Toyota RAV4 (2022 year). Manual in english — page 5
81
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
by your Toyota dealer.
*6
:This light illuminates on the out-
side rear view mirrors.
*7
:When the outside temperature is
approximately 37°F (3°C) or
lower, the indicator will flash for
approximately 10 seconds, then
stay on.
*8
:This light illuminates on the cen-
ter panel.
■
BSM (Blind Spot Monitor) out-
side rear view mirror indicators
(if equipped)
In order to confirm operation, the
BSM outside rear view mirror indica-
tors illuminate in the following situa-
tions:
●
When the engine switch is turned
to ON while the BSM function is
enabled on the
screen of the
multi-information display.
●
When the BSM function is
enabled on the
screen of the
multi-information display while the
engine switch is in ON.
If the system is functioning correctly,
the BSM outside rear view mirror
indicators will turn off after a few
seconds.
If the BSM outside rear view mirror
indicators do not illuminate or do not
turn off, there may be a malfunction
in the system. If this occurs, have
the vehicle inspected by your
Toyota dealer.
82
2-1. Instrument cluster
The units used on the meter and display may differ depending on the target
region.
Tachometer
Displays the engine speed in revolutions per minute
Outside temperature (
Clock (
Multi-information display
Presents the driver with a variety of driving-related data (
Displays warning messages if a malfunction occurs (
Speedometer
Displays the vehicle speed
Fuel gauge
Displays the quantity of fuel remaining in the tank
Odometer and trip meter
Odometer:
Displays the total distance that the vehicle has been driven
Trip meter:
Displays the distance the vehicle has been driven since the meter was last
Gauges and meters (with 4.2-inch display)
The meters display various drive information.
Meter display
A
B
C
D
E
F
G
83
2-1. Instrument cluster
2
Vehicle
s
ta
tu
s information an
d in
dicat
or
s
reset. Trip meters “A” and “B” can be used to record and display different
distances independently.
Shift position and shift range indicator
Displays the selected shift position or selected shift range (
Engine coolant temperature gauge
Displays the engine coolant temperature
■
The meters and display illumi-
nate when
The engine switch is in ON.
■
Outside temperature display
●
In the following situations, the cor-
rect outside temperature may not
be displayed, or the display may
take longer than normal to
change.
• When stopped, or driving at low
speeds (less than 12 mph [20
km/h])
• When the outside temperature
has changed suddenly (at the
entrance/exit of a garage, tunnel,
etc.)
●
When “--” or “E” is displayed, the
system may be malfunctioning.
Take your vehicle to your Toyota
dealer.
●
Displays the outside temperature
within the range of -40°F (-40°C)
to 122°F (50°C).
●
When the outside temperature is
approximately 37°F (3°C) or
lower, the indicator
will flash
for approximately 10 seconds,
then stay on.
■
Liquid crystal display
H
I
WARNING
■
The information display at
low temperatures
Allow the interior of the vehicle to
warm up before using the liquid
crystal information display. At
extremely low temperatures, the
display monitor may respond
slowly, and display changes may
be delayed.
For example, there is a lag
between the driver’s shifting and
the new gear number appearing
on the display. This lag could
cause the driver to downshift
again, causing rapid and exces-
sive engine braking and possibly
an accident resulting in death or
injury.
NOTICE
■
To prevent damage to the
engine and its components
●
Do not let the indicator needle
of the tachometer enter the red
zone, which indicates the maxi-
mum engine speed.
●
The engine may be overheating
if the engine coolant tempera-
ture gauge is in the red zone
(“H”). In this case, immediately
stop the vehicle in a safe place,
and check the engine after it
has cooled completely.
(
84
2-1. Instrument cluster
Switches the items of the odom-
eter, trip meter A and trip meter
B by pressing the “ODO TRIP”
switch.
When the trip meter is dis-
played, pressing and holding the
switch will reset the trip meter.
The brightness of the instrument
panel lights can be adjusted by
turning the dial.
1
Brighter
2
Darker
■
Instrument panel brightness
adjustment
The instrument panel brightness
levels when the tail lights are on and
off can be adjusted individually.
However, when the surroundings
are bright (daytime, etc.), turning on
the tail lights will not change the
instrument panel brightness.
The clock can be adjusted on
the audio system screen.
Vehicles with Audio
Vehicles with Audio Plus or
Premium Audio
Refer to “NAVIGATION AND
MULTIMEDIA SYSTEM
OWNER’S MANUAL”.
Using the “ODO TRIP”
switch
Instrument panel light
control
Adjusting the clock
85
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
The display of the speedometer can be selected from two types,
analog or digital. (
Analog speedometer
The units used on the meter and display may differ depending on the target
region.
Tachometer
Displays the engine speed in revolutions per minute
Speedometer
Displays the vehicle speed
Clock (
Fuel gauge
Displays the quantity of fuel remaining in the tank
Engine coolant temperature gauge
Displays the engine coolant temperature
Odometer and trip meter
Odometer:
Displays the total distance that the vehicle has been driven
Trip meter:
Gauges and meters (with 7-inch display)
The meters display various drive information.
Meter display
A
B
C
D
E
F
86
2-1. Instrument cluster
Displays the distance the vehicle has been driven since the meter was last
reset. Trip meters “A” and “B” can be used to record and display different
distances independently.
Outside temperature (
Multi-information display
Presents the driver with a variety of driving-related data (
Displays warning messages if a malfunction occurs (
Shift position and shift range indicator
Displays the selected shift position or selected shift range (
Digital speedometer
The units used on the meter and display may differ depending on the target
region.
Tachometer
Displays the engine speed in revolutions per minute
Speedometer
Displays the vehicle speed
Clock (
Fuel gauge
Displays the quantity of fuel remaining in the tank
Engine coolant temperature gauge
Displays the engine coolant temperature
Odometer and trip meter
Odometer:
Displays the total distance that the vehicle has been driven
G
H
I
A
B
C
D
E
F
87
2-1. Instrument cluster
2
Vehicle
s
ta
tu
s information an
d in
dicat
or
s
Trip meter:
Displays the distance the vehicle has been driven since the meter was last
reset. Trip meters “A” and “B” can be used to record and display different
distances independently.
Outside temperature (
Multi-information display
Presents the driver with a variety of driving-related data (
Displays warning messages if a malfunction occurs (
Shift position and shift range indicator
Displays the selected shift position or selected shift range (
■
The meters and display illumi-
nate when
The engine switch is in ON.
■
When changing driving mode
●
Speedometer color is changed fol-
lowing the selected driving mode.
(
●
AWD models: Speedometer color
is changed following the selected
driving mode or Multi-terrain
Select mode. (
■
Outside temperature display
●
In the following situations, the cor-
rect outside temperature may not
be displayed, or the display may
take longer than normal to
change.
• When stopped, or driving at low
speeds (less than 12 mph [20
km/h])
• When the outside temperature
has changed suddenly (at the
entrance/exit of a garage, tunnel,
etc.)
●
When “--” or “E” is displayed, the
system may be malfunctioning.
Take your vehicle to your Toyota
dealer.
●
Displays the outside temperature
within the range of -40°F (-40°C)
to 122°F (50°C).
●
When the outside temperature is
approximately 37°F (3°C) or
lower, the indicator
will flash
for approximately 10 seconds,
then stay on.
■
Liquid crystal display
■
Customization
Settings (e. g. meter display) can be
changed on the
screen of the
multi-information display. (
G
H
I
WARNING
■
The information display at
low temperatures
Allow the interior of the vehicle to
warm up before using the liquid
crystal information display. At
extremely low temperatures, the
display monitor may respond
slowly, and display changes may
be delayed.
For example, there is a lag
between the driver’s shifting and
the new gear number appearing
on the display. This lag could
cause the driver to downshift
again, causing rapid and exces-
sive engine braking and possibly
an accident resulting in death or
injury.
88
2-1. Instrument cluster
Switches the items of the odom-
eter, trip meter A and trip meter
B by pressing the “ODO TRIP”
switch.
When the trip meter is dis-
played, pressing and holding the
switch will reset the trip meter.
The brightness of the instrument
panel lights can be adjusted by
turning the dial.
1
Brighter
2
Darker
■
Instrument panel brightness
adjustment
The instrument panel brightness
levels when the tail lights are on and
off can be adjusted individually.
However, when the surroundings
are bright (daytime, etc.), turning on
the tail lights will not change the
instrument panel brightness.
The clock can be adjusted on
the audio system screen.
Vehicles with Audio
Vehicles with Audio Plus or
Premium Audio
Refer to “NAVIGATION AND
MULTIMEDIA SYSTEM
OWNER’S MANUAL”.
NOTICE
■
To prevent damage to the
engine and its components
●
Do not let the indicator needle
of the tachometer enter the red
zone, which indicates the maxi-
mum engine speed.
●
The engine may be overheating
if the engine coolant tempera-
ture gauge is in the red zone
(“H”). In this case, immediately
stop the vehicle in a safe place,
and check the engine after it
has cooled completely.
(
Using the “ODO TRIP”
switch
Instrument panel light
control
Adjusting the clock
89
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
Following information is dis-
played on the multi-information
display.
■
Vehicles with 4.2-inch dis-
play
Driving support system infor-
mation
Displays recognized signs while the
RSA system (if equipped) is operat-
ing. (
Displays an image when the follow-
ing systems are operating and a
menu icon other than
is
selected:
• LTA (Lane Tracing Assist)
(
• Dynamic radar cruise control with
full-speed range (
Menu icons (
Information display area
A variety of information can be dis-
played by selecting a menu icon.
Additionally, warning or sugges-
tion/advice pop-up displays will be
displayed in some situations.
■
Vehicles with 7-inch display
Driving support system infor-
mation
Displays recognized signs while the
RSA system (if equipped) is operat-
ing. (
Displays an image when the follow-
ing systems are operating and a
menu icon other than
is
selected:
• LTA (Lane Tracing Assist)
(
• Dynamic radar cruise control with
full-speed range (
Information display area
A variety of information can be dis-
played by selecting a menu icon.
Additionally, warning or sugges-
tion/advice pop-up displays will be
displayed in some situations.
Menu icons (
Multi-information dis-
play
The multi-information dis-
play is used to display fuel
efficiency related informa-
tion and various types of
driving-related information.
The multi-information dis-
play can also be used to
change the display settings
and other settings.
Display contents
A
B
C
A
B
C
90
2-1. Instrument cluster
■
The multi-information display is
displayed when
The engine switch is in ON.
■
When changing driving mode
●
Background color of the multi-
information display is changed fol-
lowing the selected driving mode.
(
●
AWD models: Background color of
the multi-information display is
changed following the selected
driving mode or Multi-terrain
Select mode. (
■
Liquid crystal display
Small spots or light spots may
appear on the display. This phe-
nomenon is characteristic of liquid
crystal displays, and there is no
problem continuing to use the dis-
play.
The multi-information display is
operated using the meter control
switches.
Scroll the screen
*
/switch the
display
*
/move the cursor
Press: Enter/Set
Press and hold: Reset/Dis-
play customizable items
Return to the previous screen
Call sending/receiving and
history display (if equipped)
Linked with the hands-free
system, sending or receiving
call is displayed. For details
regarding the hands-free sys-
tem, refer to P.463(vehicles
with Audio) or “NAVIGA-
TION AND MULTIMEDIA
SYSTEM OWNER’S MAN-
UAL” (vehicles with Audio
Plus or Premium Audio).
*
: On screens where the screen can
be scrolled and the display can
be switched, a scroll bar or a
round icon that shows the num-
ber of registered screens is dis-
played.
Information related to each icon
can be displayed by selecting
the icon with the meter control
switches.
Some of the information may be
displayed automatically depending
on the situation.
Changing the display
A
B
C
WARNING
■
Caution for use while driving
For safety, avoid operating the
meter control switch while driving
as much as possible, and do not
look continuously at the multi-
information display while driving.
Stop the vehicle and operate the
meter control switch. Failure to do
so may cause a steering wheel
operation error, resulting in an
unexpected accident.
Menu icons
D
91
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
Select to display fuel consump-
tion data in various forms.
■
Speedometer display/Dis-
tance to empty (4.2-inch
display)
Speedometer display
Displays the vehicle speed.
Distance to empty
Displays the driving range with
remaining fuel. (
■
Fuel Economy
Following information is dis-
played.
Distance to empty
Displays the driving range with
remaining fuel. (
Current fuel economy
Displays the instantaneous current
fuel Economy.
Average fuel economy
Displays the average fuel economy
since the function was reset or the
average fuel economy after starting
or refueling.
*1, 2, 3
The average fuel economy selected
by “Fuel Economy” on the
screen is displayed. (
*1
:Use the displayed fuel consump-
tion as a reference only.
*2
:Average fuel economy since the
function was reset can be reset
by pressing and holding
.
*3
:Average fuel economy after
starting is reset each time the
engine stops.
Icon
Display
Driving information dis-
play (
Driving support system
information display
(
Audio system-linked dis-
play (if equipped)
(
Vehicle information dis-
play (
Settings display (
P.94)
Warning message dis-
play (
Driving information dis-
play
A
B
A
B
C
92
2-1. Instrument cluster
■
Eco Driving Indicator/Dis-
tance to empty
Display contents
Eco Driving Indicator
Distance to empty
Displays the driving range with
remaining fuel. (
Eco Driving Indicator
Eco Driving Indicator Light
During Eco-friendly acceleration
operation (Eco driving), the Eco
Driving Indicator Light will turn on.
When the acceleration exceeds
Zone of Eco driving, or when the
vehicle is stopped, the light turns
off.
Eco Driving Indicator Zone
Display
Suggests the Zone of Eco driving
with current Eco driving ratio based
on acceleration.
Eco driving ratio based on
acceleration
If the acceleration exceeds Zone of
Eco driving, the right side of Eco
Driving Indicator Zone Display will
illuminate.
At this time, the Eco Driving Indica-
tor Light will turn off.
Zone of Eco driving
■
Distance to empty
●
This distance is computed based
on your average fuel consump-
tion. As a result, the actual dis-
tance that can be driven may
differ from that displayed.
●
When only a small amount of fuel
is added to the tank, the display
may not be updated. When refuel-
ing, turn the engine switch to OFF.
If the vehicle is refueled without
turning the engine switch to OFF,
the display may not be updated.
●
When “Refuel” is displayed, the
remaining fuel amount is low and
the distance that can be driven
with the remaining fuel cannot be
calculated.
Refuel immediately.
■
The ECO Driving indicator will
not operate when
Eco Driving Indicator will not oper-
ate in the following conditions:
●
The shift lever is in any position
other than D.
●
Neither normal mode nor Eco
drive mode is selected.
●
The vehicle speed is approxi-
mately 80 mph (130 km/h) or
higher.
A
B
A
B
C
D
93
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
■
Driving support system
information display
Select to display the operational
status of the following systems:
LTA (Lane Tracing Assist)
(
Dynamic radar cruise control
with full-speed range
(
■
Navigation system-linked
display (if equipped)
Select to display the following
navigation system-linked infor-
mation.
Route guidance
Compass display
Select to enable selection of an
audio source or track on the dis-
play.
■
Drive information
2 items that are selected using
the “Drive Info Items” setting
(average speed, distance and
total time) can be displayed ver-
tically.
The displayed information
changes according to the “Drive
Info Type” setting (since the sys-
tem was started or between
resets). (
Use the displayed information as a
reference only.
Following items will be displayed.
“Trip”
• “Average Speed”: Displays the
average vehicle speed since
engine start
*
• “Distance”: Displays the distance
driven since engine start
*
• “Total Time”: Displays the
elapsed time since engine start
*
*
: These items are reset each time
the engine stops.
“Total”
• “Average Speed”: Displays the
average vehicle speed since the
display was reset
*
• “Distance”: Displays the distance
driven since the display was
reset
*
• “Total Time”: Displays the
elapsed time since the display
was reset
*
*
: To reset, display the desired item
and press and hold
.
Driving support system
information display
Audio system-linked dis-
play (if equipped)
Vehicle information dis-
play
94
2-1. Instrument cluster
■
AWD system display (AWD
models)
Torque distribution display
Displays the drive status of each
wheel in 6 steps from 0 to 5.
G-force display
*
Displays the size and direction of
the G-force applied to the vehicle
via changes to the position of the
ball on the display.
Maximum G-force course
*
This item is linked with the G-force
display and the course of the past
movement of the ball is displayed.
Press and hold
to reset the
record.
Wheel spin display
When a tire is spinning, its icon on
the display changes its color and
blinks.
*
: This item is displayed only when
driving mode is set to sport mode.
Vehicle settings and the content
displayed on the screen can be
changed by using the meter
control switches.
■
Setting procedure
1
Operate
or
of the
meter control switches and
select
.
2
Operate
or
of the
meter control switches and
select the desired item.
• If the function is turned on and
off or the volume, etc. is
changed on the setting
screen, the setting is changed
each time
is pressed.
• For functions that allow oper-
ation contents, display con-
tents, etc., of function to be
selected, the setting screen is
displayed by pressing and
holding
. When the setting
screen is displayed, select the
setting or desired value (time,
etc.) with
.
3
After changing the settings,
press
of the meter control
switches.
■
LTA (Lane Tracing
Assist) (
Select to set up the following
items.
“Lane Center”
Select to enable/disable the lane
centering function.
“Steering Assist”
Select to enable/disable steering
wheel assistance.
“Sensitivity”
Settings display
A
B
C
D
95
2-1. Instrument cluster
2
Vehicle
statu
s information an
d in
dicator
s
Select to set the lane departure
alert sensitivity.
“Sway Warning”
Select to enable/disable the vehicle
sway warning.
“Sway Sensitivity”
Select to set the vehicle sway warn-
ing sensitivity.
■
PCS (Pre-Collision Sys-
tem) (
Select to set up the following
items.
PCS on/off
Select to enable/disable the pre-
collision system.
“Sensitivity”
Select to change the pre-collision
warning timing.
■
BSM (Blind Spot Moni-
tor) (if equipped) (
Select to set up the following
items.
BSM (Blind Spot Monitor)
on/off
Select to enable/disable the BSM
system.
“Brightness”
Select to switch the brightness of
the outside rear view mirror indica-
tors. (
“Sensitivity”
Select to change the alert timing for
an approaching vehicle.
■
(Intuitive parking
assist) (if equipped)
(
Select to set up the following
items.
Intuitive parking assist on/off
Select to enable/disable the Intui-
tive parking assist.
“Volume”
Select to set the volume of the
buzzer which sounds when the
Intuitive parking assist is operated.
■
RCTA (Rear Cross Traffic
Alert) (if equipped)
(
RCTA (Rear Cross Traffic
Alert) on/off
Select to enable/disable the RCTA
system.
“Volume”
Select to change the RCTA buzzer
volume.
■
PKSB (Parking Sup-
port Brake System) (if
equipped) (
Select to enable/disable the
Parking Support Brake function.
■
RSA (Road Sign
Assist) (if equipped)
(
Select to set up the following
items.
Road Sign Assist on/off
Select to enable/disable the RSA
system.
96
2-1. Instrument cluster
“Notification method”
Select to change each notification
method used to notify the driver
when the system recognizes
excess speed and Do Not Enter
sign.
“Notification Level”
Select to change each notification
level used to notify the driver when
the system recognizes a speed limit
sign.
■
Vehicle Settings
PBD (Power Back Door)
(if equipped) (
Select to set up the following items.
• System settings
Select to enable/disable the power
back door system.
• “Hands Free”
*
Select to enable/disable the Hands
Free Power Back Door.
• “Opening Adjustment”
Select the open position when
power back door is fully open.
• “Volume”
Select to set the volume of the
buzzer which sounds when the
power back door system operates.
*
: Vehicles with Hands Free Power
Back Door
(Stop & Start system) (if
equipped) (
Select to set the length of time the
Stop & Start system will operate
when the “A/C” switch of the air
conditioning system is on.
“TPWS” (Tire Pressure Warn-
ing System) (if equipped)
(
• “Set Pressure”
Select to initialize the tire pressure
warning system.
• “Change Wheel”
Select to register the ID codes of
the tire pressure sensors to the tire
pressure warning system.
“Rear Seat Reminder”
(
Select to enable/disable the rear
seat reminder function.
“Scheduled Maintenance”
(
Select to reset the scheduled main-
tenance information (message indi-
cating maintenance is required and
distance until the next mainte-
nance) after all maintenance is per-
formed.
■
Settings
“Language”
Select to change the language on
the multi-information display.
“Units”
Select to change the units of mea-
sure displayed.
“Meter Type” (7-inch display)
Select to change the speedometer
display.
(Eco Driving Indicator
Light) (
Select to activate/deactivate the
Eco Driving Indicator Light.
(Driving information dis-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст