Toyota Tundra. Manual — part 2027
Arrange the removed parts in the correct order
e
Remove the No 3 and No 4 camshafts
35
REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY LH
a
Remove the camshaft housing by prying between the cylinder head and camshaft housing with a
screwdriver
HINT:
Tape the screwdriver tip before use
NOTE:
Be careful not to damage the contact surfaces of the cylinder head
and camshaft housing.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 273: Removing Camshaft Housing
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
36
REMOVE CAMSHAFT BEARING CAP RH
a
Make sure that the knock pin of the camshaft is positioned as shown in the illustration
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 274: Identifying Position For Knock Pin Of Camshaft
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Uniformly loosen and remove the 10 bearing cap bolts in the sequence shown in the illustration
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 275: Identifying Bearing Cap Bolts Loosening Sequence
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c
Uniformly loosen and remove the 18 bearing cap bolts in the sequence shown in the illustration
Fig. 276: Identifying Bearing Cap Bolts Loosening Sequence
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
d
Remove the 6 bearing caps
HINT:
Arrange the removed parts in the correct order
e
Remove the No 1 and No 2 camshafts
37
REMOVE CAMSHAFT HOUSING SUB-ASSEMBLY RH
a
Remove the camshaft housing by prying between the cylinder head and camshaft housing with a
screwdriver
HINT:
NOTE:
Uniformly loosen the bolts while keeping the camshaft level.
NOTE:
Be careful not to damage the contact surfaces of the cylinder head
and camshaft housing.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст