Toyota Tundra. Manual — part 2903
Fig. 528: Identifying Flange, Discs, Plates & Selected Flange
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
10. INSTALL NO. 3 1-WAY CLUTCH INNER RACE
a. Install the 1-way clutch inner race to the No. 3 1-way clutch assembly.
Fig. 529: Identifying 1-Way Clutch Inner Race & No. 3 1-Way Clutch Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
11. INSPECT NO. 3 1-WAY CLUTCH ASSEMBLY (See INSPECTION )
12. INSTALL NO. 3 1-WAY CLUTCH ASSEMBLY
a. Install the 1-way clutch assembly to the transmission case.
NOTE:
Do not mistake the direction of the 1-way clutch inner race.
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
Fig. 530: Identifying 1-Way Clutch Assembly
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
b. Using SST, install the snap ring.
SST 09350-30020 (09350-07060)
Fig. 531: Using SST To Install Snap Ring
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
13. INSTALL NO. 2 BRAKE PISTON
a. Coat 2 new O-rings with ATF, and install them to the brake piston.
b. Press the brake piston into the brake cylinder with both hands.
Fig. 532: Identifying No. 2 Brake Piston O-Rings
NOTE:
Be careful not to damage the O-rings.
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
14. INSTALL NO. 2 BRAKE CYLINDER WITH NO. 2 BRAKE PISTON
a. Install the No. 2 brake cylinder with piston to the transmission case.
Fig. 533: Identifying No. 2 Brake Cylinder With Piston
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
15. SELECT NO. 2 BRAKE FLANGE
a. Install the No. 2 brake piston return spring and flange on the No. 2 brake piston.
b. Place SST on the brake flange and compress the brake return spring.
SST 09380-60010 (09381-06010, 09381-06020, 09381-06050, 09381-06070, 09381-06090, 09381-
06120)
NOTE:
When installing the No. 2 brake cylinder with piston to the
transmission case, align and install the cylinder's claw to the
case's top groove.
Make sure the No. 2 brake cylinder with piston is securely
inserted into the transmission case.
Fig. 534: Identifying Cylinder's Claw
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
Fig. 535: Placing SST On No. 2 Brake Flange
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
c. Using a screwdriver, install the snap ring to the transmission case.
d. Measure distance A (from the top surface of the snap ring to the bottom surface of the brake piston
return spring retainer) shown below. *1
HINT:
Standard distance A: 21.00 to 21.76 mm (0.834 to 0.857 in.)
Fig. 536: Identifying Distance A Between Top Surface Of Snap Ring To Top Surface Of
Brake Piston Return Spring Retainer
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
e. Assemble the 4 discs, 3 plates and flange as shown below. Then with a fixture of 165.2 mm (6.50
in.) or less placed on the flange, measure distance B. *2
2009 Toyota Tundra
2009 TRANSMISSION AB60F Automatic Transaxle - Tundra
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст