Toyota Tundra. Manual — part 2028
Tape the screwdriver tip before use
Fig. 277: Removing Camshaft Housing
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
38
REMOVE VALVE ROCKER ARM SUB-ASSEMBLY
a
Remove the 32 valve rocker arms from the cylinder head
HINT:
Arrange the removed parts in the correct order
39
REMOVE VALVE LASH ADJUSTER ASSEMBLY
a
Remove the 32 valve lash adjusters from the cylinder head
HINT:
Arrange the removed parts in the correct order
40
REMOVE VALVE STEM CAP
a
Remove the 32 valve stem caps from the cylinder head
HINT:
Arrange the removed parts in the correct order
41
REMOVE CYLINDER HEAD SUB-ASSEMBLY LH (See REMOVAL )
42
REMOVE CYLINDER HEAD SUB-ASSEMBLY RH (See REMOVAL )
43
REMOVE CYLINDER HEAD GASKET LH
44
REMOVE CYLINDER HEAD GASKET RH
45
REMOVE CYLINDER BLOCK WATER JACKET SPACER
a
Remove the 2 water jacket spacers from the cylinder head
NOTE:
Be sure to remove the water jacket spacers. If not, they may fall and
become damaged when the cylinder block is inverted.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 278: Locating Water Jacket Spacers On Cylinder Head
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
46
REMOVE OIL RETURN PIPE GASKET
a
Using a screwdriver, pry out the oil return pipe gasket
HINT:
Tape the screwdriver tip before use
Fig. 279: Removing Oil Return Pipe Gasket
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
47
REMOVE VENTILATION PIPE GASKET
a
Using a screwdriver, pry out the ventilation pipe gasket
HINT:
Tape the screwdriver tip before use
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Fig. 280: Removing Ventilation Pipe Gasket
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
48
REMOVE NO. 1 HEAT EXCHANGER COVER
a
Remove the 12 bolts and 2 nuts
Fig. 281: Locating No. 1 Heat Exchanger Cover Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Remove the heat exchanger by prying between the heat exchanger and cylinder block with a
screwdriver
HINT:
Tape the screwdriver tip before use
Fig. 282: Removing Heat Exchanger
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
49
REMOVE NO. 2 OIL PAN SUB-ASSEMBLY
a
Remove the 14 bolts and 2 nuts
Fig. 283: Locating No. 2 Oil Pan Sub-Assembly Bolts And Nuts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b
Insert the blade of oil pan seal cutter between the oil pans Cut through the applied sealer and
remove the No 2 oil pan
Fig. 284: Inserting Blade Of Oil Pan Seal Cutter Between Crankcase And Oil Pan
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
50
REMOVE NO. 1 OIL PAN SUB-ASSEMBLY
a
Remove the 14 bolts and 2 nuts
HINT:
Be sure to clean the bolts and stud bolts, and check the threads for cracks or other damage
NOTE:
Be careful not to damage the contact surfaces of the oil pans.
2009 Toyota Tundra
2009 ENGINE Engine Mechanical (3UR-FE) - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст