Toyota Tundra. Manual — part 839
Fig. 101: Identifying Rear Bumper Pad Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Detach the 14 clips and remove the rear bumper pad.
HINT:
Detach the clips from the backside of the rear bumper.
5. REMOVE REAR BUMPER PLATE LH
a. Detach the 4 clips and remove the rear bumper plate.
Fig. 102: Identifying Rear Bumper Plate Clips And Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
HINT:
Detach the clips from the backside of the rear bumper.
6. REMOVE REAR BUMPER PLATE RH
HINT:
Use the same procedures described for the LH side.
7. REMOVE REAR BUMPER BAR
a. w/ Intuitive Parking Assist System:
Disconnect the connectors and clamps shown in the illustration.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Fig. 103: Identifying Connectors And Clamps
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the 4 bolts and 2 bumper bar reinforcements.
c. Remove the 6 bolts and bumper bar.
Fig. 104: Identifying Bumper Bar Reinforcements Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
8. REMOVE NO. 3 WIRE FRAME (w/ Trailer Towing System)
Fig. 105: Identifying No. 3 Wire Frame Clamps And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
a. for 4 Pin Type:
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Remove the No. 3 wire frame.
1. Disconnect the connector.
2. Detach the 2 clamps.
3. Remove the 2 bolts and wire frame.
b. for 4 Pin and 7 Pin Type:
Fig. 106: Identifying Bolts And Wire Frame
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Remove the No. 3 wire frame.
1. Disconnect the connector.
2. Detach the 2 clamps.
3. Remove the 2 bolts and wire frame.
DISASSEMBLY
1. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) (See REMOVAL )
2. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) (See
REMOVAL )
3. REMOVE NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) (See REMOVAL )
4. REMOVE NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) (See
REMOVAL )
REASSEMBLY
1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) (See
INSTALLATION )
2. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) (See
INSTALLATION )
3. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) (See
INSTALLATION )
4. INSTALL NO. 2 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) (See
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
INSTALLATION )
INSTALLATION
1. INSTALL NO. 3 WIRE FRAME (w/ Trailer Towing System)
Fig. 107: Identifying Wire Frame With Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
a. for 4 Pin Type:
Install the No. 3 wire frame.
1. Install the wire frame with the 2 bolts.
Torque: 8.3 N*m (85 kgf*cm, 73 in.*lbf)
2. Attach the 2 clamps.
3. Connect the connector.
b. for 4 Pin and 7 Pin Type:
Fig. 108: Identifying Bolts And Wire Frame
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Install the No. 3 wire frame.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст