Toyota Tundra. Manual — part 879
Fig. 88: Locating Outer Lap Belt Anchor Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Detach the 4 clips and remove the quarter trim panel.
Fig. 89: Locating Quarter Trim Panel Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
29. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY RH
a. Detach the 2 claws and remove the cover.
Fig. 90: Identifying Lower Quarter Trim Panel Assembly Claws
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the bolt and outer lap belt anchor.
Fig. 91: Locating Outer Lap Belt Anchor Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Detach the 3 clips and remove the quarter trim panel.
Fig. 92: Identifying Quarter Trim Panel Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
30. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH
a. Using a screwdriver, detach the claw and remove the cover.
HINT:
Tape the screwdriver tip before use.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
Fig. 93: Identifying Protective Tape
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the 2 bolts.
c. Detach the 4 clips.
d. Pass the rear seat outer belt floor anchor through the quarter trim panel, and remove the quarter trim
panel.
Fig. 94: Identifying Front Quarter Trim Panel Assembly Clips And Bolts
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
31. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
32. REMOVE REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH
a. Detach the 4 claws of the plate, and slide the plate in the direction of the arrow to remove it.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
Fig. 95: Identifying Rear Shoulder Belt Anchor Plate
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
33. REMOVE REAR SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
34. REMOVE ROOF CONSOLE BOX ASSEMBLY
a. for Short Type:
Remove the roof console box (see REMOVAL ).
b. for Long Type:
Remove the roof console box (see REMOVAL ).
35. REMOVE ROOM LIGHT ASSEMBLY
a. w/o Rear Seat Entertainment System:
Remove the room light.
1. Using a screwdriver, detach the 4 claws and remove the lens.
HINT:
Tape the screwdriver tip before use.
2. Detach the 4 clips.
3. Disconnect the connector and then remove the room light.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст