Toyota Tundra. Manual — part 1963
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
46
REMOVE VENTILATION PIPE GASKET
a
Using a screwdriver, pry out the ventilation pipe gasket
HINT:
Tape the screwdriver tip before use
Fig. 279: Removing Ventilation Pipe Gasket
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
47
REMOVE NO. 1 HEAT EXCHANGER COVER
a
Remove the 12 bolts and 2 nuts
Fig. 280: Locating No. 1 Heat Exchanger Cover Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Remove the heat exchanger by prying between the heat exchanger and cylinder block with a
screwdriver
HINT:
Tape the screwdriver tip before use
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Fig. 281: Removing Heat Exchanger
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
48
REMOVE NO. 2 OIL PAN SUB-ASSEMBLY
a
Remove the 14 bolts and 2 nuts
Fig. 282: Locating No. 2 Oil Pan Sub-Assembly Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Insert the blade of oil pan seal cutter between the oil pans Cut through the applied sealer and
remove the No 2 oil pan
Fig. 283: Inserting Blade Of Oil Pan Seal Cutter Between Crankcase And Oil Pan
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
49
REMOVE NO. 1 OIL PAN SUB-ASSEMBLY
NOTE:
Be careful not to damage the contact surfaces of the oil pans.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
a
Remove the 14 bolts and 2 nuts
HINT:
Be sure to clean the bolts and stud bolts, and check the threads for cracks or other damage
Fig. 284: Identifying No. 1 Oil Pan Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Remove the oil pan by prying between the oil pan and cylinder block with a screwdriver
HINT:
Tape the screwdriver tip before use
NOTE:
Be careful not to damage the contact surfaces of the cylinder block
and oil pan.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Fig. 285: Identifying Oil Pan
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
50
REMOVE NO. 1 OIL PAN BAFFLE PLATE
a
Remove the 7 bolts and baffle plate
Fig. 286: Locating No. 1 Oil Pan Baffle Plate Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
51
REMOVE OIL STRAINER SUB-ASSEMBLY
a
Remove the 2 bolts, oil strainer and O-ring
Fig. 287: Locating Oil Strainer Sub-Assembly Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
52
REMOVE ENGINE REAR OIL SEAL RETAINER
a
Remove the 6 bolts and oil seal retainer
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FBE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст