Toyota Tundra. Manual — part 2255

Fig. 381: Identifying Spark Plug Tube Gasket Cut Off Area
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. Using the removed gasket and a hammer, tap in a new gasket until it stops.

HINT:

If the removed gasket does not fit on the new one, correct the removed one with pliers.

Fig. 382: Installing Spark Plug Tube Gasket
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

c. Apply a light coat of MP grease to the gasket lip.

d. Return the 4 ventilation baffle plate claws to the original positions.

43. INSTALL OIL CONTROL VALVE FILTER

a. LH:

1. Install the valve filter in the cylinder head cover.

2. Install a new gasket and the cylinder head cover spacer with the 3 bolts.

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra

Fig. 383: Locating Cylinder Head Cover Spacer With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. RH:

1. Install the valve filter in the cylinder head cover.

2. Install a new gasket and the cylinder head cover spacer with the 3 bolts.

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)

Fig. 384: Locating Cylinder Head Cover Spacer With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra

44. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY RH (See INSTALLATION )

45. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY LH (See INSTALLATION )

46. INSTALL CAMSHAFT OIL CONTROL VALVE ASSEMBLY

a. LH:

1. Apply a light coat of engine oil to 2 new O-rings.

2. Install the 2 O-rings to the 2 oil control valves.

3. Install the 2 oil control valves with the 2 bolts.

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)

Fig. 385: Locating LH Camshaft Oil Control Valve Assembly Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

b. RH:

1. Apply a light coat of engine oil to 2 new O-rings.

2. Install the 2 O-rings to the 2 oil control valves.

3. Install the 2 oil control valves with the 2 bolts.

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)

Fig. 386: Locating Oil Control Valves With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

47. INSTALL CRANKSHAFT POSITION SENSOR

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra

a. Install the crankshaft position sensor with the bolt.

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)

Fig. 387: Locating Crankshaft Position Sensor Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

48. INSTALL CRANK POSITION SENSOR PROTECTOR

a. Install the sensor protector with the 2 bolts.

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)

Fig. 388: Locating Sensor Protector With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

49. INSTALL CAMSHAFT POSITION SENSOR

a. Install the camshaft position sensor with the bolt.

Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)

2009 Toyota Tundra

2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra