Toyota Prius Prime (2022 year). Manual in english — page 12
193
3
Instrument clus
The meter control switches equipped on the steering wheel can be
used to switch the screen display and change settings related to func-
tions displayed on the screen.
Each time the button is
pressed, the mileage display
switches among odometer, trip
meters, etc., and the fuel con-
sumption information for each
distance switches as well.
(
Pressing
,
,
or
performs such operations as
scrolling the screen
*
, switching
the contents of the display
*
and
moving the cursor.
This button is used to perform such operations as selecting the cur-
rent item or switching between on and off.
When pressed, the display returns to the previous screen.
*
: On screens where the screen can be scrolled and the display can be
switched, marks are displayed to indicate the direction of operation (such
as
and
).
Operations related to the combination meter
1
2
3
4
194
When the switches are pressed, the instrument cluster light changes
as follows.
The instrument cluster brightness levels that can be selected differ
depending on whether the tail lights are on and surrounding brightness lev-
els. (
Darker
Brighter
When the switches are pressed,
the adjustment level check screen
(pop-up display
*
) is displayed on
the main display.
When the instrument cluster light is
adjusted, the brightness of the
instrument
panel
light
also
changes.
*
: A short time after the operation is completed, the pop-up display turns off.
Furthermore, the pop-up display can be turned on and off in the “Meter
Customize” settings. (
Instrument cluster light control
1
2
195
3
Instrument clus
Some information will be displayed automatically according to power
switch operation, vehicle condition, etc.
■
When starting the hybrid system
When the hybrid system starts,
an opening animation is dis-
played on the main display.
After the animation ends, the
screens switch to the normal
screen.
The opening animation will be
stopped in any of the following
situations.
• When the shift position is changed to other than P
• When the Simple Advanced Parking Guidance System (if equipped)
is turned on
■
When the driving assist systems are operating
When using driving assist systems such as the dynamic radar
cruise control with full-speed range (
P. 409) and LTA (Lane Trac-
ing Assist) (
P. 390), information related to each system is auto-
matically displayed on the multi-information display depending on
the situation.
For details regarding the displayed information and the contents of the
display, refer to the explanation page of each system.
■
When there is information to be notified about the vehicle
When a shift position is mistakenly selected or a problem occurs in
a vehicle system, a warning message (or image) is displayed on
the multi-information display.
When a warning message is displayed, follow the instructions displayed
on the display. (
Information automatically displayed
196
■
When stopping the hybrid system
●
When the hybrid system is stopped, the “Ending” screen is dis-
played on the multi-information display (for approximately 30
seconds
*
1
).
While the “Ending” screen is displayed, the following information
can be displayed by pressing
,
,
or
of the meter
control switches.
Score for each Eco score items (
Eco score result and advice
Driving time since the hybrid system started
Distance traveled since the hybrid system started
Average fuel consumption after the hybrid system started
Information for next charge schedule
*
2
On/off setting for “Charge Now” (
The setting can be switched each time
is pressed.
*
1
: The screen will be turned off immediately if the doors are locked.
*
2
: It can be displayed when the charge schedules are registered.
(
●
A check screen for “Traction Battery Cooler” may be displayed
when the hybrid system is stopped. (
1
2
3
4
5
6
7
197
3
Instrument clus
To adjust the time, perform operations on the
screen (
of the multi-information display.
■
Adjusting the time
Press
or
of the meter control switches on the steering
wheel and select
.
Press
or
of the meter control switches and select
.
Press
to display the cursor.
Press
or
of the
meter control switches to
adjust the cursor position,
and then press
or
to
change the setting.
When the 12-hour display is
selected, “12H” is displayed,
and when the 24-hour display is
selected, “24H” is displayed.
When adjusting minutes, operation automatically starts from 00 sec-
onds.
After changing the settings, press
to return to the previous screen.
Clock adjustment
1
2
3
4
198
■
Resetting the minutes display
Press
or
of the meter control switches on the steering
wheel and select
.
Press
or
of the
meter control switches and
select
.
Press
.
The minutes display switches to “00”.
*
*
: e.g. 1:00 to 1:29
1:00
1:30 to 1:59
2:00
1
2
3
199
3
Instrument clus
■
The meters and display illuminate when
The power switch is in ON mode.
■
Adjusting the instrument cluster brightness (
●
The brightness levels that can be selected differ depending on whether the
tail lights are on and surrounding brightness levels, as shown in the table
below.
*
: 22 levels of the brightness are displayed on the setting screen. However,
the brightness setting will be the brightest when other than 1st level (the
darkest) is selected. If other than 1st or 22nd level is selected, when the
tail lights are turned on in a dark place, the instrument cluster brightness
setting will be the selected level.
●
If the taillights are illuminated in a dark environment, the instrument cluster
light dims. However, when the brightness of the instrument cluster is set to
minimum or maximum (1st or 22nd level of the instrument cluster bright-
ness), even if the taillights are illuminated, the instrument cluster light will
not dim.
■
When disconnecting and reconnecting 12-volt battery terminals
The settings of the clock will be reset.
■
Calendar setting
●
Until the calendar setting is completed, the check screen is displayed every
time the power switch is turned to ON mode.
●
After the calendar information is set, it can be changed in the “Meter Cus-
tomize” settings. (
The tail lights are off
The tail lights are on
In a bright place
2 levels
*
2 levels
*
In a dark place
22 levels
If calendar recording is interrupted due to
replacement of the 12-volt battery or 12-
volt battery discharge, etc., when the
power switch is turned to ON mode after
maintenance, the calendar setting check
screen is automatically displayed on the
multi-information display.
●
If date information is not set, the electric-
ity and fuel consumption record cannot
be stored correctly. Also, the charging
schedule function can not operate prop-
erly. When the calendar setting check
screen is displayed, make sure to com-
plete the calendar setting. (
200
■
When the menu screen on the navigation system is operated (vehicles
with 11.6-inch display)
■
Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
■
Pop-up display
Some functions, such as the driving mode select switch and air conditioning
system, are operation-linked and display pop-up screens on the multi-infor-
mation display. If the pop-up screens of these functions are not desired, they
can be turned off in the “Meter Customize” settings. (
A pop-up display of the menu screen icon
is displayed on the multi-information dis-
play.
*
*
: The pop-up display on the navigation
system can be turned off in the “Meter
Customize” settings. (
WARNING
■
To prevent an accident
■
Caution for use while driving
For safety, avoid operating the meter control switch while driving as much
as possible, and do not look continuously at the multi-information display
while driving. Stop the vehicle and operate the meter control switch. Failure
to do so may cause a steering wheel operation error, resulting in an unex-
pected accident.
NOTICE
■
The information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal
information display. At extremely low temperatures, the information display
monitor may respond slowly, and display changes may be delayed.
Do not place anything or attach a sticker
in front of the instrument cluster. The item
may obscure or obstruct the display, or
could reflect off the display, possibly
causing an accident.
201
3
Instrument clus
Warning lights and indicators
The warning lights and indicators inform the driver of the status
of the vehicle’s various systems.
For the purpose of explanation, the following illustration dis-
plays all indicators and warning lights illuminated.
202
Warning lights inform the driver of malfunctions in any of the vehicle’s
systems.
Warning lights
Warning lights
Pages
*
1
Brake system warning light (U.S.A.)
*
1
Brake system warning light (Canada)
(Red)
*
1
Brake system warning light
(Yellow)
*
1
Charging system warning light
*
1
Low engine oil pressure warning light
*
1
Malfunction indicator lamp (U.S.A.)
*
1
Malfunction indicator lamp (Canada)
*
1
SRS warning light
*
1
ABS warning light (U.S.A.)
*
1
ABS warning light (Canada)
*
1
Electric power steering system warning light
(Red/yellow)
*
1, 2
PCS warning light
LTA indicator (Orange)
*
1
Slip indicator light
203
3
Instrument clus
*
1
: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or turn off. Have the vehicle
inspected by your Toyota dealer.
*
2
: The light flashes or illuminates to indicate a malfunction.
*
3
: The light flashes to indicate a malfunction.
*
1
High coolant temperature warning light
*
1, 3
PKSB OFF indicator (if equipped)
Open door warning light
Low fuel level warning light
Driver’s and front passenger’s seat belt
reminder light
Rear passengers’ seat belt reminder light
(U.S.A.)
Rear passengers’ seat belt reminder light
(Canada)
*
1
Master warning light
*
1
Tire pressure warning light
Warning lights
Pages
204
The indicators inform the driver of the operating state of the vehicle’s
various systems.
Indicators
Indicators
Pages
Turn signal indicator
Headlight indicator (U.S.A.)
Tail light indicator (Canada)
Parking brake indicator (U.S.A.)
Parking brake indicator (Canada)
Headlight high beam indicator
Fog light indicator (if equipped)
Security indicator
“READY” indicator
Shift position indicators
*
1, 2
Slip indicator light
*
1, 3
VSC OFF indicator
Cruise control indicator
Dynamic radar cruise control indicator
205
3
Instrument clus
*
1
: These lights turn on when the power switch is turned to ON mode to indi-
cate that a system check is being performed. They will turn off after the
hybrid system is on, or after a few seconds. There may be a malfunction in
a system if a light does not come on, or turn off. Have the vehicle
inspected by your Toyota dealer.
*
2
: The light flashes to indicate that the system is operating.
*
3
: The light comes on when the system is turned off.
*
4
: Depending on the operating condition, the color and illuminating/flashing
state of the light change.
Cruise control “SET” indicator
*
1, 3
PCS warning light
*
4
LTA indicator
Steering control indicator
Automatic High Beam indicator
Heated steering wheel indicator (if equipped)
“BSM” indicator (if equipped)
Intuitive parking assist indicator (if equipped)
*
1, 3
PKSB OFF indicator (if equipped)
*
1
S-APGS indicator (if equipped)
*
1
“AIR BAG ON/OFF” indicator (U.S.A.)
*
1
“AIR BAG ON/OFF” indicator (Canada)
Indicators
Pages
206
■
Main display and multi-information display
*
1
: The displayed indicator changes according to the current plug-in hybrid
system operation mode.
*
2
: The displayed indicator changes according to the current driving mode.
Indicators and symbols displayed on the display
Indicators
Pages
*
1
EV drive mode indicator
*
1
EV auto mode indicator
*
1
Hybrid battery charge mode indicator
*
2
“ECO MODE” indicator
*
2
“PWR MODE” indicator
EV indicator
207
3
Instrument clus
■
Multi-information display (symbol display
*
)
*
: These symbols are displayed along with a message. Also, the symbol dis-
plays listed here are only an example, and different symbols may be dis-
played according to the contents of the multi-information display.
Symbol display
Pages
Smart key system
Inappropriate pedal operation
LTA (Lane Tracing Assist)
Low engine oil pressure warning
(Canada only)
208
■
BSM (Blind Spot Monitor) outside rear view mirror indicators
(if equipped) (
• When the BSM function is enabled on the
screen of the multi-infor-
mation display, the power switch is turned to ON mode.
If the system is functioning correctly, the BSM outside rear view mirror indi-
cators will turn off after a few seconds.
If the BSM outside rear view mirror indicators do not illuminate or do not
turn off, there may be a malfunction in the system.
If this occurs, have the vehicle inspected by your Toyota dealer.
●
Indicators are also displayed on the out-
side rear view mirrors.
●
In order to confirm operation, the BSM
outside rear view mirror indicators illumi-
nate in the following situations:
• When the power switch is in ON
mode, the BSM function is enabled
on the
screen of the multi-infor-
mation display.
WARNING
■
If a safety system warning light does not come on
Should a safety system light such as the ABS and SRS warning light not
come on when you start the hybrid system, this could mean that these sys-
tems are not available to help protect you in an accident, which could result
in death or serious injury. Have the vehicle inspected by your Toyota dealer
immediately if this occurs.
NOTICE
■
To prevent damage to the engine and its components
The engine may be overheating if the high coolant temperature warning
light comes on or flashes. In this case, immediately stop the vehicle in a
safe place, and check the engine after it has cooled completely. (
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст