Toyota Tundra. Manual — part 2318
b
Remove the terminal cap and nut, and disconnect the generator wire
c
Remove the bolt and disconnect the wire harness bracket from the generator
Fig. 52: Identifying Wire Harness Bracket Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d
Remove the 2 bolts, 2 nuts and generator
Fig. 53: Identifying Generator Stud Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e
Remove the 2 stud bolts
23
REMOVE NO. 1 WATER BYPASS HOSE
a
Remove the No 1 water bypass hose by disconnect the hose from the water inlet housing and front
water bypass joint
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
Fig. 54: Identifying No. 1 Water Bypass Hose Joint
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
24
REMOVE WATER BYPASS PIPE SUB-ASSEMBLY
a
Remove the bolt and disconnect the air tube
Fig. 55: Identifying Air Tube Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Disconnect the 2 hoses
c
Remove the 2 bolts and water bypass pipe
Fig. 56: Identifying Water Bypass Pipe Bolts And Hoses
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
25
REMOVE FRONT WATER BYPASS JOINT
a
Disconnect the No 2 water bypass hose from the water bypass joint
b
Remove the 4 nuts, water bypass joint and 2 gaskets
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
Fig. 57: Identifying Water Bypass Hose From Water Bypass Joint Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
26
REMOVE NO. 2 ENGINE COVER (See REMOVAL )
27
REMOVE NO. 1 ENGINE COVER (See REMOVAL )
28
REMOVE AIR TUBE SUB-ASSEMBLY
a
Remove the bolt, disconnect the 2 hoses, and remove the air tube
Fig. 58: Identifying Air Tube Sub-Assembly Hoses And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
29
REMOVE WATER INLET HOUSING
a
Remove the 3 bolts, water inlet housing and gasket
Fig. 59: Identifying Water Inlet Housing And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
30
REMOVE WATER PUMP PULLEY
a
Using SST, hold the water pump pulley
SST 09960-10010 (09962-01000, 09963-01000)
b
Remove the 4 bolts and water pump pulley
Fig. 60: Identifying Water Pump Pulley Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
31
REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY
a
Remove the bolt and idler pulley
Fig. 61: Identifying Idler Pulley Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
32
REMOVE FAN BRACKET ASSEMBLY
a
Remove the 4 bolts and fan bracket
2009 Toyota Tundra
2009 ENGINE Lubrication (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст