Toyota Tundra. Manual — part 153
Fig. 45: Identifying M8 Speaker Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
6. INSPECT FRONT NO. 4 SPEAKER
a. Disconnect the K14 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE FRONT NO. 4 SPEAKER (see REMOVAL )
Fig. 46: Identifying K14 Speaker Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: REPLACE BOX SPEAKER (see REMOVAL )
7. CHECK HARNESS AND CONNECTOR (STEREO COMPONENT AMPLIFIER - SPEAKER)
a. Disconnect the K16 amplifier connector.
b. Disconnect the K10 and K12 speaker connectors.
c. Measure the resistance according to the value(s) in the table below.
Tester Connection Condition Specified Condition
1 - 2
Always
1.5 to 2.1 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
Fig. 47: Checking Harness And Connector (Stereo Component Amplifier - Speaker)
NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
OK: Go to Next Step
8. INSPECT FRONT NO. 3 SPEAKER LH
a. Disconnect the N1 speaker connector.
Tester Connection
Condition Specified Condition
K16-8 (FL+) - Body ground
Always
10 kohms or higher
K16-7(FL-) - Body ground
K16-2(FR+) - Body ground
K16-6(FR-) - Body ground
K16-3(RL+) - Body ground
K16-9(RL-) - Body ground
K16-10 (RR+) - Body ground
K16-4(RR-) - Body ground
K10-1 (+) - Body ground
K10-2(-)- Body ground
K12-1(+) - Body ground
K12-2 (-) - Body ground
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE FRONT NO. 3 SPEAKER LH (see REMOVAL )
Fig. 48: Identifying Front No.3 Speaker LH Harness
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
9. INSPECT FRONT NO. 3 SPEAKER RH
a. Disconnect the M1 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE FRONT NO. 3 SPEAKER RH (see REMOVAL )
Fig. 49: Identifying Front No.3 Speaker LH Harness
Tester Connection Condition Specified Condition
1 - 3
Always
2.5 to 3.5 ohms
Tester Connection Condition Specified Condition
1 - 3
Always
2.5 to 3.5 ohms
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
10. INSPECT FRONT NO. 2 SPEAKER LH
a. Disconnect the K12 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
NG: REPLACE FRONT NO. 2 SPEAKER LH (see REMOVAL )
Fig. 50: Identifying Front No. 2 Speaker LH Connector Terminals
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
OK: Go to Next Step
11. INSPECT FRONT NO. 2 SPEAKER RH
a. Disconnect the K10 speaker connector.
b. Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION
Tester Connection Condition Specified Condition
3(TWL+) - 4(TWL-) Always
1.3 to 2.3 ohms
1 (+) - 3 (TWL+)
Always
Below 1 ohms
2(-) - 4(TWL-)
Tester Connection Condition Specified Condition
3(TWR+) - 4(TWR-) Always
1.3 to 2.3 ohms
1 (+) - 3 (TWR+)
Always
Below 1 ohms
2 (-) - 4 (TWR-)
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Audio/Visual - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст