Toyota Tundra. Manual — part 2175

3. REMOVE NO. 1 ENGINE UNDER COVER (See REMOVAL )

4. DRAIN ENGINE COOLANT (See REPLACEMENT )

5. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY

a. Remove the front wiper motor and link (see REMOVAL ).

6. REMOVE FRONT COWL TOP OUTER PANEL SUB-ASSEMBLY

a. Disconnect the 2 washer hoses.

b. Remove the 7 bolts and front cowl top outer panel.

Fig. 13: Identifying Bolts On Front Cowl Top Outer Panel
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

7. REMOVE V-BANK COVER

a. Remove the 2 nuts and V-bank cover.

Fig. 14: Identifying V-Bank Cover
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

8. REMOVE NO. 2 AIR CLEANER HOSE (see REMOVAL )

9. REMOVE AIR CLEANER ASSEMBLY WITH ELEMENT

a. Disconnect the No. 2 ventilation hose.

INITIALIZATION ).

2009 Toyota Tundra

2009 ENGINE Intake (1GR-FE) - Tundra

Fig. 15: Identifying No. 2 Ventilation Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Detach the hose clamp.

c. Disconnect the vacuum hose.

d. Disconnect the MAF meter connector.

Fig. 16: Identifying MAF Meter Connector And Vacuum Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

e. Using a clip remover, detach the 2 wire harness clamps.

f. Loosen the hose clamp.

g. Remove the 2 bolts and air cleaner with element.

2009 Toyota Tundra

2009 ENGINE Intake (1GR-FE) - Tundra

Fig. 17: Identifying Air Cleaner With Element
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

10. REMOVE INTAKE AIR SURGE TANK

a. Disconnect the throttle position sensor and throttle control motor connector.

Fig. 18: Identifying Throttle Position Sensor And Throttle Control Motor Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Disconnect the No. 4 water by-pass hose.

c. Disconnect the No. 5 water by-pass hose.

d. Disconnect the purge line hose.

2009 Toyota Tundra

2009 ENGINE Intake (1GR-FE) - Tundra

Fig. 19: Identifying Purge Line Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

e. Disconnect the purge VSV connector.

f. Disconnect the union to check valve hose.

g. Disconnect the No. 1 ventilation hose.

Fig. 20: Identifying No. 1 Ventilation Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

h. Disconnect the vacuum switching valve (for ACIS) connector.

2009 Toyota Tundra

2009 ENGINE Intake (1GR-FE) - Tundra