Toyota Yaris Cross (2022 year). Manual in english — page 6
96
n
2-1. Instrument cluster
For details regarding the hands-free
system, refer to the “Navigation and
multimedia system Owner’s manual”.
■
Display items
Fuel economy
Eco Driving Indicator/Driving
range (if equipped)
■
Fuel economy
Use the displayed values as a refer-
ence only.
Current fuel consumption
Displays instantaneous current fuel
consumption.
Average fuel economy (after
reset)
To reset the average fuel economy dis-
play, press and hold the
meter
control switch.
Driving range
Displays driving range with remaining
fuel.
This distance is computed based on
your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.
When only a small amount of fuel is
added to the tank, the display may not
be updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without
turning the engine switch off, the dis-
play may not be updated.
The average fuel economy display
can be changed in
. (
P.98)
Average fuel economy (after
start)
Displays the average fuel consumption
since engine start.
Average fuel economy (after
refuel)
Displays the average fuel consumption
since the vehicle was refueled.
■
Eco Driving Indicator/Driving
range (if equipped)
Eco Driving Indicator
Eco Driving Indicator Light
During Eco-friendly acceleration (Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
Content of driving informa-
tion
97
2
n
2-1. Instrument cluster
Vehi
cle s
tatus
informati
on and indi
cators
exceeds the Zone of Eco driving, or
when the vehicle is stopped, the light
turns off.
Eco Driving Indicator Zone Dis-
play
Suggests the Zone of Eco driving with
current Eco driving ratio based on
acceleration.
Eco driving ratio based on
acceleration
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco
Driving Indicator Zone Display will illu-
minate.
At this time, the Eco Driving Indicator
Light will turn off.
Zone of Eco driving
Driving range
Displays driving range with remaining
fuel. Use the displayed values as a ref-
erence only.
This distance is computed based on
your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.
When only a small amount of fuel is
added to the tank, the display may not
be updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without
turning the engine switch off, the dis-
play may not be updated.
■
Eco Driving Indicator (if equipped)
Eco Driving Indicator will not operate
under the following conditions:
●
The shift lever is in any position other
than D.
●
A paddle shift switch is operated.
●
The driving mode is set to power
mode.
●
The vehicle speed is approximately
130 km/h (80 mph) or higher.
■
Driving support system infor-
mation
Select to display the operational
status of the following systems:
LTA (Lane Tracing Assist) (if
equipped) (
P.228)
Dynamic radar cruise control
with full-speed range (if
equipped) (
P.238)
Dynamic radar cruise control (if
equipped) (
P.250)
■
Navigation system-linked dis-
play (if equipped)
Select to display the following navi-
gation system-linked information:
Route guidance to destination (if
equipped)
Compass display (heading-up
display)
Select to enable selection of an
audio source or track on the meter
using the meter control switches.
This menu icon can be set to be dis-
played/not displayed in
.
Driving support system
information display
Audio system-linked dis-
play (if equipped)
98
n
2-1. Instrument cluster
■
Drive information
2 items that are selected using the
“Drive Info. Items” setting (average
speed, distance and total time) can
be displayed vertically.
The displayed information changes
according to the “Drive Info. Type”
setting (since the system was
started or between resets). (
P.98)
Use the displayed information as a ref-
erence only.
Following items will be displayed.
“Trip”
• “Average Speed”: Displays the aver-
age vehicle speed since engine start
*
• “Distance”: Displays the distance
driven since engine start
*
• “Total Time”: Displays the elapsed
time since engine start
*
*
: These items are reset each time the
engine stops.
“Total”
• “Average Speed”: Displays the aver-
age vehicle speed since the display
was reset
*
• “Distance”: Displays the distance
driven since the display was reset
*
• “Total Time”: Displays the elapsed
time since the display was reset
*
*
: To reset, display the desired item and
press and hold the
meter control
switch.
■
Tire inflation pressure
Displays inflation pressure of each
tire.
■
Meter display settings that can
be changed
Clock setting (vehicles without
navigation/multimedia system)
P.87
Language
Select to change the language dis-
played.
Units
Select to change the units of measure
displayed.
Eco Driving Indicator Light (if
equipped)
Select to enable/disable the Eco Driv-
ing Indicator Light.
• Fuel economy display
Select to change the average fuel con-
sumption display between after
start/after reset/after refuel. (
P.96)
(if equipped)
Select to display/not display the audio
system linked display.
Select to change the displayed content
of the following:
• Drive information type
Select to change the drive information
type display between after start/after
reset.
• Drive information items
Select to set the first and second items
Vehicle information display
Settings display
99
2
n
2-1. Instrument cluster
Vehi
cle s
tatus
informati
on and indi
cators
of the drive information display to any of
the following: average vehicle
speed/distance/elapsed time.
Pop-up display
Select to enable/disable pop-up dis-
plays for each relevant system.
Multi-information display off
Select to turn the multi-information dis-
play off.
To turn the multi-information display on
again, press any of the following meter
control switches
/
/
/
/
/
.
Default setting
Select to reset the meter display set-
tings to the default setting.
■
Vehicle functions and settings
that can be changed
P.457
■
Suspension of the settings display
●
Some settings cannot be changed
while driving. When changing set-
tings, park the vehicle in a safe place.
●
If a warning message is displayed,
operation of the settings display will
be suspended.
Stop & Start system operation
time (after start)/status notifica-
tion
Displays the current amount of time the
engine has been stopped by the opera-
tion of the Stop & Start system.
Also shows the status of the Stop &
Start system with a pop-up display.
(
P.270)
Stop & Start system settings
The length of time of the Stop & Start
system will operate when the “A/C”
switch of the air conditioning system is
on can be set to 2 different levels in
of the multi-information display.
(
P.270)
WARNING
■
Cautions during setting up the
display
If the engine is running when chang-
ing the display settings, ensure that
the vehicle is parked in a place with
adequate ventilation. In a closed area
such as a garage, exhaust gases
including harmful carbon monoxide
(CO) may collect and enter the vehi-
cle. This may lead to death or a seri-
ous health hazard.
NOTICE
■
During setting up the display
To prevent battery discharge, ensure
that the engine is running while set-
ting up the display features.
Stop & Start system infor-
mation (if equipped)
100
n
2-1. Instrument cluster
■
Display
Driving support system status
display area
Displays an image when the following
systems are operating and a menu icon
other than
is selected:
• LTA (Lane Tracing Assist) (if
equipped) (
P.228)
• Dynamic radar cruise control with full-
speed range (if equipped) (
P.238)
• Dynamic radar cruise control (if
equipped) (
P.250)
• RSA (Road Sign Assist) (if equipped)
(
P.263)
Content display area
By selecting menu icons on the multi-
information display, a variety of driving-
related information can be displayed.
The multi-information display can also
be used to change display settings and
other vehicle settings.
Warning or advice pop-up displays are
also displayed in certain situations.
■
Menu icons
The menu icons will be displayed
by pressing the
or
meter
control switch.
■
When the drive mode is changed
The speed meter display changes color
in accordance to the drive mode
selected. (
P.299)
■
Liquid crystal display
Small spots or light spots may appear
on the display. This phenomenon is
characteristic of liquid crystal displays,
and there is no problem continuing to
use the display.
Multi-information display
(7-inch display)
The multi-information display
is used to display fuel effi-
ciency related information and
various types of drivingrelated
information. The multi-informa-
tion display can also be used
to change the display settings
and other settings.
Display and menu icons
Driving information display
(
P.101)
Driving support system infor-
mation display (if equipped)
(
P.103)
Audio system-linked display
(if equipped) (
P.103)
Vehicle information display
(
P.103)
Settings display (
P.104)
Warning message display
(
P.413)
101
2
n
2-1. Instrument cluster
Vehi
cle s
tatus
informati
on and indi
cators
The multi-information display is
operated using the meter control
switches.
/
: Select menu icons
/
: Change displayed con-
tent, scroll up/down the screen
and move the cursor up/down
Press: Enter/Set
Press and hold: Reset/Display
customizable items
Return to the previous screen
Call sending/receiving and his-
tory display
Linked with the hands-free system,
sending or receiving call is displayed.
For details regarding the hands-free
system, refer to the “Navigation and
multimedia system Owner’s manual”.
■
Display items
Fuel economy
Eco Driving Indicator/Driving
range (if equipped)
■
Fuel economy
Use the displayed values as a refer-
ence only.
Driving range
Displays driving range with remaining
fuel.
This distance is computed based on
your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.
When only a small amount of fuel is
added to the tank, the display may not
be updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without
turning the engine switch off, the dis-
WARNING
■
Caution for use while driving
●
When operating the multi-informa-
tion display while driving, pay extra
attention to the safety of the area
around the vehicle.
●
Do not look continuously at the
multi-information display while driv-
ing as you may fail to see pedestri-
ans, objects on the road, etc.,
ahead of the vehicle.
■
The information display at low
temperatures
P.92
Changing the meter display
Content of driving informa-
tion
102
n
2-1. Instrument cluster
play may not be updated.
Current fuel consumption
Displays instantaneous current fuel
consumption.
Average fuel economy (after
reset)
To reset the average fuel economy dis-
play, press and hold the
meter
control switch.
The average fuel economy display
can be changed in
. (
P.104)
Average fuel economy (after
start)
Displays the average fuel consumption
since engine start.
Average fuel economy (after
refuel)
Displays the average fuel consumption
since the vehicle was refueled.
■
Eco Driving Indicator/Driving
range (if equipped)
Eco Driving Indicator
Eco Driving Indicator Light
During Eco-friendly acceleration (Eco
driving), the Eco Driving Indicator Light
will turn on. When the acceleration
exceeds the Zone of Eco driving, or
when the vehicle is stopped, the light
turns off.
Eco Driving Indicator Zone Dis-
play
Suggests the Zone of Eco driving with
current Eco driving ratio based on
acceleration.
Eco driving ratio based on
acceleration
If the acceleration exceeds the Zone of
Eco driving, the right side of the Eco
Driving Indicator Zone Display will illu-
minate.
At this time, the Eco Driving Indicator
Light will turn off.
Zone of Eco driving
Driving range
Displays driving range with remaining
fuel. Use the displayed values as a ref-
erence only.
This distance is computed based on
your average fuel consumption. As a
result, the actual distance that can be
driven may differ from that displayed.
When only a small amount of fuel is
added to the tank, the display may not
be updated.
When refueling, turn the engine switch
off. If the vehicle is refueled without
turning the engine switch off, the dis-
play may not be updated.
■
Eco Driving Indicator (if equipped)
Eco Driving Indicator will not operate
103
2
n
2-1. Instrument cluster
Vehi
cle s
tatus
informati
on and indi
cators
under the following conditions:
●
The shift lever is in any position other
than D.
●
A paddle shift switch is operated.
●
The driving mode is set to power
mode.
●
The vehicle speed is approximately
130 km/h (80 mph) or higher.
■
Driving support system infor-
mation
Select to display the operational
status of the following systems:
LTA (Lane Tracing Assist) (if
equipped) (
P.228)
Dynamic radar cruise control
with full-speed range (if
equipped) (
P.238)
Dynamic radar cruise control (if
equipped) (
P.250)
■
Navigation system-linked dis-
play (if equipped)
Select to display the following navi-
gation system-linked information:
Route guidance to destination (if
equipped)
Compass display (heading-up
display)
Select to enable selection of an
audio source or track on the meter
using the meter control switches.
This menu icon can be set to be dis-
played/not displayed in
.
■
Drive information
2 items that are selected using the
“Drive Info. Items” setting (average
speed, distance and total time) can
be displayed vertically.
The displayed information changes
according to the “Drive Info. Type”
setting (since the system was
started or between resets).
(
P.104)
Use the displayed information as a ref-
erence only.
Following items will be displayed.
“Trip”
• “Average Speed”: Displays the aver-
age vehicle speed since engine start
*
• “Distance”: Displays the distance
driven since engine start
*
• “Total Time”: Displays the elapsed
time since engine start
*
*
: These items are reset each time the
engine stops.
“Total”
• “Average Speed”: Displays the aver-
age vehicle speed since the display
was reset
*
• “Distance”: Displays the distance
driven since the display was reset
*
• “Total Time”: Displays the elapsed
time since the display was reset
*
*
: To reset, display the desired item and
Driving support system
information display
Audio system-linked dis-
play (if equipped)
Vehicle information display
104
n
2-1. Instrument cluster
press and hold the
meter control
switch.
■
Tire inflation pressure
Displays inflation pressure of each
tire.
■
Meter display settings that can
be changed
Clock setting (vehicles without
navigation/multimedia system)
P.93
Language
Select to change the language dis-
played.
Units
Select to change the units of measure
displayed.
Meter Type
The speed meter display method can
be changed.
Eco Driving Indicator Light (if
equipped)
Select to enable/disable the Eco Driv-
ing Indicator Light.
• Fuel economy display
Select to change the average fuel con-
sumption display between after
start/after reset/after refuel. (
P.101)
(if equipped)
Select to display/not display the audio
system linked display.
Select to change the displayed content
of the following:
• Drive information type
Select to change the drive information
type display between after start/after
reset.
• Drive information items
Select to set the first and second items
of the drive information display to any of
the following: average vehicle
speed/distance/elapsed time.
Pop-up display
Select to enable/disable pop-up dis-
plays for each relevant system.
Multi-information display off
Select to turn the multi-information dis-
play off.
To turn the multi-information display on
again, press any of the following meter
control switches
/
/
/
/
/
.
Default setting
Select to reset the meter display set-
tings to the default setting.
■
Vehicle functions and settings
that can be changed
P.457
■
Suspension of the settings display
●
Some settings cannot be changed
while driving. When changing set-
tings, park the vehicle in a safe place.
●
If a warning message is displayed,
operation of the settings display will
be suspended.
Settings display
105
2
n
2-1. Instrument cluster
Vehi
cle s
tatus
informati
on and indi
cators
Stop & Start system operation
time (after start)/status notifica-
tion
Displays the current amount of time the
engine has been stopped by the opera-
tion of the Stop & Start system.
Also shows the status of the Stop &
Start system with a pop-up display.
(
P.270)
Stop & Start system settings
The length of time of the Stop & Start
system will operate when the “A/C”
switch of the air conditioning system is
on can be set to 2 different levels in
of the multi-information display.
(
P.270)
WARNING
■
Cautions during setting up the
display
If the engine is running when chang-
ing the display settings, ensure that
the vehicle is parked in a place with
adequate ventilation. In a closed area
such as a garage, exhaust gases
including harmful carbon monoxide
(CO) may collect and enter the vehi-
cle. This may lead to death or a seri-
ous health hazard.
NOTICE
■
During setting up the display
To prevent battery discharge, ensure
that the engine is running while set-
ting up the display features.
Stop & Start system infor-
mation (if equipped)
106
n
2-1. Instrument cluster
*
: If equipped
Illustrations used in this text are intended as examples, and may differ from the
image that is actually displayed by the head-up display.
Driving support system status (if equipped)/navigation system-linked
display area (if equipped) (
P.108)
Shift position display (Multidrive)/Gear Shift Indicator (manual transmis-
sion)/RSA (Road Sign Assist) display area (if equipped) (
P.179, 185,
263)
Vehicle speed display
Tachometer/Eco Driving Indicator (if equipped)/Outside temperature dis-
play area (
P.109)
■
Head-up display will operate when
The engine switch is in ON.
■
When using the head-up display
The head-up display may seem dark or
hard to see when viewed through sun-
glasses, especially polarized sun-
glasses. Adjust the brightness of the
head-up display or remove your sun-
glasses.
Head-up display
*
The head-up display projects a variety of driving-related information
and the operating state of the driving support systems on the wind-
shield.
System components
107
2
n
2-1. Instrument cluster
Vehi
cle s
tatus
informati
on and indi
cators
■
Street name display (vehicles with
navigation system)
Only street names which are included in
the map data will be displayed.
Select
on the multi-information
display (
P.457) and then “HUD
Main”.
■
Enabling/disabling the head-
up display
Press the
meter control switch
to enable/disable the head-up dis-
play.
■
Changing the head-up display
settings
Press and hold the
meter con-
trol switch to change the following
settings:
Brightness and vertical position
of the head-up display
Select to adjust the brightness or verti-
cal position of the head-up display.
Display content
Select to change the display between
the following:
• No content
• Eco Driving Indicator (if equipped)
• Tachometer
Select to enable/disable the fol-
lowing items:
• Route guidance to destination (if
equipped)
• Driving support system display (if
equipped)
• Compass (heading-up display) (if
equipped)
• Audio system operation status (if
equipped)
WARNING
■
When using the head-up display
●
Check that the position and bright-
ness of the head-up display image
does not interfere with safe driving.
Incorrect adjustment of the image’s
position or brightness may obstruct
the driver’s view and lead to an
accident, resulting in death or seri-
ous injury.
●
Do not continuously look at the
head-up display while driving as
you may fail to see pedestrians,
objects on the road, etc., ahead of
the vehicle.
NOTICE
■
Head-up display projector
●
Do not place any drinks near the
head-up display projector. If the
projector gets wet, electrical mal-
functions may result.
●
Do not place anything on or put
stickers onto the head-up display
projector.
Doing so could interrupt head-up
display indications.
●
Do not touch the inside of the head-
up display projector or thrust sharp
edges or the like into the projector.
Doing so could cause mechanical
malfunctions.
Using the head-up display
108
n
2-1. Instrument cluster
Display angle
Select to adjust the angle of the head-
up display.
■
Enabling/disabling of the head-up
display
If the head-up display is disabled, it will
remain disabled when the engine switch
is turned off then back to ON.
■
Display brightness
The brightness of the head-up display
can be adjusted on
of the multi-
information display. Also, it is automati-
cally adjusted according to the ambient
brightness.
■
Driving support system status
display
Displays the operational status of
the following systems:
Dynamic radar cruise control
with full-speed range (if
equipped) (
P.238)
Dynamic radar cruise control (if
equipped) (
P.250)
LTA (Lane Tracing Assist) (if
equipped) (
P.228)
Details of content displayed on the
head-up display may differ from that
displayed on the multi-information dis-
play. For details, refer to the explana-
tion of each system.
■
Navigation system-linked dis-
play area (if equipped)
Displays the following items which
are linked to the navigation system:
Street name
Route guidance to destination (if
equipped)
Compass (heading-up display)
Pop-up displays for the following
systems will be displayed when
necessary:
■
Driving support systems
Displays a warning/sugges-
tion/advice message or the operat-
WARNING
■
Caution for changing settings of
the head-up display
If the engine is running when chang-
ing the display settings, ensure that
the vehicle is parked in a place with
adequate ventilation. In a closed area
such as a garage, exhaust gases
including harmful carbon monoxide
(CO) may collect and enter the vehi-
cle. This may lead to death or a seri-
ous health hazard.
NOTICE
■
When changing the settings of
the head-up display
To prevent battery discharge, ensure
that the engine is running while
changing the settings of the head-up
display.
Driving support system sta-
tus/navigation system-
linked display area
Pop-up display
109
2
n
2-1. Instrument cluster
Vehi
cle s
tatus
informati
on and indi
cators
ing state of a relevant system.
PCS (Pre-Collision System) (if
equipped) (
P.217)
LTA (Lane Tracing Assist) (if
equipped) (
P.228)
PKSB (Parking Support Brake)
(if equipped) (
P.289)
Brake Override System
(
P.160)
Drive-Start Control (if equipped)
(
P.165)
Details of content displayed on the
head-up display may differ from that
displayed on the multi-information dis-
play. For details, refer to the explana-
tion of each system.
■
icon
Displayed when a warning mes-
sage is displayed on the multi-infor-
mation display. (
P.413)
■
Warning message
Some warning messages are dis-
played when necessary, according
to certain conditions.
Details of content displayed on the
head-up display may differ from that
displayed on the multi-information dis-
play.
■
Audio system operation status
(if equipped)
Displayed when an audio remote
control switch on the steering wheel
is operated.
■
Hands-free system status (if
equipped)
Displayed when the hands-free
system is operated.
■
When a pop-up display is displayed
When a pop-up display is displayed, a
current display may no longer be dis-
played. In this case, the display will
return after the pop-up display disap-
pears.
■
Tachometer
Displays the engine speed in revo-
lutions per minute.
■
Eco Driving Indicator (if
equipped)
Eco Driving Indicator Zone Dis-
play
Eco driving ratio based on
acceleration
Zone of Eco driving
Displayed content is the same as that
displayed on the multi-information dis-
play (Eco Driving Indicator). For details,
refer to P.96, 102.
■
Outside temperature display
Displayed when the engine switch
Tachometer/Eco Driving
Indicator (if equipped)/Out-
side temperature display
110
n
2-1. Instrument cluster
is turned to ON or when the low
outside temperature indicator is
flashing.
■
Outside temperature display
●
When the ambient temperature is
approximately 3°C (37°F) or lower, the
low outside temperature indicator will
flash for approximately 10 seconds
and the outside temperature display
will turn off. In this case, the display
will be displayed again when the out-
side temperature becomes approxi-
mately 5°C (41°F) or higher.
●
In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change:
• When stopped, or driving at low
speeds (less than 25 km/h [16 mph])
• When the outside temperature has
changed suddenly (at the
entrance/exit of a garage, tunnel, etc.)
●
When “--” is displayed, the system
may be malfunctioning. Take your
vehicle to any authorized Toyota
retailer or Toyota authorized repairer,
or any reliable repairer.
*
: If equipped
■
Trip information
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
If a screen other than “Trip information”
is displayed, select “Trip information”.
Fuel consumption in the past 15
minutes
Current fuel consumption
Resetting the consumption data
Average vehicle speed since the
engine was started.
Elapsed time since the engine
was started.
Fuel consumption infor-
mation
*
Fuel consumption information
can be displayed on the multi-
media system screen.
Consumption (vehicles with
7-inch/8-inch display multi-
media system)
111
2
n
2-1. Instrument cluster
Vehi
cle s
tatus
informati
on and indi
cators
Cruising range
Average fuel consumption for the
past 15 minutes is divided by color
into past averages and averages
attained since the engine switch
was last turned to ON. Use the dis-
played average fuel consumption
as a reference.
The image is an example only, and may
vary slightly from actual conditions.
■
History
1
Press the “MENU” button.
2
Select “Info” on the “Menu”
screen.
If a screen other than “History” is dis-
played, select “History”.
Best recorded fuel consumption
Latest fuel consumption
Previous fuel consumption
record
Updating the latest fuel con-
sumption data
Resetting the history data
The average fuel consumption his-
tory is divided by color into past
averages and the average fuel con-
sumption since the last updated.
Use the displayed average fuel
consumption as a reference.
The image is an example only, and may
vary slightly from actual conditions.
■
Updating the history data
Update the latest fuel consumption by
selecting “Update” to measure the cur-
rent fuel consumption again.
■
Resetting the data
The fuel consumption data can be
deleted by selecting “Clear”.
■
Cruising range
Displays the estimated maximum dis-
tance that can be driven with the quan-
tity of fuel remaining.
This distance is computed based on
your average fuel consumption.
As a result, the actual distance that can
be driven may differ from that displayed.
■
Drive information
1
Press the “HOME” button.
2
Select “Vehicle” on the “Home”
screen.
If a screen other than “Drive informa-
tion” is displayed, select “Drive info”.
Consumption (vehicles with
9-inch display multimedia
system)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст