Toyota Tundra. Manual — part 826
Use the same procedures described for the LH side.
DISASSEMBLY
1. REMOVE FRONT BUMPER HOLE COVER LH (w/o Fog Light)
a. Remove the 2 screws.
Fig. 13: Identifying Front Bumper Hole Cover LH Screws And Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Detach the 3 claws and remove the hole cover.
2. REMOVE FRONT BUMPER HOLE COVER RH (w/o Fog Light)
HINT:
Use the same procedures described for the LH side.
3. REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
a. Detach the 2 claws and remove the fog light.
Fig. 14: Identifying Fog Light Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4. REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
HINT:
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Use the same procedures described for the LH side.
5. REMOVE FOG LIGHT MOUNTING BRACKET LH (w/ Fog Light)
a. Remove the 2 screws.
b. Detach the 3 claws and remove the bracket.
6. REMOVE FOG LIGHT MOUNTING BRACKET RH (w/ Fog Light)
Fig. 15: Identifying Fog Light Mounting Bracket RH Screws And Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
HINT:
Use the same procedures described for the LH side.
7. REMOVE FRONT VALANCE PANEL
a. Remove the 10 bolts, 2 nuts and panel.
Fig. 16: Identifying Front Valance Panel Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
8. REMOVE FRONT FENDER LINER BRACKET LH
a. Detach the 2 claws and remove the bracket.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Fig. 17: Identifying Front Fender Liner Bracket LH Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
9. REMOVE FRONT FENDER LINER BRACKET RH
HINT:
Use the same procedures described for the LH side.
10. REMOVE NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) (See REMOVAL )
11. REMOVE NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) (See
REMOVAL )
REASSEMBLY
1. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ Intuitive Parking Assist System) (See
INSTALLATION )
2. INSTALL NO. 1 ULTRASONIC SENSOR (w/ Intuitive Parking Assist System) (See
INSTALLATION )
3. INSTALL FRONT FENDER LINER BRACKET LH
a. Attach the 2 claws to install the bracket.
Fig. 18: Identifying Front Fender Liner Bracket LH Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
4. INSTALL FRONT FENDER LINER BRACKET RH
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
HINT:
Use the same procedures described for the LH side.
5. INSTALL FRONT VALANCE PANEL
a. Install the panel with the 10 bolts and 2 nuts.
Torque: for bolt
5.4 N*m (55 kgf*cm, 48 in.*lbf)
for nut
5.4 N*m (55 kgf*cm, 48 in.*lbf)
Fig. 19: Identifying Front Valance Panel Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
6. INSTALL FRONT BUMPER HOLE COVER LH (w/o Fog Light)
a. Attach the 3 claws to install the hole cover.
Fig. 20: Identifying Front Bumper Hole Cover LH Screws And Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Exterior - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст