Toyota Tundra. Manual — part 828
b. w/ Intuitive Parking Assist System:
Connect the ultrasonic sensor connectors.
c. Attach the 4 claws to install the bumper cover.
Fig. 28: Identifying Bumper Cover Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d. Install the 9 screws and 8 clips.
Fig. 29: Identifying Bumper Cover Screws And Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
Torque: for labeled A
3.4 N*m (35 kgf*cm, 30 in.*lbf)
for labeled B
5.4 N*m (55 kgf*cm, 48 in.*lbf)
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
e. Install the 2 clips.
Fig. 30: Identifying Pin Hold Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
HINT:
Use the same procedures for the RH side and LH side.
f. Install the 2 pin hold clips so that their grooves are vertical.
HINT:
Use the same procedures for the RH side and LH side.
10. INSTALL FRONT END PANEL LH
a. Attach the 2 pins to install the panel.
Fig. 31: Identifying Front End Panel LH Clips And Pins
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Install the 2 clips.
11. INSTALL FRONT END PANEL RH
HINT:
Use the same procedures described for the LH side.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
FRONT BUMPER (FOR STEEL TYPE BUMPER)
COMPONENTS
NOTE:
Some systems need to be initialized after the cable is reconnected (see
INITIALIZATION ).
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Fig. 32: Identifying Front Bumper Replacement Components With Torque Specifications - For Steel
Type Bumper (1 Of 6)
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст