Toyota Tundra. Manual — part 2181
b. Install the purge line hose.
Fig. 51: Identifying Purge Line Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. INSTALL AIR CLEANER CASE SUB-ASSEMBLY
a. Install the air cleaner case with the 2 bolts.
b. Tighten the hose clamp.
2009 Toyota Tundra
2009 ENGINE Intake (1GR-FE) - Tundra
HINT:
Tighten the hose clamp until it reaches the specified protrusion height labeled A shown in the
illustration.
Standard protrusion height: Below 0.5 mm (0.0197 in.)
Fig. 52: Identifying Hose Clamp
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Attach the 2 wire harness clamps.
d. Connect the MAF meter connector.
2009 Toyota Tundra
2009 ENGINE Intake (1GR-FE) - Tundra
Fig. 53: Identifying MAF Meter Connector
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e. Connect the vacuum hose.
f. Attach the hose clamp.
g. Connect the No. 2 ventilation hose.
2009 Toyota Tundra
2009 ENGINE Intake (1GR-FE) - Tundra
Fig. 54: Identifying No. 2 Ventilation Hose
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
3. INSTALL AIR CLEANER ELEMENT
4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY
2009 Toyota Tundra
2009 ENGINE Intake (1GR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст