Toyota Tundra. Manual — part 878
Fig. 80: Identifying Lower Center Pillar Garnish Cover Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the bolt and outer lap belt anchor.
Fig. 81: Locating Outer Lap Belt Anchor Bolt
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Detach the 7 clips and 2 claws, and remove the center pillar garnish.
Fig. 82: Identifying Center Pillar Garnish Claws And Clips
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
21. REMOVE LOWER CENTER PILLAR GARNISH RH
HINT:
Use the same procedures described for the LH side.
22. REMOVE CENTER PILLAR GARNISH LH
a. Using a screwdriver, detach the 2 claws and remove the 2 assist grip plugs.
HINT:
Tape the screwdriver tip before use.
b. Remove the 2 bolts and assist grip.
c. Remove the 2 screws.
d. Detach the claw.
e. Pass the front seat outer belt floor anchor through the center pillar garnish, and remove the center
pillar garnish.
Fig. 83: Identifying Center Pillar Garnish
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
23. REMOVE CENTER PILLAR GARNISH RH
HINT:
Use the same procedures described for the LH side.
24. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY LH
a. Detach the 6 claws of the plate, and slide the plate in the direction of the arrow to remove it.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
Fig. 84: Identifying Front Shoulder Belt Anchor Plate Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
25. REMOVE FRONT SHOULDER BELT ANCHOR PLATE SUB-ASSEMBLY RH
HINT:
Use the same procedures described for the LH side.
26. REMOVE BACK PANEL TRIM RH
a. Remove the package holder net hook.
b. Detach the 8 clips and remove the back panel trim.
Fig. 85: Identifying Package Holder Net Hook
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
27. REMOVE BACK PANEL TRIM LH
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
a. Remove the package holder net hook.
b. Detach the 8 clips and remove the back panel trim.
Fig. 86: Identifying Package Holder Net Hook
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
28. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY LH
a. Detach the 2 claws and remove the cover.
Fig. 87: Identifying Lower Quarter Trim Panel Assembly Claws
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Remove the bolt and outer lap belt anchor.
2009 Toyota Tundra
2009 ACCESSORIES AND EQUIPMENT Interior - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст