati
ons
*
: If equipped
■
RCTA (Rear Crossing Traffic Alert)
*
(
P.284)
*
: If equipped
■
PKSB (Parking Support Brake)
*
(
P.289)
*
: If equipped
■
Automatic air conditioning system
*
(
P.316)
*
: If equipped
■
Rear seat reminder (
P.121)
■
Illumination (
P.324)
Function
Default setting
Customized setting
RCTA (Rear Crossing Traf-
fic Alert) function
On
Off
—
O
—
Buzzer volume
Level 2
Level 1
—
O
—
Level 3
Function
Default setting
Customized setting
PKSB (Parking Support
Brake) function
On
Off
—
O
—
Function
Default setting
Customized setting
Switching between outside
air and recirculated air
mode linked to automatic
mode switch operation
On
Off
O
—
O
Function
Default setting
Customized setting
Indication to prevent mis-
placement in the rear seat
On
Off
—
O
—
Function
Default setting
Customized setting
Time elapsed before the
interior lights turn off
15 seconds
Off
O
—
O
7.5 seconds
30 seconds
466
n
8-2. Customization
*
: If equipped
■
Vehicle customization
When the smart entry & start system is
off, Smart door unlocking cannot be cus-
tomized.
■
In the following situations, custom-
ize mode in which the settings can
be changed through the multi-infor-
mation display will automatically
be turned off
●
A warning message appears after the
customize mode screen is displayed
●
The engine switch is turned off.
●
The vehicle begins to move while the
customize mode screen is displayed.
Operation after the engine
switch is turned off
On
Off
—
—
O
Operation when the doors
are unlocked
On
Off
—
—
O
Operation when you
approach the vehicle with
the electronic key on your
person
*
On
Off
—
—
O
Footwell lights
*
, front con-
sole light and door trim
lights
*
On
Off
—
—
O
Function
Default setting
Customized setting
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст